Search results

Utilizing electrical discharge machining (EDM) to process micro-holes in superalloys may lead to the formation of remelting layers and micro-cracks on the machined surface. This work proposes a method of composite processing of EDM and ultrasonic vibration drilling for machining precision micro-holes in complex positions of superalloys.

A six-axis computer numerical control (CNC) machine tool was developed, whose software control system adopted a real-time control architecture that integrates electrical discharge and ultrasonic vibration drilling. Among them, the CNC system software was developed based on Windows + RTX architecture, which could process the real-time processing state received by the hardware terminal and adjust the processing state. Based on the SoC (System on Chip) technology, an architecture for a pulse generator was developed. The circuit of the pulse generator was designed and implemented. Additionally, a composite mechanical system was engineered for both drilling and EDM. Two sets of control boards were designed for the hardware terminal. One set was the EDM discharge control board, which detected the discharge state and provided the pulse waveform for turning on the transistor. The other was a relay control card based on STM32, which could meet the switch between EDM and ultrasonic vibration, and used the Modbus protocol to communicate with the machining control software.

The mechanical structure of the designed composite machine tool can effectively avoid interference between the EDM spindle and the drilling spindle. The removal rate of the remelting layer on 1.5 mm single crystal superalloys after composite processing can reach over 90%. The average processing time per millimeter was 55 s, and the measured inner surface roughness of the hole was less than 1.6 µm, which realized the  micro-hole machining without remelting layer, heat affected zone and micro-cracks in the single crystal superalloy.

The test results proved that the key techniques developed in this paper were suite for micro-hole machining of special materials.

Additively manufactured objects have layered structures, which means post processing is often required to achieve a desired surface finish. Furthermore, the additive nature of the process makes it less accurate than subtractive processes. Hence, additive manufacturing techniques could tremendously benefit from finishing processes to improve their geometric tolerance and surface finish.

Rotary ultrasonic machining (RUM) was chosen as a finishing operation for drilling additively manufactured carbon fiber reinforced polymer (CFRP) composites. Two distinct additive manufacturing methods of fused deposition modeling (FDM) and laser-assisted laminated object manufacturing (LA-LOM) were used to fabricate CFRP plates with continuous carbon fiber reinforcement. The influence of the feedrate, tool rotation speed and ultrasonic power of the RUM process parameters on the aforementioned quality characteristics revealed the feasibility of RUM process as a finishing operation for additive manufactured CFRP.

The quality of drilled holes in the CFRP plates fabricated via LA-LOM was supremely superior to the FDM counterparts with less pullout delamination, smoother surface and less burr formation. The strong interfacial bonding in LA-LOM proven to be superior to FDM was able to endure higher cutting force of the RUM process. The cutting force and cutting temperature overwhelmed the FDM parts and induced higher surface damage.

Overall, the present study demonstrates the feasibility of a hybrid additive and subtractive manufacturing method that could potentially reduce cost and waste of the CFRP production for industrial applications.

This review paper reveals the literature on ultrasonic, chemical-assisted ultrasonic and rotary ultrasonic machining (USM) of glass material. The purpose of this review paper is to understand and describe the working principle, mechanism of material removal, experimental investigation, applications and influence of input parameters on machining characteristics. The literature reveals that the ultrasonic machines have been generally preferred for the glass and brittle work materials. Some other non-traditional machining processes may thermally damage the work surface. Through these USM, neither thermal effects nor residual stresses have been generated on the machined surface.

Various input parameters have the significant role in machine performance characteristics. For the optimization of output response, several input parameters have been critically investigated by the various researcher.

Some advance types of glasses such as polycarbonate bulletproof glass, acrylic heat-resistant glass and glass-clad polycarbonate bulletproof glass still need some further investigation because these materials have vast applications in automobile, aerospace and space industries.

Review paper will be beneficial for industrial application and the various young researcher. Paper reveals the detail literature review on traditional ultrasonic, chemical assisted ultrasonic and rotary USM of glass and glass composite materials.

Unconventional machining processes, particularly ultrasonic vibration cutting (UVC), can overcome such technical bottlenecks. However, the precise mechanism through which UVC affects the in-service functional performance of advanced aerospace materials remains obscure. This limits their industrial application and requires a deeper understanding.

