Search results

Cotton fibre lots are graded and selected for yarn spinning based on their quality value which is a function of certain fibre properties. Cotton grading and selection has created a domain of emerging interest among the researchers. Several researchers have addressed the said issue using a few exponents of multi-criteria decision-making (MCDM) technique. The purpose of this study is to demonstrate a cotton selection problem using a recently developed measurement of alternatives and ranking according to compromise solution (MARCOS) method which can handle almost any decision problem involving a finite number of alternatives and multiple conflicting decision criteria.

The MARCOS method of the MCDM technique was deployed in this study to rank 17 cotton fibre lots based on their quality values. Six apposite fibre properties, namely, fibre bundle strength, elongation, fineness, upper half mean length, uniformity index and short fibre content are considered as the six decision criteria assigning weights previously determined by an earlier researcher using analytic hierarchy process.

Among the 17 alternatives, C9 secured rank 1 (the best lot) with the highest utility function (0.704) and C7 occupied rank 17 (the worst lot) with the lowest utility function (0.596). Ranking given by MARCOS method showed high degree of congruence with the earlier approaches, as evidenced by high rank correlation coefficients (Rs > 0.814). During sensitivity analyses, no occurrence of rank reversal is observed. The correlations between the quality value-based ranking and the yarn tenacity-based rankings are better than many of the traditional methods. The results can be improved further by adopting other efficient method of weighting the criteria.

The properties of raw cotton have significant impact on the quality of final yarn. Compared to the traditional methods, MCDM is reported as the most viable solution in which fibre parameters are given their due importance while formulating a single index known as quality value. The present study demonstrates the application of a recently developed exponent of MCDM in the name of MARCOS for the first time to address a cotton fibre selection problem for textile spinning mills. The same approach can also be extended to solve other decision problems of the textile industry, in general.

Novelty of the present study lies in the fact that the MARCOS is a very recently developed MCDM method, and this is a maiden application of the MARCOS method in the domain of textile, in general, and cotton industry, in particular. The approach is very simple, highly effective and quite flexible in terms of number of alternatives and decision criteria, although highly robust and stable.

This study aims to examine decision factors for global sourcing, differentiated into transcontinental and continental sourcing to obtain insight into locational aspects of sourcing decisions and global trends. This study analyzed various country perceptions to reveal their influence on sourcing decisions. The country of origin (COO) theory explains why certain country perceptions and images influence purchasing experts in their selection of suppliers.

This study used a two-study approach. In Study 1, the authors conducted discrete choice card experiments with 71 purchasing experts located in Europe and the USA to examine the importance of essential decision factors for global sourcing. Given the clear evidence that location is a factor in sourcing decisions, in Study 2 the authors investigated purchasers’ perceptions and images of countries, adding country ranking experiments on various perceived characteristics such as quality, price and technology.

Study 1 provides evidence that the purchasers’ personal relationship with the supplier plays a decisive role in the supplier selection process. While product quality and location impact sourcing decisions, the attraction of the buying company and cultural barriers are less significant. Interestingly, however, these factors seem as important as price to respondents. This implies that a strong relationship with suppliers and good quality products are essential aspects of a reliable and robust supply chain in the post-COVID-19 era. Examining the locational aspect in detail, Study 2 linked the choice card experiments with country ranking experiments. In this study, the authors found that purchasing experts consider that transcontinental countries such as Japan and China offer significant advantages in terms of price and technology. China has enhanced its quality, which is recognizable in the country ranking experiments. Therefore, decisions on global sourcing are not just based on such high-impact factors as price and availability; country perceptions are also influential. Additionally, the significance of the locational aspect could be linked to certain country images of transcontinental suppliers, as the COO theory describes.

The new approach divides global sourcing into transcontinental and European sourcing to evaluate special decision factors and link these factors to the locational aspect of sourcing decisions. To deepen the clear evidence for the locational aspect and investigate the possible influence of country perceptions, the authors applied the COO theory. This approach enabled authors to show the strong influence of country perception on purchasing departments, which is represented by the locational effect. Hence, the success of transcontinental countries relies not only on factors such as their availability but also on the purchasers’ positive perceptions of these countries in terms of technology and price.

Amid rapid technological progress, the construction industry is embracing Construction 4.0, redefining work practices through emerging technologies. However, the implications of Construction 4.0 technologies to enhancing well-being are still poorly understood. Particularly, the challenge lies in selecting technologies that critically contribute to well-being enhancement. Therefore, this study aims to evaluate the implications of Construction 4.0 technologies to enhancing well-being.

A list of Construction 4.0 technologies was identified from a national strategic plan on Construction 4.0, using Malaysia as a case study. Fourteen construction industry experts were selected to evaluate the implications of Construction 4.0 technologies on well-being using fuzzy Technique for Order Preference by Similarity to Ideal Solution (TOPSIS). The expert judgment was measured using linguistic variables that were transformed into fuzzy values. Then, the collected data was analyzed using the following analyses: fuzzy TOPSIS, Pareto, normalization, sensitivity, ranking performance and correlation.

