Search results

First is to develop the time truncated median control chart for the Rayleigh distribution (RD) and generalized RD (GRD), respectively. Second is to evaluate the performance of the proposed attribute control chart which depends on the average run length (ARL) and third is to include real life examples for application purpose of the proposed attribute control chart.

(1) Select a random sample of size n from each subgroup from the production process and put them on a test for specified time t, where t = ? × µe. Then, count the numbers of failed items in each subgroup up to time t. (2) Step 2: Using np chart, define D = np, the number of failures, which also a random variable follows the Binomial distribution. It is better to use D = np chart rather than p chart because the authors are using number of failure rather than proportion of failure p. When the process is in control, then the parameters of the binomial distribution are n and p0, respectively. (3) Step 3: The process is said to be in control if LCL = D = UCL; otherwise, the process is said to be out of control. Hence, LCL and UCL for the proposed control chart.

From the findings, it is concluded that the GRD has smaller ARL values than the RD for specified values of parameters, which indicate that GRD performing well for out of control signal as compared to the RD.

This developed control chart is applicable when real life situation coincide with RD and GRD.

Researcher can directly use presented study and save consumers from accepting bad lot and also encourage producers to make good quality products so that society can take benefit from their products.

This article dealt with time truncated attribute median control chart for non-normal distributions, namely, the RD and GRD, respectively. The structure of the proposed control chart is developed based on median lifetime of the RD and GRD, respectively.

In vehicular ad hoc networks (VANETs), the information transmitted is broadcast in a free access environment. Therefore, VANETs are vulnerable against attacks that can directly perturb the performance of the networks and then provoke big fall of capability. Black hole attack is an example such attack, where the attacker node pretends that having the shortest path to the destination node and then drops the packets. This paper aims to present a new method to detect the black hole attack in real-time in a VANET network.

This method is based on capability indicators that are widely used in industrial production processes. If the different capability indicators are greater than 1.33 and the stability ratio (S_r) is greater than 75%, the network is stable and the vehicles are communicating in an environment without the black hole attack. When the malicious nodes representing the black hole attacks are activated one by one, the fall of capability becomes more visible and the network is unstable, out of control and unmanaged, due to the presence of the attacks. The simulations were conducted using NS-3 for the network simulation and simulation of urban mobility for generating the mobility model.

The proposed mechanism does not impose significant overheads or extensive modifications in the standard Institute of Electrical and Electronics Engineers 802.11p or in the routing protocols. In addition, it can be implemented at any receiving node which allows identifying malicious nodes in real-time. The simulation results demonstrated the effectiveness of proposed scheme to detect the impact of the attack very early, especially with the use of the short-term capability indicators (Cp, Cpk and Cpm) of each performance metrics (throughput and packet loss ratio), which are more efficient at detecting quickly and very early the small deviations over a very short time. This study also calculated another indicator of network stability which is S_r, which allows to make a final decision if the network is under control and that the vehicles are communicating in an environment without the black hole attack.

According to the best of the authors’ knowledge, the method, using capability indicators for detecting the black hole attack in VANETs, has not been presented previously in the literature.

This study aims to utilise Six Sigma in an Irish-based red meat processor to reduce process variability and improve yields.

This is a case study within an Irish meat processor where the structured Define, Measure, Analyse, Improve and Control (DMAIC) methodology was utilised along with statistical analysis to highlight areas of the meat boning process to improve.

The project led to using Six Sigma to identify and measure areas of process variation. This resulted in eliminating over-trimming of meat cuts, improving process capabilities, increasing revenue and reducing meat wastage. In addition, key performance indicators and control charts, meat-cutting templates and smart cutting lasers were implemented.

The study is one of Irish meat processors' first Six Sigma applications. The wider food and meat processing industries can leverage the learnings to understand, measure and minimise variation to enhance revenue.

Organisations can use this study to understand the benefits of adopting Six Sigma, particularly in the food industry and how measuring process variation can affect quality.

This is the first practical case study on Six sigma deployment in an Irish meat processor, and the study can be used to benchmark how Six Sigma tools can aid in understanding variation, thus benefiting key performance metrics.

The purpose of this study is to implement lean six sigma (LSS) methodology to improve the admission process in a higher education institute (HEI).

In this study, case study research methodology is adopted and implemented through an LSS define-measure-analyze-improve-control (DMAIC) framework.

