Search results

Electric motor heating during biomass recovery and its handling on conveyor is a serious concern for the motor performance. Thus, the purpose of this paper is to design and develop a hardware prototype of master–slave electric motors based biomass conveyor system to use the motors under normal operating conditions without overheating.

The hardware prototype of the system used master–slave electric motors for embedded controller operated robotic arm to automatically replace conveyor motors by one another. A mixed signal based embedded controller (C8051F226DK), fully compliant with IEEE 1149.1 specifications, was used to operate the entire system. A precise temperature measurement of motor with the help of negative temperature coefficient sensor was possible due to the utilization of industry standard temperature controller (N76E003AT20). Also, a pulse width modulation based speed control was achieved for master–slave motors of biomass conveyor.

As compared to conventional energy based mains supply, the system is self-sufficient to extract more energy from solar supply with an energy increase of 11.38%. With respect to conventional energy based \ of 47.31%, solar energy based higher energy saving of 52.69% was reported. Also, the work achieved higher temperature reduction of 34.26% of the motor as compared to previous cooling options.

The proposed technique is free from air, liquid and phase-changing material based cooling materials. As a consequence, the work prevents the wastage of these materials and does not cause the risk of health hazards. Also, the motors are used with their original dimensions without facing any leakage problems.

This study aimed to assess the influence of the community-based campaign on weight loss and healthy lifestyle adoption among Bahrain's adult population.

A cross -sectional self-reported online questionnaire completed in February 2021. The survey evaluated the impact of the community-based campaign health program which includes (exercise, diet plan and psychological eating behavior) weight reduction using social media platforms. The authors employed data from young and middle-aged healthy adults (n = 842) between the ages of 18-55 years, of both sexes. The intervention group (n = 842) was made up of the supporters of the voluntary community initiative called Obesity does not Suit Me (n = 194), and the control group (n = 648) was made up of non-followers of the campaign.

The study showed a statistically significant difference among the followers of the community-based campaign health program in the following parameters: 3.90-4.23 kg less, 1.46-1.59 difference in BMI and 0.05-0.06 WHR. All changes were of low effect size.

Diet and exercise had significant impact on weight, BMI and WHR among the followers of the community campaign. However, more research is required for sponsorship to increase the motivation and rewards for the community campaign.

Perspiration and heat are produced by the body and must be eliminated to maintain a stable body temperature. Sweat, heat and air must pass through the fabric to be comfortable. The cloth absorbs sweat and then releases it, allowing the body to chill down. By capillary action, moisture is driven away from fabric pores or sucked out of yarns. Convectional air movement improves sweat drainage, which may aid in body temperature reduction. Clothing reduces the skin's ability to transport heat and moisture to the outside. Excessive moisture makes clothing stick to the skin, whereas excessive heat induces heat stress, making the user uncomfortable. Wet heat loss is significantly more difficult to understand than dry heat loss. The purpose of this study is to provided a good compilation of complete information on wet thermal comfort of textile and technological elements to be consider while constructing protective apparel.

This paper aims to critically review studies on the thermal comfort of textiles in wet conditions and assess the results to guide future research.

Several recent studies focused on wet textiles' impact on comfort. Moisture reduces the fabric's thermal insulation value while also altering its moisture characteristics. Moisture and heat conductivity were linked. Sweat and other factors impact fabric comfort. So, while evaluating a fabric's comfort, consider both external and inside moisture.

The systematic literature review in this research focuses on wet thermal comfort and technological elements to consider while constructing protective apparel.

The objective of this study was to develop wearable suit platforms with various anchoring structure designs with the intention of improving wearability and enhancing user satisfaction.

This study selected fabrics and materials for the suit platform through material performance tests. Two anchoring structure designs, 11-type and X-type are compared with regular clothing under control conditions. To evaluate the comfort level of the wearable suit platform, a satisfaction survey and electroencephalogram (EEG) measurements are conducted to triangulate the findings.

