Search results

To investigate the relation of in‐plane fabric tensile properties with woven fabrics bagging behavior, a new test method was developed and a real time data acquisition and strain gauge technique were used. The bagging procedure was carried out while the woven fabric tensile deformations along warp and weft directions were measured. The fabric bagging behavior was characterized by bagging resistance, bagging fatigue, residual bagging height and residual bagging hysteresis. The experimental results show that the bagging load, work, hysteresis, residual hysteresis and fatigue are highly linearly correlated with corresponding parameters in warp and weft directions. An empirical relationship obtained between residual bagging height and bagging fatigue and resistance (R²=0.83) suggests that the proposed new test method is able to evaluate bagging behavior of fabrics.

Bagging (bootstrap aggregating) is a smoothing method to improve predictive ability under the presence of parameter estimation uncertainty and model uncertainty. In Lee and Yang (2006), we examined how (equal-weighted and BMA-weighted) bagging works for one-step-ahead binary prediction with an asymmetric cost function for time series, where we considered simple cases with particular choices of a linlin tick loss function and an algorithm to estimate a linear quantile regression model. In the present chapter, we examine how bagging predictors work with different aggregating (averaging) schemes, for multi-step forecast horizons, with a general class of tick loss functions, with different estimation algorithms, for nonlinear quantile regression models, and for different data frequencies. Bagging quantile predictors are constructed via (weighted) averaging over predictors trained on bootstrapped training samples, and bagging binary predictors are conducted via (majority) voting on predictors trained on the bootstrapped training samples. We find that median bagging and trimmed-mean bagging can alleviate the problem of extreme predictors from bootstrap samples and have better performance than equally weighted bagging predictors; that bagging works better at longer forecast horizons; that bagging works well with highly nonlinear quantile regression models (e.g., artificial neural network), and with general tick loss functions. We also find that the performance of bagging may be affected by using different quantile estimation algorithms (in small samples, even if the estimation is consistent) and by using different frequencies of time series data.

Customer churn prediction is one of the most well-known approaches to manage and improve customer retention. Machine learning techniques, especially classification algorithms, are very popular tools to predict the churners. In this paper, three ensemble classifiers are proposed based on bagging and boosting for customer churn prediction.

In this paper, three ensemble classifiers are proposed based on bagging and boosting for customer churn prediction. The first classifier, which is called boosted bagging, uses boosting for each bagging sample. In this approach, before concluding the final results in a bagging algorithm, the authors try to improve the prediction by applying a boosting algorithm for each bootstrap sample. The second proposed ensemble classifier, which is called bagged bagging, combines bagging with itself. In the other words, the authors apply bagging for each sample of bagging algorithm. Finally, the third approach uses bagging of neural network with learning based on a genetic algorithm.

To examine the performance of all proposed ensemble classifiers, they are applied to two datasets. Numerical simulations illustrate that the proposed hybrid approaches outperform the simple bagging and boosting algorithms as well as base classifiers. Especially, bagged bagging provides high accuracy and precision results.

In this paper, three novel ensemble classifiers are proposed based on bagging and boosting for customer churn prediction. Not only the proposed approaches can be applied for customer churn prediction but also can be used for any other binary classification algorithms.

The purpose of this paper is to predict the appearance of denim fabric after repetitive uses judging the denim cloth behavior and performance in viewpoint of bagging ability. Hence, it attempts to carry out the significant inputs and outputs that have an influence on the bagging behaviors using the Principal Component Analysis (PCA) technique. In this study, the Kawabata Evaluation System parameters such as the frictional characteristics, the bending, compression, tensile and shear parameters are investigated to propose a model highlighting and explaining their impacts on the different bagging properties. To improve the obtained results, the selected significant inputs are also analyzed within their bagging properties using Taguchi experimental design. The linear regressive models prove the effectiveness of the PCA method and the obtained findings.

