Search results

This paper aims to present the main results achieved in the frame of the TIVANO national-funded project which may anticipate, in a stepped approach, the evolution and the design of the enabling technologies needed for a hybrid/electric medium altitude long endurance (MALE) unmanned aerial vehicle (UAV) to perform persistent intelligence surveillance reconnaissance (ISR) military operations.

Different architectures of hybrid-propulsion system are analyzed pointing out their operating modes to select the more suitable architecture for the reference aircraft. The selected architecture is further analyzed together with its electric power plant branch focusing on electric system architecture and the selected electric machine. A final comparison between the hybrid and standard propulsion is given at aircraft level.

The use of hybrid propulsion may lead to a reduction of the total aircraft mass and an increase in safety level. However, this result comes together with a reduced performance in climb phase.

This study can be used as a reference for similar studies and it provides a detailed description of propulsion operating modes, power management, electric system and machine architecture.

This study presents a novel application of hybrid propulsion focusing on a three tons class MALE UAV for ISR missions. It provides new operating modes of the propulsion system and a detailed electric architecture of its powertrain branch and machine. Some considerations on noise emissions and infra-red traceability of this propulsion, at aircraft level.

The purpose of this paper is to analyze the electric propulsion use in civil aviation and propose a framework for certification of electric propulsion subsystems. Although electric propulsion architectures are discussed as key technology for the future of aviation, the industry standards as well as regulations fail to cover the application in full extent, specifically for commercial large airplanes. This paper proposes an approach for the analyses of reliability and certification of the new-generation propulsion system by pointing out the “common structure” among the possible architectures.

The research process used in this paper consists of following steps: the challenges of the hybrid-electric propulsion is listed, the architectures of the hybrid-electric applications in the literature are identified, the differences of the hybrid architectures from the present applications by means of application and standardization are discovered, the architectures are analyzed and the two main subsystems are defined – the present combustion system and the common unit, which is a similar structure used in all-electric aircraft. For this purpose, the standards used for design basis and certification of the present propulsion system and their relationship with the subsystems of the architectures have been analyzed. The procedure for the reliability assessment of the system is given, a framework for the safety assessment and the certification of the propulsion systems is proposed to make it easier and without sacrificing the already accumulated experience. This study shows that by using the common unit, the present certification framework can be used, by focusing on the reliability of the common unit and its integration with the rest of the architecture.

A specific definition of common unit is proposed, to point out the difference in certification efforts of hybrid-electric propulsion architectures. Yet, there is no data available for propulsion-level airborne battery and electrical systems to assess the reliability. Thus, dividing the propulsion system into two main systems and providing a model for certification of the common unit sub-system would be beneficial for easy deployment of the hybrid architectures both for design and for certification. In this paper, it is proposed that by using this common unit, the present certification framework can be used as it is, by focusing on the reliability of the common unit and its integration with the rest of the architecture.

The aircraft certification regulations act in two ways: they provide a starting point for new design projects, and they are a basis for certification of the final system. This study aims to draw focus on certification issues on the new-generation hybrid-electric propulsion systems. With the introduction of hybrid-electric propulsion for large aircraft, the present standards (CS-25, CS-E, CS-P, CS-Battery and CS-APU) create an obstacle for further progress as their borders get into each other. Instead of developing a new set of standard(s), this paper proposes a new approach by dividing the propulsion system into two subsystems.

This research proposes a definition of “common unit” for simplification of the hybrid-electric propulsion architectures for large civil aircraft. The common unit consists of both battery and electrical components and their reliability shall be considered for hybrid-electric propulsion.

With the objective to assess potentially performant hybrid-electric architectures, this paper aims to present an aircraft performance level evaluation, in terms of range and payload, of the synergies between a hybrid-electric energy system configuration and a cryogenic fuel system.

An unmanned aerial vehicle (UAV) is modeled using an aircraft performance tool, modified to take into account the hybrid nature of the system. The fuel and thermal management systems are modeled looking to maximize the synergistic effects. The electrical system is defined in series with the thermal engine and the performance, in terms of weight and efficiency, are tracked as a function of the cooling temperature.

The results show up to a 46 per cent increase in range and up to 7 per cent gain on a payload with a reference hybrid-electric aircraft that uses conventional drop-in JP-8 fuel. The configuration that privileges a reduction in mass of the electric motors by taking advantage of the cryogenic coolant temperature shows the highest benefits. A sensitivity study is also presented showing the dependency on the modeling capabilities.

The synergistic combination of a cryogenic fuel and the additional heat sources of a hybrid-electric system with a tendency to higher electric component efficiency or reduced weight results in a considerable performance increase in terms of both range and payload.

The potential synergies between a cryogenic fuel and the electrical system of a hybrid-electric aircraft seem clear; however, at the present, no detailed performance evaluation at aircraft level that includes the fuel, thermal management and electric systems, has been published.