The 11-type exhibited higher values in comfort indicators such as α, θ, α/High-β and lower values in concentration or stress indicators such as β, ϒ, sensorimotor rhythm (SMR)+Mid-β/θ, and a spectral edge frequency of 95% compared to the X-type while walking. The 11-type offers greater comfort and satisfaction compared to the X-type when lifting based on the EEG measurements and the participants survey.

It is recommended to implement the 11-type when designing wearable suit platforms. These findings offer essential data on wearability, which can guide the development of soft wearable robots.

Accurate and automatic clothing pattern making is very important in personalized clothing customization and virtual fitting room applications. Clothing pattern generating as well as virtual clothing simulation is an attractive research issue both in clothing industry and computer graphics.

Physics-based method is an effective way to model dynamic process and generate realistic clothing animation. Due to conceptual simplicity and computational speed, mass-spring model is frequently used to simulate deformable and soft objects follow the natural physical rules. We present a physics-based clothing pattern generating framework by using scanned human body model. After giving a scanned human body model, first, we extract feature points, planes and curves on the 3D model by geometric analysis, and then, we construct a remeshed surface which has been formatted to connected quad meshes. Second, for each clothing piece in 3D, we construct a mass-spring model with same topological structures, and conduct a typical time integration algorithm to the mass-spring model. Finally, we get the convergent clothing pieces in 2D of all clothing parts, and we reconnected parts which are adjacent on 3D model to generate the basic clothing pattern.

The results show that the presented method is a feasible way for clothing pattern generating by use of scanned human body model.

The main contribution of this work is twofold: one is the geometric algorithm to scanned human body model, which is specially conducted for clothing pattern design to extract feature points, planes and curves. This is the crucial base for suit clothing pattern generating. Another is the physics-based pattern generating algorithm which flattens the 3D shape to 2D shape of cloth pattern pieces.

This paper aims to discuss the adequacy of restrictive measures. Providing a synopsis of a global movement toward the imposition of target restrictive measures. Questioning the success of targeted restrictive measures in obtaining behavioural change. Identifying a reversion to the implementation of wide ranging sectoral restrictive measures in an attempt to encourage immediate behavioural change. Accessing the success of using restrictive measures to encourage democratic regimes in Africa.

This study is a desktop research that examines European Parliament and Council issued Regulations for the jurisdictions of Iran, Russia and Belarus. Academic research is also used in identifying a pendulum swing by global legislatures with respect to the imposition of targeted measures to requiring the imposition of additional wide ranging sectoral measures.

Targeted measures can be circumvented using non-hostile third countries. Academic research identifies that wide reaching sectoral sanctions encourage regime change. Therefore, where targeted measures fail to give rise to their desired persuasive objectives. The legislator moves to introduce additional measures, also comprising of sectoral sanctions. Sectoral sanctions have been applied by the European Union in Iran, Russia and Belarus. The USA has taken measures to limit Russia ability to use Turkey as a transshipment hub. The African continent case study identifies the importance of creating an architecture founded on upholding positive governance and human rights standards. Failure to do so leads to a revolving system of authoritarian regimes, sanctioned by restrictive measures.

This paper is a desktop review composed by the author.

This papers aims to study lattice structures in terms of geometric variables, manufacturing variables and material-based variants and their correlation with compressive behaviour for their application in a methodology for the design and development of personalized elastic therapeutic products.

Lattice samples were designed and manufactured using extrusion-based additive manufacturing technologies. Mechanical tests were carried out on lattice samples for elasticity characterization purposes. The relationships between sample stiffness and key geometric and manufacturing variables were subsequently used in the case study on the design of a pressure cushion model for validation purposes. Differentiated areas were established according to patient’s pressure map to subsequently make a correlation between the patient’s pressure needs and lattice samples stiffness.

A substantial and wide variation in lattice compressive behaviour was found depending on the key study variables. The proposed methodology made it possible to efficiently identify and adjust the pressure of the different areas of the product to adapt them to the elastic needs of the patient. In this sense, the characterization lattice samples turned out to provide an effective and flexible response to the pressure requirements.

