Search results

The purpose of this paper is to use the corresponding magnetic sensor and detection method to detect and image the defects of small diameter pipelines. Urban gas pipeline is an energy transportation tool for urban industrial production and social life, which is closely related to urban safety. Preventing the occurrence of urban gas pipeline transportation accidents and carrying out pipeline defect detection are of great significance for the urban economic and social stability. To perform pipeline defect detection, the magnetic flux leakage internal detection method is generally used in the detection of large-diameter long-distance oil and gas pipelines. However, in terms of the internal detection of small-diameter pipelines, due to the heavy weight, large structure of the detection device and small pipe diameter, the detection is more difficult.

In order to solve the above matters, self-made three-dimensional magnetic sensor and three-dimensional magnetic flux leakage imaging direct method are proposed for studying the defect identification. Firstly, for adapting to the diameter range of small-diameter pipelines, and containing the complete information of the defect, a self-made three-dimensional magnetic sensor is made in this paper to improve the accuracy of magnetic flux leakage detection. And on the basis of it, a small diameter pipeline defect detection system is built. Secondly, as detection signal may be affected by background magnetic field interference and the jitter interference, the complete ensemble empirical mode decomposition with adaptive noise method is utilized to screen the detected signal. As a result, the useful signal is reconstructed and the interference signal is removed. Finally, the defect contour inversion imaging of detection is realized based on the direct method of three-dimensional magnetic flux leakage imaging, which includes three-dimensional magnetic flux leakage detection data and data segmentation recognition.

The three-dimensional magnetic flux leakage imaging experimental results shown that, compared to the actual defects, the typical defects, irregular defects and crack groove defects can be analyzed by the magnetic flux leakage defect contour imaging method in qualitative and quantitative way respectively, which provides a new idea for the research of defect recognition.

A three-dimensional magnetic sensor is made to adapt the diameter range of small diameter pipeline, and based on it, a small-diameter pipeline defect detection system is built to collect and display the magnetic flux leakage signal.

The purpose of this paper is to examine the impact of social movements engendered by the Arab Spring crisis on the relationship between corporate social responsibility disclosure (CSRD) and corporate governance attributes, particularly board composition, considering the importance of governance after the Arab Spring event.

Content analysis was used to examine the extent and nature of CSRD in annual reports of Jordanian companies listed on the Amman Stock Exchange covering the period 2009–2016. A dynamic regression model using panel data is then undertaken for a sample of 114 listed companies over the period to analyse the potential impact of board composition on the level of CSRD.

The results reveal that there was a significant increase in the level of CSRD post-the Arab Spring crisis; and that governance appears to be a key driver. Specifically, board age, directors educated in business and/or accounting-related fields and foreign members are found to have a significant positive relationship with CSRD.

Looking at the Arab region pre- and after the Arab Spring helps to complete the global picture of how company governance can lead to improved CSR performance. Specifically, this region has been behind in developing rules and codes that include CSR. The results show that having a diverse board, with directors with expertise specific to the context, increases the effectiveness of stakeholder management through CSRD. The results, therefore, offer valuable insights for companies, policymakers and for the development of regulations.

This study aims to practically determine the optimum proportion of aggregates to attain the desired strength of geopolymer concrete (GPC) and then compare the results using established analytical particle packing methods. The investigation further aims to assess the influence of various amounts of recycled aggregate (RA) on properties of low-calcium fly ash-based GPC of grade M25.

Fine and coarse aggregates were blended in various proportions and the proportion yielding maximum packing density was selected as the optimum proportion and they were compared with analytical models, such as Modified Toufar Model (MTM) and J. D. Dewar Model. RAs for this study were produced in laboratory and they were used in various amounts, namely, 0%, 50% and 100%. 12M NaOH solution was mixed with Na₂SiO₃ in the ratio of 1:2. The curing of concrete was done at the temperatures of 60° and 90 °C for 24, 48 and 72h.

