Search results

For high crack-susceptibility materials such as Inconel 713LC (IN713LC) nickel alloy, fabricating crack-free components using the laser powder bed fusion (LPBF) technique represents a significant challenge because of the complex interactions between the effects of the main processing parameters, namely, the laser power and scanning speed. Accordingly, this study aims to build up a methodology which combines simulation model and experimental approach to fabricate high-density (>99.9%) IN713LC components using LPBF process.

The present study commences by performing three-dimensional (3D) heat transfer finite element simulations to predict the LPBF outcome (e.g. melt pool depth, temperature and mushy zone extent) for 33 representative sample points chosen within the laser power and scanning speed design space. The simulation results are used to train a surrogate model to predict the LPBF result for any combination of the processing conditions within the design space. Then, experimental trials were performed to choose the proper hatching space and also to define the high crack susceptibility criterion. The process map is then filtered in accordance with five quality criteria, namely, avoiding the keyhole phenomenon, improving the adhesion between the melt pool and the substrate, ensuring single-scan-track stability, avoiding excessive melt pool evaporation and suppressing the formation of micro-cracks, to determine the region of the process map which improves the relative density of the IN713LC component and minimizes the micro-cracks. The optimal processing conditions are used to fabricate IN713LC specimens for tensile testing purposes.

The optimal processing conditions predicted by simulation model are used to fabricate IN713LC specimens for tensile testing purposes. Experimental results show that the tensile strength and elongation of 3D-printed IN713LC tensile bar is higher than those of tensile bar made by casting. The yield strength of 791 MPa, ultimate strength of 995 MPa, elongation of 12%, and relative density of 99.94% are achieved.

The present study proposed a systematic methodology to find the processing conditions that are able to minimize the formation of micro-crack and improve the density of the high crack susceptivity metal material in LPBF process.

Depending on an experimental approach to find optimal parameters for producing fully dense (relative density > 99%) Inconel 718 (IN718) components in the selective laser melting (SLM) process is expensive and offers no guarantee of success. Accordingly, this study aims to propose a multi-scale simulation framework to guide the choice of processing parameters in a more pragmatic manner.

In the proposed approach, a powder layer, ray tracing and heat transfer simulation models are used to calculate the melt pool dimensions and evaporation volume corresponding to a small number of laser power and scanning speed conditions within the input design space. A layer-heating model is then used to determine the inter-layer idle time required to maximize the temperature convergence rate of the solidified layer beneath the power bed. The simulation results are used to train surrogate models to construct SLM process maps for 3,600 pairs of the laser power and scanning speed within the input design space given three different values of the underlying solidified layer temperature (i.e., 353 K, 673 K and 873 K). The ideal selection of laser power and scanning speed of each process map is chosen based on four quality-related criteria listed as follows: without the appearance of key-hole melting; an evaporation volume less than the volume of the d90 powder particles; ensuring the stability of single scan tracks; and avoiding a weak contact between the melt pool and substrate. Finally, the optimal laser power and scanning speed parameters for the SLM process are determined by superimposing the optimal regions of the individual process maps.

The feasibility of the proposed approach is demonstrated by fabricating IN718 test specimens using the optimal processing conditions identified by the simulation framework. It is shown that the maximum density of the fabricated parts is 99.94%, while the average density is 99.88% and the standard deviation is less than 0.05%.

The present study proposed a multi-scale simulation model which can efficiently predict the optimal processing conditions for producing fully dense components in the SLM process. If the geometry of the three-dimensional printed part is changed or the machine and powder material is altered, users can use the proposed method for predicting the processing conditions that can produce the high-density part.