Search results

This paper comprehensively addresses the influence of chopped strand mat glass fiber-reinforced polymer (GFRP) patch configurations such as geometry, dimensions, position and the number of layers of patches, whether a single or double patch is used and how well debonding the area under the patch improves the strength of the cracked aluminum plates with different crack lengths.

Single-edge cracked aluminum specimens of 150 mm in length and 50 mm in width were tested using the tensile test. The cracked aluminum specimens were then repaired using GFRP patches with various configurations. A three-dimensional (3D) finite element method (FEM) was adopted to simulate the repaired cracked aluminum plates using composite patches to obtain the stress intensity factor (SIF). The numerical modeling and validation of ABAQUS software and the contour integral method for SIF calculations provide a valuable tool for further investigation and design optimization.

The width of the GFRP patches affected the efficiency of the rehabilitated cracked aluminum plate. Increasing patch width WP from 5 mm to 15 mm increases the peak load by 9.7 and 17.5%, respectively, if compared with the specimen without the patch. The efficiency of the GFRP patch in reducing the SIF increased as the number of layers increased, i.e. the maximum load was enhanced by 5%.

This study assessed repairing metallic structures using the chopped strand mat GFRP. Furthermore, it demonstrated the superiority of rectangular patches over semicircular ones, along with the benefit of using double patches for out-of-plane bending prevention and it emphasizes the detrimental effect of defects in the bonding area between the patch and the cracked component. This underlines the importance of proper surface preparation and bonding techniques for successful repair.

In manufacturing, dedicated machine tools and flexible machine tools are failing to satisfy the ever-changing manufacturing demands of short life cycles and dynamic nature of products. These machines are limited when new product designs are introduced. The solution lies in developing responsive machines that can be adjusted or be changed functionally when these change requirements arise. These machines are reconfigurable machines which are becoming the new focus, as they rapidly respond to product variety and volume changes. A sheet metal working machine known as a reconfigurable guillotine shear and bending press machine (RGS&BPM) has been developed. The purpose of this paper is to present a methodology, function-oriented design approach (FODA), which was developed for the design of the RGS&BPM.

The design of the machine is based on the six principles of reconfigurable manufacturing systems (RMSs), namely, modularity, scalability integrability, convertibility, diagnosability and customisability. The methodology seeks to optimise the design process of the RGS&BPM through a design of modules that make up the machine, enable its conversion and reconfiguration. The FODA is focussed on function identification to select the operational function required. Two main functions are recognised for the machine, these being cutting and bending; hence, the design revolves around these two and reconfigurability.

The developed design methodology was tested in the design of a prototype for the reconfigurable guillotine shear and bending press machine. The prototype is currently being manufactured and will be subjected to functional tests once completed. This paper is being presented not only to present the methodology by to show and highlight its practical applicability, as the prototype manufacturers have been enthusiastic about this new approach.

The research was limited to the design methodology for the RGS&BPM, the machine which has been designed to completion using this methodology, with prototype being manufactured.

This study presents critical steps and considerations in the development of reconfigurable machines. The main thrust being to explore the best possibility of developing the machines with dual functionality that will assist in availing the technology to manufacturer. As the machine has been development, the success of the design can be directly attributed to the FODA methodology, among other contributing factors. It also highlights the significance of the principles of RMS in reconfigurable machine design.

The RGS&BM machine is an answer for the small-to-medium enterprises (SMEs), as the machine replaces two machines with one, and the methodology ensures its affordable design. It contributes immensely to the machine availability by eliminating trial and error approaches.

This study presents a new approach to the design of reconfigurable dual machines using principles of RMS. As the targeted market is the SME, it is not limited to that as any entrepreneur may use the machine to their advantage. The design methodology presented contributes to the body of knowledge in dual reconfigurable machine tool design.

In the purview of stress–turnover relationship, the present study aims to explore the endogenous and exogenous aspects of stress and employees' turnover intentions. Further, it also intends to evaluate the mediating role of perceived employee's exploitation between stressors and employee turnover intentions. For that matter, antecedents of stressors were identified and classified into endogenous and exogenous stressors: endogenous stressors relate to the employees' negative psychological contact within an organization and exogenous stressors are various macro-economic factors which have a considerable influence on employees' workplace behavior.

For the purpose of this study, this study choses private school teachers as respondents working in the economically depressed state of India. Thus, data for the present study has been collected from 628 private school teachers of J&K (India) which were randomly selected. In order to ensure valid and reliable statistical inferences from the study, data collected has been validated using confirmatory factor analysis and hypothesis testing has been carried out through structural equation modeling.

It was found that both types of stressors were contributing negatively toward employee's psychological state resulting in undesirable employee organizational relationships manifested as turnover intentions among employees. Moreover, perceived employee's exploitation was found to intensify the relationship of employee turnover as a dependent variable regressed on endogenous, exogenous and occupational stress by fully mediating the stress–turnover intricacies.

The implications of the study include the identification of employees' stressor needs in order to gauge the understanding of the mechanism by which employees react to their environment and develop attitudes toward their jobs. The present study includes a small sample size obtained from private educational institutions only. Therefore, there is a need to take a geographically diverse sample that is inevitable for universal inferences and validity.

Very little research has been conducted to explore endogenous, exogenous and unique stressors such as economic stress and perceived external opportunities which constitute the overall stress. Moreover, to the best of the authors’ knowledge, this is the first study which tests the model empirically that examines the effect of stress–turnover relationship through perceived employee's exploitation in the teaching and educational sector.