The surface integrity and in-service functional performance of advanced aerospace materials are important guarantees for safety and stability in the aerospace industry. For advanced aerospace materials, which are difficult-to-machine, conventional machining processes cannot meet the requirements of high in-service functional performance owing to rapid tool wear, low processing efficiency and high cutting forces and temperatures in the cutting area during machining.

To address this literature gap, this study is focused on the quantitative evaluation of the in-service functional performance (fatigue performance, wear resistance and corrosion resistance) of advanced aerospace materials. First, the characteristics and usage background of advanced aerospace materials are elaborated in detail. Second, the improved effect of UVC on in-service functional performance is summarized. We have also explored the unique advantages of UVC during the processing of advanced aerospace materials. Finally, in response to some of the limitations of UVC, future development directions are proposed, including improvements in ultrasound systems, upgrades in ultrasound processing objects and theoretical breakthroughs in in-service functional performance.

This study provides insights into the optimization of machining processes to improve the in-service functional performance of advanced aviation materials, particularly the use of UVC and its unique process advantages.

The purpose of this paper, an original research paper, is to study the optimization of material removal rate (MRR) in ultrasonic machining of polycarbonate bulletproof glass and acrylic heat-resistant glass. The machining of these materials is a very tough job. There are so many constraints which need to be taken into account while machining, but without proper knowledge of material properties and machining parameters, machining is not possible. This paper gives basic knowledge about polycarbonate bulletproof and acrylic heat-resistant glass and provides ways as to how these types of materials are processed or machined.

The Taguchi method was utilized to optimize the ultrasonic machining parameters for drilling these advanced materials. The relationship between MRR and other controllable process parameters such as concentration of slurry, type of abrasive, abrasive grit size, power rating, concentration of HF acid and type of tool material has been analyzed by using the Taguchi approach.

Through the Taguchi analysis, it is concluded that types of abrasive and HF acid concentrations have a significant role to play in MRR for both materials; in which, type of abrasive have 72.91 and 72.96 percent contribution in MRR for polycarbonate bulletproof and acrylic heat-resistant glass, respectively. Similarly, HF acid concentration has 14.70 and 14.65 percent contribution in MRR for polycarbonate bulletproof and acrylic heat-resistant glass, respectively. The MRR was improved by 34.44 percent in polycarbonate bulletproof glass and 29.25 percent in acrylic heat-resistant glass.

After experimental investigation, the results of the Taguchi modal are validated.

TODAY, as a result of so‐called technical advance, few individuals remain. Save, perhaps, in the arts, few jobs are completed by one man; the accent is on team work with each member doing part of a job.

This paper aims to develop a mathematical model for delamination during end milling by using response surface methodology (RSM) and to determine how the input parameters (cutting speed, depth of cut and feed rate) influence the output response (delamination) in machining of hybrid glass fibre reinforced plastic (GFRP; abaca and glass) composite using solid carbide end mill cutter.

Three factors, three levels Box–Behnken design in RSM is used to carry out the experimental investigation. Shop microscope Mitutoyo TM-500 is used to measure the width of maximum damage of the machined hybrid GFRP composites. The “Design Expert 8.0” is used to analyse the data collected graphically. Analysis of variance is carried out to validate the model and for determining the most significant parameter.

The RSM is used to predict the input factors influencing the delamination on the machined surfaces of hybrid GFRP composite at different cutting conditions with the chosen range of 95 per cent confidence intervals. Analysis on the influences of the entire individual input machining parameters on the delamination has been carried out using RSM.

Effect of milling of hybrid GFRP composite on delamination with solid carbide end mill has not been analysed yet using RSM.

This paper aims to develop a mathematical model for analysing surface roughness during end milling by using response surface methodology (RSM) and to determine how the input parameters (cutting speed, depth of cut and feed rate) influence the output parameter (surface roughness) in the machining of hybrid glass fibre reinforced plastic (GFRP; Abaca and Glass) composite by using solid carbide end mill cutter.