To investigate the mechanical properties and their contributions on the bagging characteristics, some denim fabrics were collected and measured thanks to the Kawabata evaluation systems (KES-FB1, KES-FB2, KES-FB3 and KES-FB4). These bagging properties were further analyzed applying the method of PCA to acquire factor patterns that indicate the most important fabric properties for characterizing the bagging behaviors of different studied denim fabric samples. An experimental design type Taguchi was, hence, applied to improve the results. Regarding the obtained results, it may be concluded that the PCA method remained a powerful and flawless technique to select the main influential inputs and significant outputs, able to define objectively the bagging phenomenon and which should be considered from the next researches.

According to the results, there are good relationships between the Kawabata input parameters and the analyzed bagging properties of studied denim fabrics. Indeed, thanks to the PCA, it is probably easy to reduce the number of the influent parameters for three reasons. First, applying this technique of selection can help to select objectively the most influential inputs which affect enormously the bagged fabrics. Second, knowing these significant parameters, the prediction of denim fabric bagging seems fruitful and can undoubtedly help researchers explain widely this complex phenomenon. Third, regarding the findings mentioned, it seems that the prevention of this aesthetic phenomenon appearing in some specific zones of denim fabrics will be more and more accurate.

This study is interesting for denim consumers and industrial applications during long and repetitive uses. Undoubtedly, the denim garments remained the largely used and consumed, hence, this particularity proves the necessity to study it in order to evaluate the bagging phenomenon which occurs as function of number of uses. Although it is fashionable to have bagging, the denim fabric remains, in contrast with the worsted ones, the most popular fabric to produce garments. Moreover, regarding this characteristic, the large uses and the acceptable value of denim fabrics, their aesthetic appearance behavior due to bagging phenomenon can be analyzed accurately because compared to worsted fabrics, they have a high value and the repetitive tests to investigate widely bagged zones may fall the industrial. The paper has practical implications in the clothing appearance and other textile industry, especially in the weaving process when friction forms (yarn-to-yarn, yarn-to-metal frictions) and stresses are drastic. This can help understanding why residual bagging behavior remained after garment uses due to the internal stress and excessive extensions. Regarding the selected influential inputs and outputs relative to bagging behaviors, there are some practical implications that have an impact on the industrial and researchers to study objectively the occurrence of this aesthetic phenomenon. Indeed, this study discusses the significance of the overall inputs; their contributions on the denim fabric bagged zones aims to prevent their ability to appear after uses. Moreover, the results obtained regarding the fabric mechanical properties can be useful to fabric and garment producers, designers and consumers in specifying and categorizing denim fabric products, insuring more denim cloth use and controlling fabric value. For applications where the subjective view of the consumer is of primary importance, the KES-FB system yields data that can be used for evaluating fabric properties objectively and prejudge the consumer satisfaction in viewpoint of the bagging ability. Therefore, this study shows that by measuring shear, tensile and frictional parameters of KES-FB, it may be possible to evaluate bagging properties. However, it highlights the importance and the significance of some inputs considered influential or the contrast (non-significant) in other researches.

This work presents the first study analyzing the bagged denim fabric applying the PCA technique to remove the all input parameters which are not significant. Besides, it deals with the relationship developed between the mechanical fabric properties (tensile, shear and frictional stresses) and the bagging properties behavior. To improve these obtained relationships, for the first time, the regression technique and experimental design type Taguchi analysis were both applied. Moreover, it is notable to mention that the originality of this study is to let researchers and industrials investigate the most influential inputs only which have a bearing on the bagging phenomenon.

The purpose of this paper is to optimize the frictional input parameters related to the yarn and woven fabric samples. Indeed, using metaheuristic techniques for optimization, it helps to attempt the best quality appearance of garment, by analysing their effects and relationships with the bagging behaviour of tested fabrics before and after bagging test. Using metaheuristic techniques allows us to select widely the minimal residual bagging properties and the optimized inputs to adjust them for this goal.