Six Construction 4.0 technologies are critical to enhancing well-being: cloud & real-time collaboration, big data & predictive analytics, Internet of Things, building information modeling, autonomous construction and augmented reality & virtualization. In addition, artificial intelligence and advanced building materials are recommended to be implemented simultaneously as a very strong correlation exists between them.

The novelty of this study lies in a comprehensive understanding of the implications of Construction 4.0 technologies to enhancing well-being. The findings can assist researchers, industry practitioners and policymakers in making well-informed decisions to select Construction 4.0 technologies when targeting the enhancement of the overall well-being of the local construction industry.

The case examines the development and launch of an exchange-traded fund (ETF) based on JUST Capital's socially responsible corporate ranking methodologies. The case provides a market overview of Environment, Social, and Corporate Governance (ESG) and socially responsible investing (SRI), what has driven growth in those areas worldwide, and several best-practice investment approaches. Following the overview, the case describes the founding and development of JUST Capital, explores JUST Capital's ranking methodologies, and presents the decision point faced by the CEO: requisite selection of one of three strategies in order for JUST Capital to generate “self-sustaining” revenue.

This study aims to explore how university language students evaluate different sustainability themes and examine the overall relevance of ecological, social, cultural and economic sustainability dimensions in language education.

A questionnaire was designed to study Finnish university language students’ (n = 55) order of priority for sustainability dimensions and their sub-themes and the justifications for the priority orders using a mixed methods design. Qualitative content analysis was conducted using NVivo software, and weighted rankings were used to analyse the quantitative data.

The findings of the study showed that language students evaluated the social and cultural dimensions as the most relevant in language teaching. In all dimensions, students approached sustainability mainly by prioritising larger issues and advancing towards smaller ones. Most non-directional responses appeared in the economic dimension. In addition, individual prioritising and justification approaches varied between different sustainability dimensions.

To the best of the authors’ knowledge, no previous studies have examined language students’ evaluations of and justifications for all four sustainability dimensions. The results highlight the need to use multiple, holistic approaches and systems thinking to incorporate education for sustainable development.

The COVID-19 pandemic has posed many challenges in almost all sectors around the globe. Because of the pandemic, government entities responsible for managing health-care resources face challenges in managing and distributing their limited and valuable health resources. In addition, severe outbreaks may occur in a small or large geographical area. Therefore, county-level preparation is crucial for officials and organizations who manage such disease outbreaks. However, most COVID-19-related research projects have focused on either state- or country-level. Only a few studies have considered county-level preparations, such as identifying high-risk counties of a particular state to fight against the COVID-19 pandemic. Therefore, the purpose of this research is to prioritize counties in a state based on their COVID-19-related risks to manage the COVID outbreak effectively.

In this research, the authors use a systematic hybrid approach that uses a clustering technique to group counties that share similar COVID conditions and use a multi-criteria decision-making approach – the analytic hierarchy process – to rank clusters with respect to the severity of the pandemic. The clustering was performed using two methods, k-means and fuzzy c-means, but only one of them was used at a time during the experiment.

The results of this study indicate that the proposed approach can effectively identify and rank the most vulnerable counties in a particular state. Hence, state health resources managing entities can identify counties in desperate need of more attention before they allocate their resources and better prepare those counties before another surge.

To the best of the authors’ knowledge, this study is the first to use both an unsupervised learning approach and the analytic hierarchy process to identify and rank state counties in accordance with the severity of COVID-19.

The purpose of this study is to identify and prioritize capabilities and practices to ensure a resilient supply chain during an unexpected disruption. In addition, this study ranks maturity factors that influence the main capabilities identified.

This paper is conducted in three stages. First, capabilities and practices are extracted through a literature review. Second, capabilities and practices are ranked using the analytical hierarchical process method. Third, a gray technique for order preference by similarity to ideal solution method is used to rank maturity factors influencing capabilities.

The findings indicate that responsiveness, readiness, flexibility and adaptability are the most important capabilities for supply chain resilience. Also, commitment and communication are the highest maturity factors influencing resilience capabilities.

The findings provide a hierarchical vision of capabilities and practices for industries to increase resilience. Limitations of the paper are related to capabilities, practices and number of experts consulted.

This paper highlights the importance of high-maturity practices in resilience capability adoption. The findings of this study will encourage decisions-makers to increase maturity practices to build resilience against disruption.

The paper reveals that developing powerful capabilities, good practices and a high level of maturity improve supply chain resilience.

