Search results

To treat water pollution, especially the contamination resulted from organic dyes has aroused significant attention around the world, this study aims to prepare the metal organic framework (MOF) materials hybridizing with poly(p-phenylene terephthalamide) (PPTA) by means of a facile refluxing method and to systematically investigate adsorption performance for anionic dye Congo red as target molecule from aqueous solution.

The MOF materials hybridized by PPTA were fabricated by virtue of a facile refluxing method, characterized by thermogravimetric analysis, X-ray powder diffraction, Fourier transform infrared and pore structure.

The results showed that pseudo-second-order kinetic model could better describe the adsorption process for all the four materials, whereas Elovich model also fitted the process for the hybrid materials with PPTA. Adsorption isotherm analyses indicated that Langmuir isotherm could be used to describe the adsorption process. Introduction of appropriate amount of PPTA could enhance the adsorption affinity of the MOF materials for Congo red, and the maximum adsorption capacity could reach as high as 1,053.41 mg/g while that of the MOF material without PPTA was 666.67 mg/g, indicating introduction of PPTA could change the microenvironment of the MOF materials and increase the adsorption sites, leading to high adsorption efficiency.

The microstructure of MOF hybridized materials in detail is the further and future investigation.

This study will provide a method to prepare MOF materials with high efficiency to treat anionic dyes like Congo red from aqueous solution.

Owing to the special characteristics of PPTA and similar to carbon tube, PPTA was introduced into MOF material to increased corresponding water stability. Because of aromatic ring and amide group on the surface of PPTA, the adsorption efficiency of the hybridized MOF material with appropriate amount of PPTA was greatly enhanced.

The purpose of this study was to prepare carboxylated attapulgite (APT-COOH) and then be used as one of the ligands to prepare metal organic framework (MOF) hybrid materials to reduce the cost of MOF materials and improve the dispersed condition of APT. And then the materials were used to enrich anionic dye Congo red from aqueous solution.

The MOF hybrid materials were designed by means of facile reflux method rather than hydrothermal method, characterized by Thermogravimetric Analysis (TGA), Fourier Transform Infrared (FTIR) Spectrometer and pore structure. The dispersed degree of APT-COOH in the MOF materials was validated according to adsorption efficiency for Congo red.

Due to introduction of APT-COOH, the microenvironment of the MOF materials changed, leading to different adsorption behaviors. Compared to the MOF material without APT-COOH, the adsorption capacities of the hybridized MOF materials with different amounts of APT-COOH introduced increased by 4.58% and 15.55%, respectively, as the initial concentration of Congo red solution of 300 mg/L. Meantime, hybridized MOF materials were suitable to remove Congo red with low concentration, while the MOF material without APT-COOH was appropriate to enrich Congo red with high concentration.

The microstructure of MOF hybrid materials in detail is the further and future investigation.

This study will provide a method to reduce the cost of MOF materials and a theoretical support to treat anionic dyes from aqueous solution.

APT-COOH was prepared and used as one of the ligands to synthesize MOF material to improve the dispersed degree of APT-COOH and reduce the cost of the MOF materials. The adsorption efficiency was greatly enhanced with low concentration of Congo red solution, and the results indicated that hydrogen bonding, electrostatic interaction, and p-p conjugation were involved in the adsorption process. The prepared MOFs materials exhibited excellent adsorption efficiency, which made the present materials highly promising and potentially useful in practical application as adsorbents to enrich anionic dyes such as Congo red from aqueous solution.

This paper aims to focus on the preparation of Kevlar fiber (KF) and alkaline hydrolyzed KF (KF-H) to improve the dispersed condition of polyaniline (PAn), as the aggregation of PAn would lead to some adsorption sites buried. And then the materials were used to enrich anionic dye Congo red (CR) from aqueous solution.

The materials (KF@PAn and KF-H@PAn) were designed by means of “diffusion-interfacial-polymerization” under mild condition as high affinity due to the structural properties of PAn, KF and KF-H. The dispersed degree of PAn on the surface of KF and KF-H was validated according to adsorption efficiency for CR.

The content of PAn introduced was not beyond 20 wt.%, while adsorption capacity for CR was significantly enhanced by 4–8 times (on the basis of kinetic data) according to the calculation only by the content of PAn due to KF and alkaline hydrolyzed KF exhibited almost no adsorption for CR, indicating dispersed situation of PAn coating was greatly enhanced and more active sites exposed, which was favorable for the adsorption process. Presence of NaCl would exhibit a more or less positive effect on CR uptake, suggesting the materials could be used for high salt environment.

The investigated means of dispersed degree of PAn on the surface of KF and KF-H are the further and future investigation.

This study will provide a method to improve the dispersed situation of PAn and a theoretical support to treat anionic dyes from aqueous solution especially for salt environment.

The results showed that the dispersed condition of PAn on the surface of KF and KF-H was greatly improved. According to the adsorption capacities for CR, it can be concluded that part of adsorption sites were buried due to the aggregation of PAn, and introduction of KF and KF-H, buried adsorption sites decreased greatly. This study will provide a method to decrease buried adsorption sites of PAn and a contribution for their convenient application in wastewater treatment especially for high salt environment.