The preliminary investigation showed that the completion of the whole admission process of a new student takes an average of 88 min, which is equivalent to a sigma level of about 0.71 based on the targeted admission cycle time of 60 min. The implementation of the proposed LSS approach increased the sigma level from 0.71 to 2.57, which indicates a reduction in the mean admission cycle time by around 55%. This substantial improvement is expected not only to provide an efficient admission process but also to enhance the satisfaction of students and employees and increase the reputation of the HEI to a significant level.

In this study, the sample size used in the analysis is considered small. In addition, the effectiveness of the proposed approach is investigated using a discrete event simulation with a single-case study, which may limit generalization of the results. However, this study can provide useful guidance for further research for the generalization of the results to wider scopes in terms of different sectors of HEIs and geographical locations.

This study uses several statistical process control tools and techniques through a LSS DMAIC framework to identify and element the root causes of the long admission cycle time at a HEI. The approach followed, and the lessons learned, as documented in the study, can be of a great benefit in improving different sectors of HEIs.

This study is one of the few attempts to implement LSS in HEIs to improve the administrative process so that better-quality services can be provided to customers, such as students and guardians. The project is implemented by a group of undergraduate students as a part of their senior design project, which paves the way for involving students in future LSS projects in HEIs. This study is expected to help to improve understanding of how LSS methodology can be implemented in solving quality-related problems in HEIs and to offer valuable insights for both academics and practitioners.

This article aims to optimise energy use and consumption by integrating Lean Six Sigma methodology with the ISO 50001 energy management system standard in an Irish dairy plant operation.

This work utilised Lean Six Sigma methodology to identify methods to measure and optimise energy consumption. The authors use a single descriptive case study in an Irish dairy as the methodology to explain how DMAIC was applied to reduce energy consumption.

The replacement of heavy oil with liquid natural gas in combination with the new design of steam boilers led to a CO₂ footprint reduction of almost 50%.

A further longitudinal study would be useful to measure and monitor the energy management system progress and carry out more case studies on LSS integration with energy management systems across the dairy industry.

The novelty of this study is the application of LSS in the dairy sector as an enabler of a greater energy-efficient facility, as well as the testing of the DMAIC approach to meet a key objective for ISO 50001 accreditation.

This paper aims to explore a framework for implementing Lean Construction (LC) to provide corrective actions for quality defects, customer dissatisfaction and value creation during the construction of megaprojects.

This paper presents a case study involving the construction of the Mohamed VI Tower in Morocco. It is the tallest tower in Africa, with 55 floors and a total height of 250 m. This study of the quality of the work and the involvement of the LC was carried out using the Define–Measure–Analysis–Improve–Control approach from Lean six sigma. It describes the Critical to Quality and analyses the root causes of quality defects, customer dissatisfaction and variation in the quality process.

Firstly, the results of this study map the causal factors of lack of quality as established in the literature. Secondly, the LC tools have reduced non-value-added sources of quality waste and, consequently, improved critical quality indicators.

This document focuses on one part of the tower’s construction and is limited to a project case in a country where LC is rarely used.

This study reinforces the literature reviews, surveys and the small number of case studies that have validated the potential of LC and further clarifies future directions for the practical emergence of this quality improvement approach, especially for large-scale projects.

To achieve changing customer demands, organizations are striving hard to embrace cutting-edge technologies facilitating a high level of customization. Industry 4.0 (I4.0) implementation aids in handling big data that could help generate customized products. Lean six sigma (LSS) depends on data analysis to execute complex problems. Hence, the present study aims to empirically examine the key operational characteristics of LSS and I4.0 integration such as principles, workforce skills, critical success factors, challenges, LSS tools, I4.0 technologies and performance measures.

To stay competitive in the market and quickly respond to market demands, industries need to go ahead with digital transformation. I4.0 enables building intelligent factories by creating smart manufacturing systems comprising machines, operators and information and communication technologies through the complete value chain. This study utilizes an online survey on Operational Excellence professionals (Lean/Six Sigma), Managers/Consultants, Managing Directors/Executive Directors, Specialists/Analysts/Engineers, CEO/COO/CIO, SVP/VP/AVP, Industry 4.0 professionals and others working in the field of I4.0 and LSS. In total, 83 respondents participated in the study.

Based on the responses received, reliability, exploratory factor analysis and non-response bias analysis were carried out to understand the biasness of the responses. Further, the top five operational characteristics were reported for LSS and I4.0 integration.

One of the limitations of the study is the sample size. Since I4.0 is a new concept and its integration with LSS is not yet explored; it was difficult to achieve a large sample size.

