Search results

IN this issue there is a Letter to the Editor (page 42). Its author is D. A. Barron, Chief Work Study Engineer of Marconi's Wireless Telegraph Co. Ltd., at Basildon. The letter is important from two aspects. Firstly, because it enables the writer of this column to clear up any misconceptions lingering in people's minds regarding references to Charles Bedaux in past editorials appearing in this journal.

The offshore supply vessel (OSV) industry is critical to offshore oil and gas operations around the world and contributes to the economic and ecological impacts experienced by the local communities supporting the offshore oil and gas industries. The OSV industry has not been studied significantly and the economic and ecological impacts to local communities is generally unknown. This paper aims to address these issues.

In this paper, the authors review the activities and logistical requirements involved in offshore exploration and development with special attention paid to workflows and the manner in which service vessels are utilized in the Gulf of Mexico. The authors estimate the OSV needs per stage of activity for offshore operations based on data collected from company planning documents, fleet utilization data from oil and gas companies and service providers, interviews and surveys. The statistical data is synthesized and reconciled and despite large variances the data sources are in reasonable agreement. Empirical data on circuit factors are also provided. The applications and limitations of the analyses are discussed.

In the US GOM, a large variety of marine vessels transport goods and provide services to exploration, development and production activity. OSVs provide a vital link between offshore E&P activities and shore‐based facilities. Offshore oil and gas operations cannot function without them and their utilization and spatial distribution provide a way of understanding the impacts of the offshore oil and gas industry on coastal communities.

This is the first empirical analysis of any offshore service vessel industry. The data presented here can be used to predict the environmental, economic, public health, and infrastructural consequences of alternative offshore development policies.

Annually, hundreds of drilling crew suffer from major injuries during performing oil and gas drilling operation because of the deficiency of an adequate hazard safety management system for real-time decision-making in hazardous conditions. According to previous studies, there is a sheer industrial need for an effective industrial safety management decision support system for accident prevention at oil and gas drilling sites at both drilling domains. Therefore, this paper aims to focus on the design and development of knowledge base decision support system (KBDSS) for the prevention of hazardous activities at Middle Eastern and South Asian origins’ onshore and offshore oil and gas industries during drilling operations.

In this study, data were gathered from safety and health professionals from targeted oil and gas industries in Malaysia, Saudi Arabia and Pakistan through quantitative and qualitative approaches. Based on identified data, KBDSSs (HAZFO Expert 1.0) were systematically developed and designed by adopting Database Development Life Cycle and Waterfall Software Development Life Cycle models. MySQL and Visual Studio 2015 software were used for developing and designing knowledge base and graphical user interface of the system.

KBDSS (HAZFO Expert 1.0) for accident prevention at onshore and offshore oil and gas drilling industries based on identified potential hazards and their suitable controlling measures aligned with international safety standards and regulations. HAZFO Expert 1.0 is a novel KBDSS that covers all onshore and offshore drilling operations with three and nine outputs, respectively, to achieve the current trend of Industry Revolution 4.0 and Industrial IoTs for workforce safety.

This industrial safety management system (HAZFO Expert 1.0) will be efficiently used for the identification and elimination of potential hazards associated with drilling activities at onshore and offshore drilling sites with an appropriate hazard controlling strategy.

Moreover, the developed KBDS system is unique in terms of its architecture and is dynamic in nature because it provides HAZFO Expert 1.0 data management and insertion application for authorized users. This is the first KBDSS which covers both drilling domains in Malaysian, Saudi Arabian and Pakistani industries.

Every year, hundreds of people have died and thousands have been injured because of insufficient management of well control at oil and gas drilling and production sites. Major causes which have been reported in previous studies included uncontrollable blowouts and failure of blowout preventers because of insufficient safety practices. These onshore and offshore blowout disasters not only harm the work force but also critically affect the environment and marine life. In this research paper, a detailed quantitative survey and qualitative risk assessments (RA) have been carried out for assessing the potentially hazardous activities associated with well control along with their appropriate controls and risk reduction factors and mitigating measures in Middle East and south East Asian countries.

The sequential explanatory research design has been adopted in this study. Whereas, descriptive statistical approach has been used for the quantitative data analysis of this study. While, in-depth interview approach has been used for qualitative data collection. Similarly, what-if analysis method has been adopted in this study for the identification of effective safety and health risk mitigating factors because it provides in-depth information from health and safety environment experts.

The cumulative quantitative results based on the response from Saudi Arabian drilling industry have indicated that the well control operation is highly hazardous then Malaysian and Pakistani oil and gas industries. Likewise, findings from what-if analysis approach demonstrate that the drilling crewmembers have repetitively faced life threatening hazards which occur (safety and chemical) during well control onshore and offshore operation because of oil base mud, confined space at site, pinch points and falling during working on blow out preventers. According to the overall result, respondents have highly recommended engineering and administrative hazard controlling factors as most suitable for the elimination of safety and chemical hazards during well control activities.

Besides, the developed methodological framework for the identification of suitable hazard controls can also be effectively used for potential hazards reorganization and identification of suitable hazard controls for other drilling and production industries and regions for accident prevention and safety and health management.