Today, with the increasing involvement of the environment and human beings business units, paying attention to fulfilling social responsibility obligations while making a profit has become increasingly necessary for achieving sustainable development goals. Attention to profit by organizations should not be without regard to their social and environmental performance. Social responsibility accounting (SRA) is an approach that can pay more attention to the social and environmental performance of companies, but it has many barriers. Therefore, the purpose of this study is to identify barriers to SRA implementation and provide strategies to overcome these barriers.

In this study, the authors identify barriers to social responsibility accounting implementation and provide strategies to overcome these barriers. By literature review, 12 barriers and seven strategies were identified and approved using the opinions of six academic experts. Interpretive structural modeling (ISM) has been used to identify significant barriers and find textual relationships between them. The fuzzy technique for order performance by similarity to ideal solution (TOPSIS) method has been used to identify and rank strategies for overcoming these barriers. This study was undertaken in Iran (an emerging market). The data has been gathered from 18 experts selected using purposive sampling and included CEOs of the organization, senior accountants and active researchers well familiar with the field of social responsibility accounting.

Based on the results of this study, the cultural differences barrier was introduced as the primary and underlying barrier of the social responsibility accounting barriers model. At the next level, barriers such as “lack of public awareness of the importance of social responsibility accounting, lack of social responsibility accounting implementation regulations and organization size” are significant barriers to social responsibility accounting implementation. Removing these barriers will help remove other barriers in this direction. In addition, the results of the TOPSIS method showed that “mandatory regulations, the introduction of guidelines and social responsibility accounting standards,” “regulatory developments and government incentive schemes to implement social responsibility accounting,” as well as “increasing public awareness of the benefits of social responsibility accounting” are some of the essential social responsibility accounting implementation strategies.

The findings of the study have implications for both professional accounting bodies for developing the necessary standards and for policymakers for adopting policies that facilitate the implementation of social responsibility accounting to achieve sustainability.

This paper creates a new perspective on the practical implementation of social responsibility accounting, closely related to improving environmental performance and increasing social welfare through improving sustainability.

Experts believe that the strategies mentioned above will be very effective and helpful in removing the barriers of the lower level of the model. To the best of the authors’ knowledge, for the first time, this study develops a model of social responsibility accounting barriers and ranks the most critical implementation strategies.

This paper uses the complex proportionality assessment (COPRAS) method to examine the driving factors of Industry 4.0 (I4) technologies for lean implementation in small and medium-sized enterprises (SMEs).

Adopting I4 technology is imperative for SMEs seeking to maintain competitiveness within the manufacturing sector. A thorough understanding of the driving factors involved is required to support the implementation of I4. For this objective, the multi-criteria decision-making (MCDM) tool COPRAS was used to efficiently analyze and rank these driving elements based on their importance. These factors can help small and medium-sized firms (SMEs) prioritize their efforts and investments in I4 technologies for lean implementation.

This study evaluates and prioritizes the nine I4 factors according to the perceptions of SMEs. The ranking offers significant insights into the factors SMEs consider more accessible and effective when adopting I4 technologies.

The author's original contribution is to examine I4 driving factors for lean implementation in SMEs using COPRAS.

Since conducting agile strategies provides sustainable passenger satisfaction and revenue by replacing applied policies with more profitable ones rapidly, the focus of this study is to evaluate agile attributes for managing low-cost carriers (LCCs) operations by means of resources and competences based on dynamic capabilities built on resource-based view (RBV) theory and to achieve sustainable competitive advantage in a volatile and dynamic air transport environment. LCCs in Turkey are also evaluated in this study since the competition among LCCs is high to gain market share and they can adapt quickly to all kinds of circumstances.

Two well-known Multi-Criteria Decision-Making Methods (MCDM) named as the Stepwise Weight Assessment Ratio Analysis (SWARA) and multi-attributive border approximation area comparison (MABAC) methods by employing Picture fuzzy sets (PiFS) are employed to determine weight of agile attributes and superiority of LCCs based on agile attributes in the market, respectively. To check the consistency and robustness of the results for the proposed approach, comparative and sensitivity analysis are performed at the end of the study.

While the ranking orders of agile attributes are Strategic Responsiveness (AG1), Financial Management (AG4), Quality (AG2), Digital integration (AG3) and Reliability (AG5), respectively, LCC2 is selected as the best agile airline company in Turkey with respect to agile attributes. SWARA and MABAC method based on PiFS is appropriate and effective method to evaluate agile attributes that has important reference value for the airline companies in aviation industry.

The findings of this study will support managers in the airline industry to conduct airline operations more flexibly and effectively to take sustainable competitive advantage in unexpected and dynamic environment.

To the author' best knowledge, this study is the first developed to identify the attributes necessary to increase agility in LCCs. Thus, as a systematic tool, a framework is developed for the implementation of agile attributes to achieve sustainable competitive advantage in the airline industry and presented a roadmap for airline managers to deal with crises and challenging situations by satisfying customer and increasing competitiveness.