Search results

This study aims to increase the novelty of clothing design and fabric texture. The element library that can be used for design is systematically summarized. The element database can also be continuously filled according to the existing logic to realize the diversity of design. Improve the theory of fashion design, expand the designer's design ideas and improve design efficiency. Clear design steps and logic can help students and machines learn the design process and promote the development of intelligent design. And verify the feasibility of the simulation software to assist pleated clothing design.

Firstly, according to the logical framework of origami theory, different innovative designs and combined designs are made for the basic units of hyperbolic paraboloid, and the element library that can be used for design is systematically summarized. This database can also be continuously filled according to the existing logic to realize the diversity of design. Secondly, it summarizes three methods of pleated element filling clothing – uniform filling method, the irregular filling method and geometric addition method – that improve the theory of fashion design, expand the designer's design ideas and improve design efficiency. Clear design steps and logic can help students and machines learn the design process and promote the development of intelligent design. Finally, the virtual software is used to simulate the effect of pleated clothing, and the three-dimensional simulation software 3dclo is used to make an empirical study on the application of hyperbolic paraboloid origami in clothing pleated design to verify the feasibility of the simulation software to assist pleated clothing design.

The theoretical results of hyperbolic paraboloid origami are collected and arranged to establish the element library of hyperbolic paraboloid origami. The results expand the designer's design ideas and auxiliary design technology and improve the design efficiency using a sample of hyperbolic paraboloid fabric to verify its practicability and three-dimensional clothing simulation software for exploring the design. The design rules of hyperbolic paraboloid clothing and the realization method of fabric are summarized, including the expansion and combing of elements, the application of size and shape and the method of combination.

Owing to the hyperbolic paraboloid origami’s length shrinkage, the loose computation of clothing requires targeted computation. This paper solely applies a paper model for estimating the shrinkage, and then we tend to subsequently explore the way to precisely compute the porosity, to determine the existing differences in the two-dimensional shrinkage of hyperbolic paraboloid creases of varying materials and to know if the clothing after large-scale production is capable of reaching the anticipated value.

The exploration of this experiment brings a new 3D experiment process to the design process.

This experiment brings new possibilities for the development of virtual fitting and virtual display in the industry.

This study combines hyperbolic paraboloid origami and clothing and combs and expands the unit with logical thinking to expand the designer's design ideas.

This study aims to investigate the daily performance of the proposed microgrid (MG) that comprises photovoltaic, wind turbines and is connected to the main grid. The load demand is a residential area that includes 20 houses.

The daily operational strategy of the proposed MG allows to vend and procure utterly between the main grid and MG. The smart metre of every consumer provides the supplier with the daily consumption pattern which is amended by demand side management (DSM). The daily operational cost (DOC) CO2 emission and other measures are utilized to evaluate the system performance. A grey wolf optimizer was employed to minimize DOC including the cost of procuring energy from the main grid, the emission cost and the revenue of sold energy to the main grid.

The obtained results of winter and summer days revealed that DSM significantly improved the system performance from the economic and environmental perspectives. With DSM, DOC on winter day was −26.93 ($/kWh) and on summer day, DOC was 10.59 ($/kWh). While without considering DSM, DOC on winter day was −25.42 ($/kWh) and on summer day DOC was 14.95 ($/kWh).

As opposed to previous research that predominantly addressed the long-term operation, the value of the proposed research is to investigate the short-term operation (24-hour) of MG that copes with vital contingencies associated with selling and procuring energy with the main grid considering the environmental cost. Outstandingly, the proposed research engaged the consumers by smart meters to apply demand-sideDSM, while the previous studies largely focused on supply side management.

Key to transnational higher education (HE) cooperation is building trust to allow for seamless recognition of studies. Building on the Tuning Educational Structures initiative (2001) and lessons learnt from the Organisation for Economic Cooperation and Development (OECD)-Assessment of Learning Outcomes in Higher Education (AHELO) feasibility study, this paper offers a sophisticated approach developed by the European Union (EU)-co-financed project Measuring and Comparing Achievements of Learning Outcomes in Europe (CALOHEE). These evidence the quality and relevance of learning by applying transparent and reliable indicators at the overarching and disciplinary levels. The model results allow for transnational diagnostic assessments to identify the strength and weaknesses of degree programmes.

The materials presented have been developed from 2016 to 2023, applying a bottom-up approach involving approximately 150 academics from 20+ European countries, reflecting the full spectrum of academic fields. Based on intensive face-to-face debate and consultation of stakeholders and anchored in academic literature and wide experience.