This study provides a generalized foundation of lattice structural design and adjustable stiffness in application of pressure cushions, which can be equally applied to other designs with similar purposes. The relevance and contribution of this work lie in the proposed methodology for the design of personalized therapeutic products based on the use of individual lattice structures that function as independent customizable cells.

The paper aims to explore the roles and impact of design in incubating and accelerating social enterprises. It aims to understand design’s influence on social enterprise ecosystems and in improving outcomes for social enterprises.

The study used an exploratory, qualitative approach, using case studies and interviews. The comparative case-study methodology was applied to evaluate the influence of design on the development of social enterprises in the UK and South Korea and identify critical issues in their utilisation of design. Empirical data included: in-depth case studies of design utilisation practices (UK = 6; South Korea = 15) and design applications (UK = 2; South Korea = 2) for the growth of social enterprise and its ecosystem; 27 social enterprise/design experts (UK = 17; South Korea = 10); and 22 social enterprises (UK = 12; South Korea = 10). Content and thematic analysis were used to synthesise the findings.

Findings demonstrate the differing influences of design on social enterprise, from improving products/services and business models to enhancing social enterprise ecosystem support and networks. Future directions are suggested for applying design for social enterprise growth, business stage development and systematising interactions between the social enterprise and design sectors.

The research is based on case studies from only two countries. Further, the adoption of working definitions of social enterprise in the countries may result in the research underestimating the heterogeneity of social enterprise.

The findings contribute to optimising efficient ecosystem development to improve social enterprise competitiveness and innovation.

This paper establishes a research foundation on design for social enterprise, offering theoretical and practical insights into its impact on growth.

The purpose of this paper is to explore teacher candidates’ response to young adult literature (prose and comics) featuring fat identified protagonists. The paper considers the textual and embodied resources readers use and reject when imagining and interpreting a character’s body. This paper explores how readers’ meaning making was influenced when reading prose versus comics. This paper adds to a corpus of scholarship about the relationships between young adult literature, comics, bodies and reader response theory.

At the time of the study, participants were enrolled in a teacher education program at a Midwestern University, meeting monthly for a voluntary book club dedicated to reading and discussing young adult literature. To examine readers’ responses to comics and prose featuring fat-identified protagonists, the author used descriptive qualitative methodologies to conduct a thematic analysis of meeting transcripts, written participant reflections and researcher memos. Analysis was grounded in theories of reader response, critical fat studies and multimodality.

Analyses indicated many readers reject textual clues indicating a character’s body size and weight were different from their own. Readers read their bodies into the stories, regarding them as self-help narratives instead of radical counternarratives. Some readers were not able to read against their assumptions of thinness (and whiteness) until prompted by the researcher and other participants.

Although many reader response scholars have demonstrated readers’ tendencies toward personal identification in the face of racial and class differences, there is less research regarding classroom practices around the entanglement of physical bodies, body image and texts. Analyzing reader’s responses to the constructions of fat bodies in prose versus comics may help English Language Arts (ELA) educators and students identify and deconstruct ideologies of thin-thinking and fatphobia. This study, which demonstrates thin readers’ tendencies to overidentify with protagonists, suggests ELA classrooms might encourage readers to engage in critical literacies that support them in reading both with and against their identities.

This paper aims to explore how music festival organisers negotiate diversity and inclusion in marketing and promotion practices through symbolic and social boundaries.

Based on semi-structured interviews with 18 festival organisers in Rotterdam and participant observation with six festival photographers I show that symbolic and social boundaries are employed in three areas: (1) boundaries in festival format (i.e. [partially] free or ticketed), (2) boundaries in distribution partners and technologies and (3) boundaries in promotional content.

Symbolic and social boundaries are intentionally used by festival organisers to build and delineate festival audiences. Implications are drawn on current understandings of the accessibility of music festival spaces, arguing that festival research should move beyond within-space dynamics to grasp the negotiation of diversity and inclusion at festivals more fully.

While music festivals are often marketed as celebratory spaces that are “welcoming to everyone”, few studies have investigated diversity and inclusion nor marketing and promotion practices at music festivals. This study shows how festival audiences are shaped through marketing and promotion practices.