The purpose of this study is to examine state-of-the-art in hybrid-electric propulsion system modeling and suggest new methodologies for sizing such advanced concepts. Many entities are involved in the modelling and design of hybrid electric aircraft; however, the highly multidisciplinary nature of the problem means that most tools focus heavily on one discipline and over simplify others to keep the analysis reasonable in scope. Correctly sizing a hybrid-electric system requires knowledge of aircraft and engine performance along with a working knowledge of electrical and energy storage systems. The difficulty is compounded by the multi-timescale dynamic nature of the problem. Furthermore, the choice of energy management in a hybrid electric system presents multiple degrees of freedom, which means the aircraft sizing problem now becomes not just a root-finding exercise, but also a constrained optimization problem.

The hybrid electric vehicle sizing problem can be sub-divided into three areas: modelling methods/fidelity, energy management and optimization technique. The literature is reviewed to find desirable characteristics and features of each area. Subsequently, a new process for sizing a new hybrid electric aircraft is proposed by synthesizing techniques from model predictive control and detailed conceptual design modelling. Elements from model predictive control and concurrent optimization are combined to formulate a new structure for the optimization of the sizing and energy management of future aircraft.

While the example optimization formulation provided is specific to a hybrid electric concept, the proposed structure is general enough to be adapted to any vehicle concept which contains multiple degrees of control freedom that can be optimized continuously throughout a mission.

The proposed technique is novel in its application of model predictive control to the conceptual design phase.

Parallel hybrid electric (HE) propulsion retrofit is a promising alternative to reduce fuel burn of aircraft operating on short regional flights. However, if the batteries are depleted at the end of the mission, the hybrid powertrain designs with downsized gas turbines (GTs) and additional electric motors might not meet the one-engine inoperative (OEI) missed approach climb performance required by the certification. Alternatively, hybrid designs using the original full-size GT can perform one engine climb without electric assistance. This paper aims to evaluate the impact of overshoot climb requirements on powertrain design and performance comparing the two design approaches.

An aircraft-level parametric mission analysis model is used to evaluate aircraft performance combined with an optimization framework including multiple constraints. An indirect approach using metamodels is used to optimize powertrain sizing and operation strategy.

Considering OEI climb requirements, no benefits were found using a design with downsized GTs. Equivalent fuel burns were found for hybrid designs that keep the original size GTs, but do not require electric energy for the OEI overshoot at the end of the mission. Then, it is recommended to size the GT to maintain the emergency climb capabilities with no electric assistance to ensure power availability regardless of remaining battery energy.

This work introduces a new perspective on parallel HE sizing with consideration for the dependency of power capability at aircraft level on the electric energy availability in case of critical mission scenarios such as overshoot climb at the end of the mission.

A hybrid-electric unmanned aerial vehicle (HE-UAV) model has been developed to address the problem of low endurance of a small electric UAV. Electric-powered UAVs are not capable of achieving a high range and endurance due to the low energy density of its batteries. Alternatively, conventional UAVs (cUAVs) using fuel with an internal combustion engine (ICE) produces more noise and thermal signatures which is undesirable, especially if the air vehicle is required to patrol at low altitudes and remain undetected by ground patrols. This paper aims to investigate the impact of implementing hybrid propulsion technology to improve on the endurance of the UAV (based on a 13.6 kg UAV).

A HE-UAV model is developed to analyze the fuel consumption of the UAV for given mission profiles which were then compared to a cUAV. Although, this UAV size was used as reference case study, it can potentially be used to analyze the fuel consumption of any fixed wing UAV of similar take-off weight. The model was developed in a Matlab-Simulink environment using Simulink built-in functionalities, including all the subsystem of the hybrid powertrain. That is, the ICE, electric motor, battery, DC-DC converter, fuel system and propeller system as well as the aerodynamic system of the UAV. In addition, a ruled-based supervisory controlled strategy was implemented to characterize the split between the two propulsive components (ICE and electric motor) during the UAV mission. Finally, an electrification scheme was implemented to account for the hybridization of the UAV during certain stages of flight. The electrification scheme was then varied by changing the time duration of the UAV during certain stages of flight.

Based on simulation, it was observed a HE-UAV could achieve a fuel saving of 33% compared to the cUAV. A validation study showed a predicted improved fuel consumption of 9.5% for the Aerosonde UAV.

The novelty of this work comes with the implementation of a rule-based supervisory controller to characterize the split between the two propulsive components during the UAV mission. Also, the model was created by considering steady flight during cruise, but not during the climb and descend segment of the mission.

In more than 100 years of aviation, significant progress has been made in flight control systems. The aircrafts that have entered service for the past ten years tend towards power-by-wire flight control with electrical actuators. The purpose of this study is to analyse the effects of electrical actuation on power consumption, weight and fuel consumption on a commercial transport aircraft.

The Airbus A321-200 aircraft was chosen as a case study for analysing the effects of electrical actuation on the flight control actuation system (FCAS) architecture, and Pacelab SysArc software was used for design, modelling and analysis. As alternatives to the existing system, hybrid and all-electric models are built to a set of design guidelines with certain limitations.

