Search results

The construction industry shows an increased interest in how to manage logistics within construction projects. Often construction logistics is outsourced to a logistics service provider (LSP). However, construction logistics is normally approached either as a strategic decision or as an operational issue and rarely as a tactical concern. The purpose of this study is to explore how to organize the logistics outsourcing decision at strategic, tactical and operational levels.

This study is performed as a single-case study within a construction corporation, containing (amongst others) a building contractor (BC) and a construction equipment rental company (CERC) offering logistics services.

The study shows that to procure construction logistics service successfully, BCs need logistics capabilities at strategic and tactical levels to maintain an alignment between the use of logistics services and operational characteristics. Simultaneously, CERC’s need to design their service offerings to correspond to the needs of the BC.

This study builds on a single-case study of a Swedish construction corporation. Further research is needed to better understand current logistics outsourcing and development practices and how these can be improved to foster better logistics management at the project level.

BCs find suggestions of different logistics organization structures and suitable outsourcing arrangements. CERCs and LSPs can use the findings to understand their customers’ needs and adapt service offerings.

To the best of the authors’ knowledge, this study is one of the first studies of how two companies within a corporation can work together to develop construction logistics service offerings.

This paper aims to explore the process of implementing solar photovoltaic (PV) systems in construction to contribute to the understanding of systemic innovation in construction.

The exploratory research presented is based on qualitative data collected in workshops and interviews with 76 construction- and solar-industry actors experienced in solar PV projects. Actor-specific barriers were identified and analysed using an abductive approach.

In light of established definitions of systemic innovation, the process of implementing solar PV systems in construction involves challenges regarding technical and material issues, competencies, and informal and formal institutions. The specificities of this case highlight the necessity of paying attention to details in the process and to develop knowledge of systemic innovation in construction since the industry’s involvement in addressing societal challenges related to the energy transition will require implementing such innovations much more in the future.

New knowledge of solar PV systems as an innovation in professional construction is collected, enabling the adaptation of management strategies for its implementation. This knowledge can also be applied generally to other challenges encountered in highly systemic innovation implementation. Solar industry actors can gain an understanding of solar-specific challenges for the construction industry, challenges for which they must adapt their activities.

The exploration of actor-specific experiences of solar PV projects has resulted in a novel understanding of this specific innovation and its implementation. The findings illustrate a case of a high level of systemic innovation and the need to use a finer-grained scale for classification when studying innovation in construction.

The paper aims to apply social practice theory to clarify the process of innovation design and delivery from one successful digital innovation: the building information modelling (BIM) risk library. The paper clarifies the practices surrounding construction innovation and provides a schema useful for practitioners and technology designers through a social practice analysis.

The paper applies Schatzki's “organisation of practice” concepts to a construction project innovation to clarify how the practice of innovation revolves around understandings, rules and teleoaffectivities (emotive behaviours). Sources for the study include notes from meetings, workshops with experts and the shared artefacts of innovation.

The practice of innovation design and delivery are clarified through a social practice analysis: a distinct “field of practice” and a “schema” of generalisable prescriptions and preferences for innovation delivery being presented.

The paper informs the practice and process of innovation design and delivery; the insights clarify how collective understandings and rules of use evolve over time, becoming formalised into contracts, agreements and workplans. Practically, processes whereby innovation “sayings” evolve into innovation “doings” are clarified: a schema detailing prescriptions and preferences of practitioners and developers being presented.

The social practice analysis of one successful construction innovation is an original contribution to the body of knowledge, adding a level of detail regarding innovation design and delivery often missing from reported research.

The purpose of this paper is to understand if and how industrialized house building (IHB) could support productivity developments for housebuilding on project and industry levels. The take is that fragmentation of construction is one explanation for the lack of productivity growth, and that IHB could be an integrating method of overcoming horizontal and vertical fragmentation.