Three factors and a three-level Box–Behnken design in RSM were used to carry out the experimental investigation. Handysurf E-35A was used to measure the surface roughness of the machined hybrid GFRP composites. The “Design Expert 8.0” was used to analyse the data collected graphically. Analysis of variance was carried out to validate the model and determine the most significant parameter.

The response surface model was used to predict the input factors influencing the surface roughness of the machined surfaces of hybrid GFRP composite at different cutting conditions with a chosen range of 95 per cent confidence intervals. Analysis of the influences of the entire individual input machining parameters on the surface roughness carried out using RSM.

The effect of the milling of hybrid GFRP composite on the surface roughness with solid carbide end mill by using RSM has not been analysed yet.

The purpose of this paper is to investigate experimentally the effect of several input process factors, namely, feed rate, spindle speed, ultrasonic power and coolant pressure, on hole quality measures (penetration rate [PR] and chipping diameter [CD]) in rotary mode ultrasonic drilling of macor bioceramic material.

The main experiments were planned using the response surface methodology (RSM). Scanning electron microscopy was also used to examine and study the microstructure of machined samples. This study revealed the existence of dominant brittle fracture and little plastic flow that resulted in a material loss from the base work surface. Experiment findings have shown the dependability and adequacy of the proposed mathematical model.

The percentage of brittle mode deformation rises as the penetration depth of abrasives increases (at increasing levels of feed rate). This was due to the fact that at greater depths of indentation, material loss begins in the form of bigger chunks and develops inter-granular fractures. These stated causes have provided an additional advantage to increasing the CD over the machined rod of bioceramic. The desirability method was also used to optimize multi-response measured responses (PR and CD). The mathematical model created using the RSM method will be very useful in industrial revelation. Furthermore, the investigated answers’ particle swarm optimization (PSO) and teacher-learner-based optimization (TLBO) make the parametric analysis more relevant and productive for real-life industrial practices.

Macor bioceramic has been widely recognized as one of the most highly demanded innovative dental ceramics, receiving expanded industry approval because of its outstanding and superior characteristics. However, effective and efficient processing remains a problem. Among the available contemporary machining methods introduced for processing typical and advanced materials, rotary mode ultrasonic machining has been identified as one of the best suitable candidates for precise processing of macor bioceramics, as this process produces thermal damage-free profiles, as well as high accuracy and an increased material removal rate. The optimized combined setting obtained using PSO is feed rate = 0.16 mm/s, spindle speed = 4,500 rpm, ultrasonic power = 60% and coolant pressure = 280 kPa with the value of fitness function is 0.0508. The optimized combined setting obtained using TLBO is feed rate = 0.06 mm/s, spindle speed = 2,500 rpm, ultrasonic power = 60% and coolant pressure = 280 kPa with the value of fitness function is 0.1703.

This paper aims to present the main factors affecting the mechanical drilling of the printed circuit board (PCB for short) micro-holes and method of micro-ultrasonic powder molding (micro-UPM for short) by utilizing PCB micro-hole array.

To optimize the drilling process, the paper proposes the on-line monitoring methods for the drilling process including drilling force, drilling temperature, high-speed photography and vibration signals. Taking 0.10 and 0.15 mm micro-drilling as examples, the paper analyzes the drilling process of ultra-small micro-holes. Finally, by taking the PCBs with 0.10 and 0.15 mm micro-hole arrays as the micro-cavity inserts, utilizing ultra-high-molecule weight polyethylene powder with the average particle size of about 150 μm as raw material, two sizes of micro-cylinder array polymer parts are fabricated through micro-UPM process.

PCB micro-cavity inserts with micro-hole arrays fabricated by mechanical drilling has the advantages of low costs, high efficiency and good consistency. Taking 0.10 and 0.15 mm micro-drilling as examples, it is found that the both measured apertures are about 10.0 μm more than the diameter of the micro-drill bits on average. The average diameter of the micro-cylinders by micro-UPM process is smaller than that of the micro-hole with the same specification, while the value of the roughness of the cylinder surface is more than that of the hole-wall surface with the same specification.

This paper describes the challenges and the developments of mechanical drilling and by using PCB micro-cavity inserts with micro-hole arrays fabricated by mechanical drilling, two different micro-cylinder array polymer parts are successfully made and thus the application area of PCB micro-drilling is broadened.