The experimentally obtained optimum proportion of coarse to fine aggregate was 60:40 for all amounts of RA. Meanwhile, MTM and Dewar Model resulted in coarse aggregate to fine aggregates as 40:60, 45:55, 55:45 and 55:45, 35:65, 60:40, respectively, for 0% 100% and 50% RAs. The compressive strength of GPC elevated with the increase in curing regime. In addition, the ultrasonic pulse velocity also displayed a similar trend as that of strength.

The GPC with 50% RAs may be considered for use, as it exhibited superior properties compared to GPC with 100% RAs and was comparable to GPC with natural aggregates. Furthermore, compressive strength is correlated with split tensile strength and ultrasonic pulse velocity.

This paper aims to investigate the influence of “BroncoCut-X” (copper core-ZnCu50 coating) electrode on the machining of Ti-3Al-2.5V in view of its extensive use in aerospace and medical applications. The machining parameters are selected as Spark-off Time (ST_off), Spark-on Time (ST_on), Wire-speed (S_w), Wire-Tension (WT) and Servo-Voltage (S_v) to explore the machining outcomes. The response characteristics are measured in terms of material removal rate (MRR), average kerf width (KW) and average-surface roughness (SA).

Taguchi’s approach is used to design the experiment. The “AC Progress V2 high precision CNC-WEDM” is used to conduct the experiments with ϕ 0.25 mm diameter wire electrode. The machining performance characteristics are examined using main effect plots and analysis of variance. The grey-relation analysis and fuzzy interference system techniques have been developed to combine (called grey-fuzzy reasoning grade) the experimental response while Rao-Algorithm is used to calculate the optimal performance.

The hybrid optimization result is obtained as ST_off = 50µs, ST_on = 105µs, S_w = 7 m/min, WT = 12N and S_v=20V. Additionally, the result is compared with the firefly algorithm and improved gray-wolf optimizer to check the efficacy of the intended approach. The confirmatory test has been further conducted to verify optimization results and recorded 8.14% overall machinability enhancement. Moreover, the scanning electron microscopy analysis further demonstrated effectiveness in the WEDMed surface with a maximum 4.32 µm recast layer.

The adopted methodology helped to attain the highest machinability level. To the best of the authors’ knowledge, this work is the first investigation within the considered parametric range and adopted optimization technique for Ti-3Al-2.5V using the wire-electro discharge machining.

The purpose of this study is to investigate the Dynamics of micropolar – water B Fluids flow simultaneously under the influence of thermal radiation and Soret–Dufour Mechanisms.

The thermal radiation contribution, the chemical change and heat generation take fluidity into account. The flow equations are used to produce a series of dimensionless equations with appropriate nondimensional quantities. By using the spectral homotopy analysis method (SHAM), simplified dimensionless equations have been quantitatively solved. With Chebyshev pseudospectral technique, SHAM integrates the approach of the well-known method of homotopical analysis to the set of altered equations. In terms of velocity, concentration and temperature profiles, the impacts of Prandtl number, chemical reaction and thermal radiation are studied. All findings are visually shown and all physical values are calculated and tabulated.

The results indicate that an increase in the variable viscosity leads to speed and temperature increases. Based on the transport nature of micropolar Walters B fluids, the thermal conductivity has great impact on the Prandtl number and decrease the velocity and temperature. The current research was very well supported by prior literature works. The results in this paper are anticipated to be helpful for biotechnology, food processing and boiling. It is used primarily in refrigerating systems, tensile heating to large-scale heating and oil pipeline reduction.

All results are presented graphically and all physical quantities are computed and tabulated.

The purpose of this paper is to investigate the effect of the replacement of natural coarse aggregate (NCA) with different percentages of recycled coarse aggregate (RCA) on properties of low calcium fly ash (FA)-based geopolymer concrete (GPC) cured at oven temperature. Further, this paper aims to study the effect of partial replacement of FA by ground granulated blast slag (GGBS) in GPC made with both NCA and RCA cured under ambient temperature curing.