Singe-factor productivity measures are calculated based on data reported by IHB companies and compared to official produced and published research data. The survey covers the years 2013–2020 for IHB companies building multi-storey houses in timber. Generalization is sought through descriptive statistics by contrasting the data samples to the used means to control vertical and horizontal fragmentation formulated as three theoretical propositions.

According to the results, IHB in timber is on average more productive than conventional housebuilding at the company level, project level, in absolute and in growth terms over the eight-year period. On the company level, the labour productivity was on average 10% higher for IHB compared to general construction and positioned between general construction and general manufacturing. On the project level, IHB displayed an average cost productivity growth of 19% for an employed prefabrication degree of about 45%.

Empirical evidence is presented quantifying so far perceived advantages of IHB. By providing analysis of actual cost and project data derived from IHB companies, the article quantifies previous research that IHB is not only about prefabrication. The observed positive productivity growth in relation to the employed prefabrication degree indicates that off-site production is not a sufficient mean for reaching high productivity and productivity growth. Instead, the capabilities to integrate the operative logic of conventional housebuilding together with logic of IHB platform development and use is a probable explanation of the observed positive productivity growth.

The purpose of this study is to describe latent classes explaining the innovation logic in the Finnish construction companies. Innovativeness is a driver of competitive performance and vital to the long-term success of any organisation and company.

Using finite mixture structural equation modelling (FMSEM), the authors have classified innovation logic into latent classes. The method analyses and recognises classes for companies that have similar logic in innovation activities based on the collected data.

Through FMSEM analysis, the authors have identified three latent classes that explain the innovation logic in the Finnish construction companies – LC1: the internal innovators; LC2: the non-innovation-oriented introverts; and LC3: the innovation-oriented extroverts. These three latent classes clearly capture the perceptions within the industry as well as the different characteristics and variables.

The presented latent classes explain innovation logic but is limited to analysing Finnish companies. Also, the research is quantitative by nature and does not increase the understanding in the same manner as qualitative research might capture on more specific aspects.

This paper presents starting points for construction industry companies to intensify innovation activities. It may also indicate more fundamental changes for the structure of construction industry organisations, especially by enabling innovation friendly culture.

This study describes innovation logic in Finnish construction companies through three models (LC1–LC3) by using quantitative data analysed with the FMSEM method. The fundamental innovation challenges in the Finnish construction companies are clarified via the identified latent classes.

Higher education institutions and their lecturers are strategic agents and main drivers that contribute to circular economy transition. This requires them to understand the key circular economy competencies and how to integrate circular economy holistically into their curricula with the suitable teaching and learning approaches. This study aims to support them by providing an overview on the characteristics of education for the circular economy (ECE) and suggestions to lecturers to further develop their curricula.

The data consisted of scientific articles (n = 22) describing circular economy courses in higher education. Qualitative content analysis with quantitative features was performed on the selected articles to answer the research question.

The findings confirm that the system’s focus is the key issue in ECE. However, to integrate circular economy holistically into the curricula, ECE should be implemented more widely in the context of different industries and market contexts to find innovative teaching and learning approaches. The demand side needs to be incorporated in the courses, as systemic transformation is also about transforming consumption. All levels of implementation and circular economy objectives should be included in courses to promote systems thinking. In addition, innovative forms of real workplace interaction should be increased.

As ECE has started to emerge as a new field of study, this article provides the first integrated overview of the topic.

Collaborative projects require overlapping skills and capabilities to facilitate knowledge transfer. However, not all kinds of learning are virtuous and some may lead to leakage of commercially valuable knowledge. The purpose of this paper is to explain and restrain leakage of organizational competitive knowledge in collaborative projects.

A total of 398 survey questionnaires are collected from project-based firms in Pakistan. We gathered data from horizontal and vertical collaborations. Analysis is conducted with transaction cost economics lens through Process Macro 3.0.