The metaheuristic methods were applied and discussed. Hence, the genetic algorithms (GA) and ant colony optimization (ACO) technique results are compared to select the best residual bagging behaviour and their correspondent parameters. The statistical analysis steps were implemented using Taguchi experimental design thanks to Minitab 14 software. The modelling methodology analysed in this paper deals with the linear regression method application and analysis to prepare to the optimization steps.

The regression results are essential for evaluate the effectiveness of the relationships founded between inputs and outputs parameters and for their optimizations in the design of interest.

This study is interesting for denim consumers and industrial applications during long and repetitive uses. Undoubtedly, the denim garments remained the largely used and consumed, hence, this particularity proves the necessity to study it in order to optimize the bagging phenomenon which occurs as function of number of uses. Although it is fashionable to have bagging, the denim fabric remains, in contrast with the worsted ones, the most popular fabric to produce garments. Moreover, regarding this characteristic, the large uses and the acceptable value of denim fabrics, their aesthetic appearance behaviour due to bagging phenomenon can be analysed and optimized accurately because compared to worsted fabrics, they have a high value and the repetitive tests to investigate widely bagged zones can fall the industrial. The paper has practical implications in the clothing appearance and other textile industry, especially in the weaving process when friction forms (yarn-to-yarn, yarn-to-metal frictions) and stresses are drastic. This can help to understand why residual bagging behaviour remained after garment uses due to the internal stress and excessive extensions.

Until now, there is no work dealing with the optimization of bagging behaviour using metaheuristic techniques. Indeed, all investigations are focused on the evaluation and theoretical modelling based on the multi linear regression analysis. It is notable that the metaheuristic techniques such as ACO and GA are used to optimize some difficult problems but not yet in the textile field excepting some studies using the GA. Besides, there is no sufficiently information to evaluate, predict and optimize the effect of the yarn-to-yarn friction as well as metal-to-yarn one on the residual bagging behaviour. Several and different denim fabrics within their different characteristics are investigated to widen the experimental analysis and thus to generalize the results in the experimental design of interest.

The purpose of this paper is to predict the bagging recovery velocity of bagged denim fabric samples. Hence, the authors attempt to carry out a model highlighting and explaining the impact of some considered frictional parameters such as yarn-to-yarn friction expressed as weft yarn rigidity parameter and metal-to-fabric friction expressed by mean frictional coefficient parameter.

The statistical analysis steps were implemented using experimental design type Taguchi and thanks to Minitab 14 software. The modeling methodology analyzed in this paper deals with the linear regression method application and analysis. The predictive power of the obtained model is evaluated by comparing the estimated recovery velocity (theoretical) with the actual values. These comparative values are measured after the bagging test and during the relaxation time of the denim fabric samples. The regression coefficient (R2) values as well as the statistical tests (p-values, analysis of variance results) were investigated, discussed and analyzed to improve the findings.

According to the statistical results given by Taguchi analysis findings, the regression model is very significant (p-regression=0.04 and R2=97 percent) which explains widely the possibility of bagging behavior prediction in the studied experimental field of interest. Indeed the variation (the increase or the decrease) of the frictional input parameters values caused, as a result, the variation of the whole appearance and the shape of the bagged zone expressed by the residual bagging height variations. In spite of their similar compositions and characteristics, the woven bagged fabrics presented differently behaviors in terms of the bagging recovery and kinetic velocity values. After relaxation times which are not the same and relative to different fabric samples, it may be concluded that bagging behavior remained function of the internal frictional stresses, especially yarn-to-yarn and metal-to-fabric ones.

This study is interesting for denim consumers and industrial applications during long and repetitive uses. The paper has practical implications in the clothing appearance and other textile industry, especially in the weaving process when friction forms (yarn-to-yarn, yarn-to-metal frictions) and stresses are drastic. In fact, in terms of the importance to the industrial producers of the materials it helps to provide a first step in an attempt for a better understanding of the stresses involved in bagging of woven fabrics in general and denim fabrics particularly due to important frictional input contributions. They provide the basis for the development of fabrics that can withstand bagging problems. This research may also put forward improved methods of measuring bagginess as function of frictional parameters in order to optimize (minimize) their effects on the bagging behaviors before and after repetitive uses. These experimental, statistical and theoretical findings may be used to predict bagginess of fabrics based on their properties and prevent industrial from the most significant and influential inputs which should be adjusted accurately. This work allows industrial, also, to make more attention, in case of a high-quality level to ensure, to optimize and review yarn behaviors used to produce fabrics against drastic solicitations and minimize frictions forms during experimental spinning and weaving processes.