M25 grade of ordinary Portland cement (OPC) concrete was designed according to IS: 10262-2019 with 100% NCA as control concrete. Since no standard guidelines are available in the literature for GPC, the same mix proportion was adopted for the GPC by replacing the OPC with 100% FA and W/C ratio by alkalinity/binder ratio. All FA-based GPC mixes were prepared with 12 M of sodium hydroxide (NaOH) and an alkalinity ratio, i.e. sodium hydroxide to sodium silicate (NaOH:Na₂SiO₃) of 1:1.5, subjected to 90^°C temperature for 48 h of curing. The NCA were replaced with 50% and 100% RCA in both OPC and GPC mixes. Further, FA was partially replaced with 15% GGBS in GPC made with the above percentages of NCA and RCA, and they were given ambient temperature curing with the same molarity of NaOH and alkalinity ratio.

The workability, compressive strength, split tensile strength, flexural strength, water absorption, density, volume of voids and rebound hammer value of all the mixes were studied. Further, the relationship between compressive strength and other mechanical properties of GPC mixes were established and compared with the well-established relationships available for conventional concrete. From the experimental results, it is found that the compressive strength of GPC under ambient curing condition at 28 days with 100% NCA, 50% RCA and 100% RCA were, respectively, 14.8%, 12.85% and 17.76% higher than those of OPC concrete. Further, it is found that 85% FA and 15% GGBS-based GPC with RCA under ambient curing shown superior performance than OPC concrete and FA-based GPC cured under oven curing.

The scope of the present paper is limited to replace the FA by 15% GGBS. Further, only 50% and 100% RCA are used in place of natural aggregate. However, in future study, the replacement of FA by different amounts of GGBS (20%, 25%, 30% and 35%) may be tried to decide the optimum utilisation of GGBS so that the applications of GPC can be widely used in cast in situ applications, i.e. under ambient curing condition. Further, in the present study, the natural aggregate is replaced with only 50% and 100% RCA in GPC. However, further investigations may be carried out by considering different percentages between 50 and 100 with the optimum compositions of FA and GGBS to enhance the use of RCA in GPC applications. The present study is further limited to only the mechanical properties and a few other properties of GPC. For wider use of GPC under ambient curing conditions, the structural performance of GPC needs to be understood. Therefore, the structural performance of GPC subjected to different loadings under ambient curing with RCA to be investigated in future study.

The replacement percentage of natural aggregate by RCA may be further enhanced to 50% in GPC under ambient curing condition without compromising on the mechanical properties of concrete. This may be a good alternative for OPC and natural aggregate to reduce pollution and leads sustainability in the construction.

This study aims to establish a reliable index to identify interdisciplinary breakthrough innovation effectively. We constructed a new index, the D_Div index, for this purpose.

The D_Div index incorporates the degree of interdisciplinarity in the breakthrough index. To validate the index, a data set combining the publication records and citations of Nobel Prize laureates was divided into experimental and control groups. The validation methods included sensitivity analysis, correlation analysis and effectiveness analysis.

The sensitivity analysis demonstrated the D_Div index’s ability to differentiate interdisciplinary breakthrough papers from various categories of papers. This index not only retains the strengths of the existing index in identifying breakthrough innovation but also captures interdisciplinary characteristics. The correlation analysis revealed a significant correlation (correlation coefficient = 0.555) between the interdisciplinary attributes of scientific research and the occurrence of breakthrough innovation. The effectiveness analysis showed that the D_Div index reached the highest prediction accuracy of 0.8. Furthermore, the D_Div index outperforms the traditional DI index in terms of accuracy when it comes to identifying interdisciplinary breakthrough innovation.

This study proposed a practical and effective index that combines interdisciplinary and disruptive dimensions for detecting interdisciplinary breakthrough innovation. The identification and measurement of interdisciplinary breakthrough innovation play a crucial role in facilitating the integration of multidisciplinary knowledge, thereby accelerating the scientific breakthrough process.