Findings suggest that partner’s learning intent (PLI) and distrust positively affect knowledge leakage, whereas human resource management (HRM) practices have negative effect on knowledge leakage. Furthermore, HRM practices negatively moderate the relationship between PLI and knowledge leakage and distrust positively mediates it.

This study integrates HRM with knowledge management to restrain knowledge leakage and contributes to knowledge management and strategic management. This study examines knowledge leakage in the presence of passive opportunism.

This study explains how passive opportunism translates into opportunistic behavior. Besides, effectiveness of HRM practices are least surveyed to restrain passive and active opportunisms.

This paper aims to shed light on how the composition of future blended learning (BL) courses can be changed to provide students with quality academic learning experiences. The model suggested in this study will guide instructors on how to design their course learning outcomes to ensure effective delivery.

The new model has been developed by combining Bloom's taxonomy and Carman's model. Later, a new framework entitled “PATHCO” based on an extensive literature review is applied to enhance the quality of all five components of Carman's model.

The PATHCO conceptual framework has been developed to ensure quality in the five main teaching and learning factors. This framework covers criteria like pedagogical, assessments, technical, health care and organizational. Further research is required to broaden the main elements of the suggested framework and to validate this research through a case study.

The COVID-19 pandemic has transformed the landscape of the education sector by encouraging an extensive acceptance of technology-enhanced learning and teaching. Blended learning (BL) has become the most appropriate medium to deliver online learning (OL). However, educators and students have reported dissatisfaction with the BL mode of delivery. To address this dissatisfaction, this study outlines, using the PATHCO model, all the essential building blocks which are required to find the right blend of both face-to-face and online components.

This study aims to explore the ways that social enterprises (SE) create value by embedding themselves in networks through the process of social innovation (SI). The processes of achieving common social missions were studied through selected organizations using an open approach to SI. Novel operational structures as well as unique forms of created value were explored.

Two organizations embedded in local and international networks were studied and were chosen due to their SI profiles. The study was based on qualitative exploratory research. In-depth analysis was conducted through interviews, open discussions, document analysis as well as personal observation to understand the dynamic interrelatedness of the main factors influencing success of SI ventures.

This paper identified the role of SI in SEs embedded in networks. Furthermore, the social value creation processes of these organizations as well as the value they create were explored. Based on the findings, SI is rooted in the personality of the included members of the network. The tools of collaboration are platforms that connect the network members to each other. The embedded organizations apply the concept of community sharing with the aim of social value creation.

By focusing mainly on system design principles, the sample consists of mainly those at the core of organizations in facilitator roles, leaving peripheral actor perceptions to be determined by secondhand observations.

While providing a general summary of factors influencing SI activities from extent literature, the paper mainly contributes by providing deeper insight into complex models of SI practices used by SEs. The paper further contributes to popularizing the growing role of SI activities in SEs.

The purpose of this paper is to identify the areas and logic of integration of different stakeholders using different methods and to analyse their applicability and challenges in practical projects. The main aim is to describe how these different methods impact value creation.

Action design research was carried out in a large hospital construction project where the first author acted as an “involved researcher” and the second author acted as an “outside researcher”. Two workshops were organised to evaluate the direct and indirect challenges and benefits of the applied four methods and to explain how different methods enable value creation.

All the studied methods provide good results in terms of usability and commitment to the aims of the project, thus delivering the direct benefits expected. Process, people and tools logic works well in this case project when applying the methods properly. Significant evidence was provided on secondary deliverables of the methods, and all analysed methods had a significant impact in the area of leading people, clarifying what “focus on people” means and how it is enabled.

Focus on people can be achieved through different operative methods if applied in the right way. It is necessary to select the most suitable methods based on all the direct and indirect deliverables.

This case project offered a platform to analyse integration methods in a real-life project using the collaborative contract method. The authors were able to participate in the analysis by taking action from the very beginning of the project in terms of training, learning, continuous development and coaching of these methods and evaluating the applicability.