Until now, there is no sufficient information to evaluate and predict the effect of the yarn-to-yarn friction as well as metal-to-yarn one on the residual bagging behavior. Besides, there is no work that deals with the kinetic recovery evolution as function of frictional inputs to explain accurately the bagging behavior evolution during relaxation time. Therefore, this present work is to investigate and model the residual bagging recovery velocity after bagging test as function of the frictional input parameters of both denim yarn and fabric samples (expressed by the friction caused due to contact from conformator to fabric).

Garment bagging is considered as a 3D distortion happened over cyclic movement and/or prolonged stretching of fabric materials. In this study, a laser scanning system was proposed for a 3D measurement of garment bagging and the advantages of this technique over conventional methods were revealed. A surface inspection method for garment bagging was developed; simple boundary filter, pick peaks tool, 5 point FFT smoothing and polynomial fit were applied to detect and measure the borderline of bagging deformation conditions. The 3D information of bagging shape, including bagging height, could be obtained through this technique.

This work deals with the evolution of the residual bagging height of knitted samples. In comparing the results after a fabric bagging test, it may be concluded that the behaviour of the sample length is an influential parameter which widely reflects the anisotropy of knitted structures. Hence, it is clear that the sample length does not exhibit the same behaviour in each knitted fabric zone which generally explains the impartial response after stress is applied. With regards to the different height values that the sample length presents in each measured part of the fabric, it may be concluded that there are several types of behaviours in the areas of bagging along the sample length. Moreover, it appears that there is a non uniform distribution of deformation after removing the stress. Therefore, internal stresses and deformations that cause different residual heights in the same sample accurately reflect and explain the anisotropic structure of the investigated knitted fabrics. In knowing that there is this non-uniform distribution of deformation, the input parameters also have considerable effects on the bending behaviour of the residual bagging. Indeed, when the yarn structure is changed, the residual bagging height changes too. Furthermore, our findings prove that elastic knitted fabrics accurately show a more minimal residual bagging height as opposed to non elastic fabrics in spite of the other input parameter values.

The primary objective of this study was to recognize critical indicators in predicting blood glucose (BG) through data-driven methods and to compare the prediction performance of four tree-based ensemble models, i.e. bagging with tree regressors (bagging-decision tree [Bagging-DT]), AdaBoost with tree regressors (Adaboost-DT), random forest (RF) and gradient boosting decision tree (GBDT).

This study proposed a majority voting feature selection method by combining lasso regression with the Akaike information criterion (AIC) (LR-AIC), lasso regression with the Bayesian information criterion (BIC) (LR-BIC) and RF to select indicators with excellent predictive performance from initial 38 indicators in 5,642 samples. The selected features were deployed to build the tree-based ensemble models. The 10-fold cross-validation (CV) method was used to evaluate the performance of each ensemble model.

The results of feature selection indicated that age, corpuscular hemoglobin concentration (CHC), red blood cell volume distribution width (RBCVDW), red blood cell volume and leucocyte count are five most important clinical/physical indicators in BG prediction. Furthermore, this study also found that the GBDT ensemble model combined with the proposed majority voting feature selection method is better than other three models with respect to prediction performance and stability.

This study proposed a novel BG prediction framework for better predictive analytics in health care.

This study incorporated medical background and machine learning technology to reduce diabetes morbidity and formulate precise medical schemes.

The majority voting feature selection method combined with the GBDT ensemble model provides an effective decision-making tool for predicting BG and detecting diabetes risk in advance.