Sustainable strategic management (SSM) is an integrated concept that entails sustainability in the approaches and processes of strategic management. Banking being a rapidly growing industry in service sector, it is reasonably important to study the SSM and its integrated performance. This paper aims to study the sustainable-strategic (SS) factors of Indian banks that affects their endurance and prioritizes the banks based on their sustainable and strategic performance.

This study appertains a sustainable balanced scorecard (SBSC) framework to determine the SS factors and an integrated multicriteria decision making (MCDM) method to weigh the criteria and prioritize the banks' performance.

The criterion weightage signifies sustainability, followed by financial and internal business perspective to be a crucial dimension for the performance of banks. The banks, State Bank of India, HDFC Bank Ltd and Canara Bank are ranked top-most on the SS performance.

The insights from the study on SS factors and banks' performance can be further used by policy-makers and researchers to understand the sustainability assessing factors and focus on making policies and further studies to enhance the performance in this regard.

Banking is one of the potentially growing industry in service sector. It being a major part of economy's sustainable growth, it is essential to assess the SS factors that enhance their sustainable performance. There is dearth of study in this purview, for developing countries like India. Thus, this study critically analyses the strategic sustainability of Indian banking industry to ascertain the SS factors and prioritize the performance of banks based on criterion weightage and bank's SS operations.

This study aims to investigate the optimal process parameters of the wire-cut electrical discharge machining (WCEDM) for the machining of the GZR-AA7475 hybrid metal matrix composite (HMMC). HMMCs are prepared with 2 Wt.% graphite and 4 Wt.% zirconium dioxide reinforced with aluminium alloy 7475 (GZR-AA7475) composite by using the stir casting method. The objective is to enhance the mechanical properties of the material while preserving its unique features. WCEDM with a 0.18 mm molybdenum wire electrode is used for machining the composite.

To conduct experimental studies, a Taguchi L27 orthogonal array was adopted. Input variables such as peak current (I_p), pulse-on-time (T_ON) and flushing pressure (P_F) were used. The effect of process parameters on the output responses, such as material removal rate (MRR), surface roughness rate (SRR) and wire wear ratio (WWR), were investigated. The grey relational analysis (GRA) is used to obtain the optimal combination of the process parameters. Analysis of variance (ANOVA) was also used to identify the significant process parameters affecting the output responses.

Results from the current study concluded that the optimal condition for grey relational grade is obtained at T_ON = 105 µs, I_p = 100 A and P_F = 90 kg/cm². Peak current is the most prominent parameter influencing the MRR, whereas SRR and WRR are highly influenced by flushing pressure.

Identifying the optimal process parameters in WCEDM for machining of GZR-AA7475 HMMC. ANOVA and GRA are used to obtain the optimal combination of the process parameters.

The study explores the factors affecting the use of smart human resource management 4.0 (SHRM 4.0) practices and its effect on dynamic capabilities and, consequently, on organizational performance.

The authors used socio-technical and dynamic capabilities theory to propose the notable research model. The authors explored the factors driving the use of SHRM 4.0 practices and their contribution to organizational performance through the development of dynamic capabilities. The authors collected data from 383 senior HR managers using a structured questionnaire, and PLS-SEM was used to analyze the data.

The results show that socio-technical factors such as top management support, HR readiness, competitive pressure, technology readiness and perceived usefulness influence the use of SHRM 4.0 practices, whereas security and privacy concerns negatively influence them. Furthermore, the authors also found the use of SHRM 4.0 practices influencing the dynamic capacities (build (learning), integration and reconfiguration) and, subsequently, its impact on organizational performance.

Its novelty lies in developing a model using dynamic capabilities and socio-technical theory to explore how SHRM 4.0 practices influence organizational performance through dynamic capabilities. This study extends the literature on SHRM 4.0 practices, HR technology use, HR and dynamic capabilities by contributing to socio-technical theory and dynamic capabilities and expanding the scope of these theories in the area of HRM. It provides crucial insights into HR and top managers to benchmark SHRM 4.0 practices for improved organizational performance.