Compared to the existing FCAS architecture model, 80 kg weight savings in the hybrid FCAS architecture model and 171 kg weight savings in the all-electric FCAS architecture model were observed. In terms of fuel consumption, it has been observed that there is 0.25% fuel savings in the hybrid FCAS architecture model, and 0.48% fuel savings in the all-electric FCAS architecture model compared to the existing FCAS architecture model at 3200 NM.

In line with the data obtained from this study, it is predicted that electrical actuation is more preferable in aircraft, considering its positive effects on weight and fuel consumption.

In this study, three different models were created: the existing FCAS architecture of a commercial transport aircraft, the hybrid FCAS architecture and the all-electric FCAS architecture. Hybrid and all-electric models are built according to a set of design guidelines, with certain limitations. Then, similar flight missions consisting of the same flight conditions are defined to analyse the effects of power consumption, weight, and fuel consumption comparatively.

This paper addressed some critical issues in the development of hybrid electric powertrains for aircraft and propose a design methodology based on multi-objective optimization algorithms and mission-based simulations.

Scalable models were used for the main components of the powertrain, namely, the (two stroke diesel) engine, the (lithium) batteries and the (permanent magnet) motor. The optimization was performed with the NSGA-II genetic algorithm coupled with an in-house MATLAB tool. The input parameters were the size of engine, the hybridization degree and the specification of the battery (typology, nominal capacity, bus voltage, etc.). The outputs were electric endurance, additional volume, performance parameters and fuel consumption over a specified mission.

Electric endurance was below 30 min in the two test cases (unmanned aerial vehicles [UAVs]) but, thanks to the recharging of the batteries on-board, the total electric time was higher. Fuel consumption was very high for the largest UAV, while an improvement of 11 per cent with respect to a conventional configuration was obtained for the smallest one.

The research used a simplified approach for flight mechanics. Some components were not sized in the proposed test cases.

The results of the test cases stressed the importance of improving energy density and power density of the electric path.

The proposed methodology is aimed at minimizing the environmental impact of aircraft.

The proposed methodology was obtained from the automotive field with several original contributions to account for the aircraft application.

This paper aims to address the broad question of how organizations capture value from foresight exercises. Through a comparative case analysis, this paper looks at what firms do to make the information usable and create value. It explores factors that cause different firms to respond differently to the same trends. It analyzes the passenger car segment of the automobile industry and the response of six major firms to fossil fuel and changing environmental regulations through an analysis of their policies and strategic activities, such as new product development. It finds foresight to be an important link between firm capabilities and environmental changes.

This paper adopts the case approach to capture the linkage between the issue and the context (Yin, 1994) and uses multiple cases to explore the variables by comparing and contrasting the cases on key aspects (Eisenhardt and Graebner, 2007). As the paper ' s objective is to understand the similarities and differences between dominant firms in the sector, it chooses through theoretical sampling, six firms that have a presence in all the major regions of the world – two each from the USA, Europe and Japan – Ford, General Motors, Volkswagen, Renault, Toyota and Honda. This sample represents the firms and regions traditionally strong in the passenger car industry.

Thus, it is seen that the relationship that was posited in the conceptual model between the goal of the firms, the vision of the future and the nature of products and approach to technology/competence development seems to be valid. However, in addition, the paper perceives that some additional linkages that link between foresight and the goals and vision of the future seem to be influenced by the extent of uncertainty. In addition, the decisions regarding portfolio of products and approaches to technology and competence development seem to be also influenced by the perception of existing competencies and the external competitive context.

This paper was based on multiple cases created out of secondary information, hence the constructs used are those which are perceived and stated.

The paper could help firms understand decisions related to technology choices in field involving high levels of uncertainty and competition.

This paper could improve learning processes from foresight exercises, and enable strategic decisions to be taken on these.

Thus, this paper has explored the linkages between what firms perceive and state, and what is reflected in their actions. It has looked at this linkage from the perspective of foresight, and the strategic perspective of the firm. It has come up with additional issues and questions that influence this relationship. These can inform future research in this domain.

In recent years, increased awareness on global warming effects led to a renewed interest in all kinds of green technologies. Among them, some attention has been devoted to hybrid-electric aircraft – aircraft where the propulsion system contains power systems driven by electricity and power systems driven by hydrocarbon-based fuel. Examples of these systems include electric motors and gas turbines, respectively. Despite the fact that several research groups have tried to design such aircraft, in a way, it can actually save fuel with respect to conventional designs, the results hardly approach the required fuel savings to justify a new design. One possible path to improve these designs is to optimize the onboard energy management, in other words, when to use fuel and when to use stored electricity during a mission. The purpose of this paper is to address the topic of energy management applied to hybrid-electric aircraft, including its relevance for the conceptual design of aircraft and present a practical example of optimal energy management.

To address this problem the dynamic programming (DP) method for optimal control problems was used and, together with an aircraft performance model, an optimal energy management was obtained for a given aircraft flying a given trajectory.

The results show how the energy onboard a hybrid fuel-battery aircraft can be optimally managed during the mission. The optimal results were compared with non-optimal result, and small differences were found. A large sensitivity of the results to the battery charging efficiency was also found.

The novelty of this work comes from the application of DP for energy management to a variable weight system which includes energy recovery via a propeller.