Organizations can utilize the study findings to realize the top principles, workforce skills, critical success factors, challenges, LSS tools, I4.0 tools and performance measures with respect to LSS and I4.0 integration. Moreover, these operational characteristics will help to assess the organization's readiness before and after the implementation of this integration.

The authors' original contribution is the empirical investigation of operational characteristics responsible for I4.0 and LSS integration.

Adverse events in health care became more evident at the beginning of the 21st century, being an emerging problem worldwide and impacting the lives of people receiving health care, contributing to preventable injuries and deaths. This evidence has motivated the development of specific training in the area of patient safety with a strong focus on the education and training of health professionals, and, more recently, it also aimed at patient, informal caregiver and all citizens. In this sense, the use of digital technology for patient safety training has been an important challenge and proves to be a good solution for training and continuous learning, both for professionals and people in general. The use of multimedia, videos, games, simulators, among others, are effectively essential resources to improve people’s health literacy and safety of care.

This chapter presents a narrative review on patient safety training and the contributions of digital technology. The experience report will also be used, presenting some examples of quality improvement projects developed by Portuguese and Brazilian entities, in training contexts, highlighting the importance of investing in the health literacy of professionals, patients/informal caregivers and civil society, through applying specific techniques and using digital technology.

Effective total quality management (TQM) practices rely on the accurate classification of critical success factors (CSFs). The impact matrix cross-reference multiplication technique for classification (MICMAC) or/and fuzzy MICMAC (FMICMAC) can be used to identify key factors in the complex set. However, TQM includes both “hard” and “soft” factors, limiting application of the traditional MICMAC/FMICMAC method.

Previous literature on TQM was reviewed, CSFs were identified, and factors were sorted into soft and hard categories. The combined fuzzy integration and dual-aspect MICMAC (fuzzy dual-aspect MICMAC approach) was then applied to identify, cluster and prioritize the CSFs of TQM.

A total of 20 factors (10 soft and 10 hard) were identified and isolated to assess the manufacturing- and service-related TQM practices of the Pearl River Delta Region of China. Seven driver factors and one linkage factor emerged as the key CSFs that managers should prioritize.

A major limitation of this study is the dependency of the results on the definitions of linguistic labels. If the linguistic definitions of TQM CSFs do not closely correspond to the expert opinion data, then the analysis results may be inaccurate. Additionally, although expert opinions are utilized in the proposed method for comprehensive assessments, these opinions may influence the final results due to their inherent subjectivity.

A novel fuzzy dual-aspect MICMAC approach was developed to identify and classify CSFs for optimal TQM practices. This approach allows clustering of CSFs so that decision-makers can prioritize factors according to their dependence and driving powers. Practitioners should concentrate on the CSFs with higher driving powers for successful TQM.

Interrelationships among some common factors of human resource (HR) management and quality management are still unexplored. Changes in work patterns due to the Covid-19 pandemic have aroused interest in some of these factors, such as working-hours, work pressure, work–life balance practices, job satisfaction. The purpose of this study is to explore the interrelationships among such factors. Specifically, the influence of work hours, work pressure, job rotation and work–life balance on job satisfaction is evaluated both directly and under the mediating influence of working conditions.

A questionnaire-based survey was conducted in Indonesia among diversified organisations. A total of 432 responses were gathered, and they were examined using hypothesis testing and partial least square based structural equation modelling.

The study confirms the statistically proven impact of work pressure, job rotations and work–life-balance practices on working conditions. Job rotations, work–life balance practices and working conditions directly influenced job satisfaction. Work pressure did not influence job satisfaction directly, but it significantly influenced working conditions, which eventually affected job satisfaction. Working hours neither affected working conditions nor job satisfaction in a significant manner.

Covid-19 necessitated working from home, which is a peculiar work–life balance situation. The findings are helpful for organisations in planning strategies related to work–life-balance, working hours, multi-skilling, working conditions and other quality of work life factors in both regular working conditions and under Covid-19 conditions.

The proven influence of work pressure and work–life-balance practices may result in the formation of informal organisations, social groups and increased social networking. As working hours are not diagnosed as an influencing factor for job satisfaction, organisations may think about increasing them, affecting the social fabric of the working community.

Previously unexplored interrelationships among various quality of work life factors are established. Under Covid-19 circumstances, factors such as working hours, work–life-balance and work pressure are investigated in a novel manner. The factors and their interrelationships are important to both quality management professionals and HR professionals.