This is a first comparative research study which has been carried out in Malaysian, Saudi Arabian and Pakistani onshore and offshore oil and gas industries for well control health and safety management and reorganization of most effective hazards mitigating factors at drilling sites.

MORE cheering news about work study. In the Daily Express the following appeared: ‘Inflation has hit the State‐aided Remploy factories manned by wore than 6,000 disabled workers. But the workers of the 91 factories have wiped out—by increased efficiency—£124,000 of £271,000 rise in costs in the financial year up to the end of March.’

DRILLING, REAMING, COUNTERBORING, THREADBORING, ETC. THROUGHOUT the design of every machined part the designer should follow the practice of visualizing the machining involved, and make a genuine effort to design for “machinability” by avoiding all difficult operations. This factor cannot be over‐emphasized, as it is only too easy to complicate the machining of a part unnecessarily by lack of forethought during the design.

The purpose of this study is to define and develop a new technological development path for latecomer firms in developing countries.

An analytical framework for development based on the technological capability (TC) dimensions is developed and examined in the drilling sector. Since the process of TC accumulation is dynamic, the case study approach is the best method for an exploratory theory-building study. Through a comparative case study of two Iranian drilling contractors, a new path for the technological development of latecomer oil service companies is proposed.

The study of two cases indicates that despite having similar scope and levels of TC, one of them demonstrated superior technical performance. To address this difference, the concept of operational efficiency is introduced which is considered the outcome of increasing the depth of TC.

Although upgrading the level of technological and innovation capability is an important path for technological development, latecomers that suffer from various disadvantages can perform their routine activities with superior performance and develop through their basic operational/production capabilities. Also, specialized indicators designed for assessing the level and depth of TC in the drilling industry have important insights for evaluating the technological and competitive position of oil service companies.

To the best of the author’s knowledge, this study takes the first step in defining and elaborating on the concept of depth of TC as a development path for latecomers. It also introduced a novel approach to the global operational/production efficiency frontier as a target for their catch-up.

It is essential to level the drilling platform across which a drilling robot travels in a slant underground coal mine tunnel to ensure smooth operation of the drill rod. However, existing leveling methods do not provide dynamic performance under the drilling conditions of the underground coal mine. A four-point dynamic leveling algorithm is presented in this paper based on the platform attitude and support rod displacement (DLAAD). An experimental drilling robot demonstrates its dynamic leveling capability and ability to ensure smooth drill rod operations.

The attitude coordinate of the drilling robot is established according to its structure. A six-axis combined sensor is adopted to detect the platform attitude, thus revealing the three-axis Euler angles. The support rod displacement values are continuously detected by laser displacement sensors to obtain the displacement increment of each support rod as needed. The drilling robot is leveled according to the current support rod displacement and three-dimensional (3 D) attitude detected by the six-axis combined sensor dynamically.

Experimental results indicate that the DLAAD algorithm is correct and effectively levels the drilling platform dynamically. It can thus provide essential support in resolving drill rod sticking problems during actual underground coal mine drilling operations.

The DLAAD algorithm supports smooth drill rod operations in underground coal mines, which greatly enhances safety, reduces power consumption, and minimizes cost. The approach proposed here thus represents considerable benefits in terms of coal mine production and shows notable potential for application in similar fields.

The novel DLAAD algorithm and leveling control method are the key contributions of this work, they provide dynamical 3 D leveling and help to resolve drill rod sticking problems.

The robust appraisal of exploration drilling concepts is essential for establishing the economic viability of a prospective recovery field. This study evaluates the different concept selection methods that were considered for drilling operations at the Trym field in Norway. The construction of drilling rigs is a capital-intensive process, and it involves high levels of economic risk. These risks can be broadly categorised as aleatoric (i.e. those related to chance) and epistemic (i.e. those related to knowledge). Evaluating risks in the investment appraisal process tends to be a complicated process. Project risks are evaluated using Monte Carlo simulation (MCS) and are based on the fuzzy analytic hierarchy process (AHP). MCS provides a useful means of evaluating variabilities (i.e. aleatoric risks) in oil drilling operations. However, many of the economic risks in oil drilling processes are unanticipated, and, in some cases, are not readily expressible in quantitative values. The fuzzy AHP is therefore used to appraise the qualitatively defined indirect revenues comprising risks that affect future flexibilities, schedule certainty and health and safety performance. Both the Monte Carlo technique and the fuzzy AHP technique found that a cumulative revenue variation of up to 30% is possible in any of the considered drilling options. The fuzzy AHP technique estimates that the chances of profitability being less than NOK 1 billion over a five-year period is 0.5%, while the Monte Carlo technique estimates suggest a more conservative proportion of 10%. Overall, the fuzzy AHP technique is easy to use and flexible, and it demonstrates increased robustness and improved predictability.

Drilling is the first process step in creating a plated‐through hole (PTH). The purpose of the PTH is for electrically interconnecting two or more circuit locations and/or providing a means for electrical and mechanical connection of components to the MLCB.