As a result, general (overarching) state-of-the-art reference frameworks have been prepared for the associated degree, bachelor, master and doctorate, as well as aligned qualifications reference frameworks and more detailed learning outcomes/assessment frameworks for 11 subject areas, offering a sound basis for quality assurance. As a follow-up, actual assessment formats for five academic fields have been developed to allow for measuring the actual level of learning at the institutional level from a comparative perspective.

Frameworks as well as assessment models and items are highly innovative, content-wise as in the strategy of development, involving renown academics finding common ground. Its value is not limited to Europe but has global significance. The model developed, is also relevant for micro-credentials in defining levels of mastery.

Climate change poses risks to society and the demand for carbon literacy within small and medium-sized enterprises is increasing. Skills and knowledge are required for organizational greenhouse gas accounting and science-based decisions to help businesses reduce transitional risks. At the University of Copenhagen and the University of Northern British Columbia, two carbon management courses have been developed to respond to this growing need. Using an action-based co-learning model, students and business are paired to quantify and report emissions and develop climate plans and communication strategies.

This paper draws on surveys of businesses that have partnered with the co-learning model, designed to provide insight on carbon reductions and the impacts of co-learning. Data collected from 12 respondents in Denmark and 19 respondents in Canada allow for cross-institutional and international comparison in a Global North context.

Results show that while co-learning for carbon literacy is welcomed, companies identify limitations: time and resources; solution feasibility; governance and reporting structures; and communication methods. Findings reveal a need for extension, both forwards and backwards in time, indicating that the collaborations need to be lengthened and/or intensified. Balancing academic requirements detracts from usability for businesses, and while municipal and national policy and emission targets help generate a general societal understanding of the issue, there is no concrete guidance on how businesses can implement operational changes based on inventory results.

The research brings new knowledge to the field of transitional climate risks and does so with a focus on both small businesses and universities as important co-learning actors in low-carbon transitions. The comparison across geographies and institutions contributes an international solution perspective to climate change mitigation and adaptation strategies.

This study aims to provide an alternative adoption to overcome the energy crisis and environmental effluence by comparative theoretical and trial testing analysis of an innovative combined condenser unit over traditional individual condenser unit water heating systems.

The presented innovative new unit of the combined condenser heat pipe works efficiently through its improved idea and unique design, providing uniform heating to improve the heat transfer and, finally, the temperature of water increases without enhancing the cost. In this design, all these five evaporator units were connected with a single combined condenser unit in such a manner that after the condensation of heat transfer fluid vapour, it goes equally into the evaporator pipe.

The maximum temperature of hot water obtained from the combined condenser heating system was 60.6, 55.5 and 50.3°C at a water flow rate of 0.001, 0.002 and 0.003 kg/s, respectively. The first and second law thermodynamic efficiency of the combined condenser heating system were 55.4%, 60.5% and 89.0% and 2.6%, 3.7% and 4.1% at 0.001, 0.002 and 0.003 kg/s of water flow rates, respectively. The combined condenser heat pipe solar evacuated tube heating system promoting progressive performance is considered efficient and environment-friendly compared to the traditional condenser unit water heating system.

Innovative combined condenser heat pipe evacuated tube collector assembly was designed and developed for the study. A comparative theoretical and experimental energy-exergy performance analysis was performed of innovated collective condenser and traditional individual condenser heat pipe water heating system at various mass flow rate.

This study aims to explore the use of a double diamond design method to engage the industry in a sector-wide response to the issues of food waste as constructed by consumers. This particular design method is achieved by an exploration of a collective intelligence-participatory design (CIPD) project to engage industry participants in understanding and responding to consumers’ perceptions of the role of packaging in reducing food waste.

Using the UK Design Council’s double diamond design method as a guiding conceptual principle, the project recruited industry participants from medium to large food businesses across various food categories. Two scoping workshops with industry were held prior to the initiation of a 12-stage project (n = 57), and then two industry workshops were held (n = 4 and 14). Eighty participants completed an online qualitative survey, and 23 industry participants took part in a Think Tank Sprint Series. The Think Tanks used participatory design approaches to understand barriers and opportunities for change within food industry sub-sectors and test the feasibility and acceptability of package designs to reduce consumer waste.

For CIPD to work for complex problems involving industry, it is vital that stakeholders across macro- and micro-subsystems are involved and that adequate time is allowed to address that complexity. Using both the right tools for engagement and the involvement of the right mix of representatives across various sectors of industry is critical to reducing blame shift. The process of divergence and convergence allowed clear insight into the long-term multi-pronged approach needed for the complex problem.

Participatory design has been useful within various behaviour change settings. This paper has demonstrated the application of the double diamond model in a social marketing setting, adding value to an industry-wide project that included government, peak bodies, manufacturing and production and retailers.

Demonstrate proof-of-concept for conducting NFL Draft trades on a blockchain network using smart contracts.

Using Ethereum smart contracts, the authors model several types of draft trades between teams. An example scenario is used to demonstrate contract interaction and draft results.

The authors show the feasibility of conducting draft-day trades using smart contracts. The entire negotiation process, including side deals, can be conducted digitally.

Further work is required to incorporate the full-scale depth required to integrate the draft trading process into a decentralized user platform and experience.

Cutting time for the trade negotiation process buys decision time for team decision-makers. Gains are also made with accuracy and cost.

Full-scale adoption may find resistance due to the level of fan involvement; the draft has evolved into an interactive experience for both fans and teams.

This research demonstrates the new application of smart contracts in the inter-section of sports management and blockchain technology.

Measuring shared value (SV) created in innovation ecosystems (IEs) is increasingly relevant but complex, given the multidimensional and multiactor nature of both concepts, which challenges traditional performance measurement systems (PMSs). Moving from this gap, the authors propose an integrated approach to extend the balanced scorecard (BSC) for measuring and monitoring SV creation at IE level.

The proposed approach combines the most recent contributions on PMS in IEs and SV to define perspectives and dimensions that are better suited to deal with the nature of both IEs and SV. The approach is also applied to the real case (Alpha) of an Italian IE through a step wise method. Starting from the IE vision, the authors identify in the strategy map the specific objectives related to each perspective/dimension combination and then associate a performance indicator with each objective.

The resulting SV BSC is composed of indicators interconnected along different perspectives and dimensions. The application of the approach to the real case proves its feasibility and highlights characteristics, advantages and disadvantages of the SV BSC when used at IE level. The authors also provide guidelines for its application to other IEs.

The study contributes to the research on PMS by introducing and applying to a real case an integrated approach to assess SV in IEs, overcoming the shortcomings of PMS framed for single firms. It can be of interest for both researchers in the field of ecosystems value creation and practitioners managing or promoting such complex structures.

Selective laser sintering (SLS) is an essential technology in the field of additive manufacturing. However, SLS technology is limited by the traditional point-laser sintering method and has reached the bottleneck of efficiency improvement. This study aims to develop an image-shaped laser sintering (ISLS) system based on a digital micromirror device (DMD) to address this problem. The ISLS system uses an image-shaped laser light source with a size of 16 mm × 25.6 mm instead of the traditional SLS point-laser light source.

The ISLS system achieves large-area image-shaped sintering of polymer powder materials by moving the laser light source continuously in the x-direction and updating the sintering pattern synchronously, as well as by overlapping the splicing of adjacent sintering areas in the y-direction. A low-cost composite powder suitable for the ISLS system was prepared using polyether sulfone (PES), pinewood and carbon black (CB) powders as raw materials. Large-sized samples were fabricated using composite powder, and the microstructure, dimensional accuracy, geometric deviation, density, mechanical properties and feasible feature sizes were evaluated.

The experimental results demonstrate that the ISLS system is feasible and can print large-sized parts with good dimensional accuracy, acceptable geometric deviations, specific small-scale features and certain density and mechanical properties.

This study has achieved the transition from traditional point sintering mode to image-shaped surface sintering mode. It has provided a new approach to enhance the system performance of traditional SLS.

Jubail Industrial City is one of the largest industrial centers in the Middle East, offering potential opportunities for renewable energy generation. This research paper presents a comprehensive analysis of the wind resources in Jubail Industrial City and proposes the design of a smart grid-connected wind farm for this strategic location.

The study used wind data collected at three different heights above ground level – 10, 50 and 90 m – over four years from 2017 to 2020. Key parameters, such as average wind speeds (WS), predominant wind direction, Weibull shape, scale parameters and wind power density (WPD), were analyzed. The study used Windographer, an exclusive software program designed to evaluate wind resources.

The average WS at the respective heights were 3.07, 4.29 and 4.58 m/s. The predominant wind direction was from the north-west. The Weibull shape parameter (k) at the three heights was 1.77, 2.15 and 2.01, while the scale parameter (c) was 3.36, 4.88 and 5.33 m/s. The WPD values at different heights were 17.9, 48.8 and 59.3 W/m², respectively.

The findings suggest that Jubail Industrial City possesses favorable wind resources for wind energy generation. The proposed smart grid-connected wind farm design demonstrates the feasibility of harnessing wind power in the region, contributing to sustainable energy production and economic benefits.