Search results

To simplify the circuit design and control complexity of the magnetic coupling resonant wireless charging system, the radio energy transmission constant current and constant voltage charging is realized.

The purpose of this study is to simplify the circuit design and control complexity of the magnetic coupling resonance wireless charging system, in order to achieve constant current and constant voltage charging for wireless energy transmission. First, the principle of LCC/S-S compensation structure is analyzed, and the equivalent mathematical model is established; then, the system characteristics under constant current and constant voltage mode are analyzed, and the design method of system parameters is given; finally, a simulation and experimental system is built to verify the correctness and feasibility of the theoretical analysis.

The results show that the proposed hybrid topology can achieve a constant current output of 2 A and a constant voltage output of 30 V under variable load conditions, and effectively suppress the current distortion problem under light load conditions. The waveform distortion rate of the inverter current is reduced from 33.97% to 10.45%.

By changing the high-order impedance characteristics of the compensation structure, the distortion of the current waveform under light load is suppressed, and the overall stability and efficiency of the system are improved.

This chapter provides an empirical assessment of the effects of infrastructure provision on structural change and aggregate productivity using industrylevel data for a set of developed and developing countries over 1995–2010. A distinctive feature of the empirical strategy followed is that it allows the measurement of the resource reallocation directly attributable to infrastructure provision. To achieve this, a two-level top-down decomposition of aggregate productivity that combines and extends several strands of the literature is proposed. The empirical application reveals significant production losses attributable to misallocation of inputs across firms, especially among African countries. Also, the results show that infrastructure provision has stimulated aggregate total factor productivity growth through both within and between industry productivity gains.

This study aims to undertake a comprehensive examination of heat transfer by convection in porous systems with top and bottom walls insulated and differently heated vertical walls under a magnetic field. For a specific nanofluid, the study aims to bring out the effects of different segmental heating arrangements.

An existing in-house code based on the finite volume method has provided the numerical solution of the coupled nondimensional transport equations. Following a validation study, different explorations include the variations of Darcy–Rayleigh number (Ra_m = 10–10⁴), Darcy number (Da = 10^–5–10^–1) segmented arrangements of heaters of identical total length, porosity index (ε = 0.1–1) and aspect ratio of the cavity (AR = 0.25–2) under Hartmann number (Ha = 10–70) and volume fraction of φ = 0.1% for the nanoparticles. In the analysis, there are major roles of the streamlines, isotherms and heatlines on the vertical mid-plane of the cavity and the profiles of the flow velocity and temperature on the central line of the section.

The finding of a monotonic rise in the heat transfer rate with an increase in Ra_m from 10 to 10⁴ has prompted a further comparison of the rate at Ra_m equal to 10⁴ with the total length of the heaters kept constant in all the cases. With respect to uniform heating of one entire wall, the study reveals a significant advantage of 246% rate enhancement from two equal heater segments placed centrally on opposite walls. This rate has emerged higher by 82% and 249%, respectively, with both the segments placed at the top and one at the bottom and one at the top. An increase in the number of centrally arranged heaters on each wall from one to five has yielded 286% rate enhancement. Changes in the ratio of the cavity height-to-length from 1.0 to 0.2 and 2 cause the rate to decrease by 50% and increase by 21%, respectively.

Further research with additional parameters, geometries and configurations will consolidate the understanding. Experimental validation can complement the numerical simulations presented in this study.

This research contributes to the field by integrating segmented heating, magnetic fields and hybrid nanofluid in a porous flow domain, addressing existing research gaps. The findings provide valuable insights for enhancing thermal performance, and controlling heat transfer locally, and have implications for medical treatments, thermal management systems and related fields. The research opens up new possibilities for precise thermal management and offers directions for future investigations.

This paper aims to establish a lattice Boltzmann (LB) method for solid-liquid phase transition (SLPT) from the pore scale to the representative elementary volume (REV) scale. By applying this method, detailed information about heat transfer and phase change processes within the pores can be obtained, while also enabling the calculation of larger-scale SLPT problems, such as shell-and-tube phase change heat storage systems.

Three-dimensional (3D) pore-scale enthalpy-based LB model is developed. The computational input parameters at the REV scale are derived from calculations at the pore scale, ensuring consistency between the two scales. The approaches to reconstruct the 3D porous structure and determine the REV of metal foam were discussed. The implementation of conjugate heat transfer between the solid matrix and the solid−liquid phase change material (SLPCM) for the proposed model is developed. A simple REV-scale LB model under the local thermal nonequilibrium condition is presented. The method of bridging the gap between the pore-scale and REV-scale enthalpy-based LB models by the REV is given.

This coupled method facilitates detailed simulations of flow, heat transfer and phase change within pores. The approach holds promise for multiscale calculations in latent heat storage devices with porous structures. The SLPT of the heat sinks for electronic device thermal control was simulated as a case, demonstrating the efficiency of the present models in designing and optimizing SLPT devices.

A coupled pore-scale and REV-scale LB method as a numerical tool for investigating phase change in porous materials was developed. This innovative approach allows for the capture of details within pores while addressing computations over a large domain. The LB method for simulating SLPT from the pore scale to the REV scale was given. The proposed method addresses the conjugate heat transfer between the SLPCM and the solid matrix in the enthalpy-based LB model.

This study aims to explore how coping strategies (CS) mediate the relationship between job insecurity (JI) and subjective well-being (SWB) leading to presenteeism among millennials. This study has been tested based on the conservation of resources theory (Hobfoll, 2001) and the transactional theory of stress and coping (Lazarus and Folkman, 1984). In India, employees in the information technology (IT) and business process management sectors have been facing increased job insecurity over the last couple of years. The advent of technology has increased job insecurity among millennials, specifically in the IT sector. The Indian IT and information technology–enabled service (ITES) sector witnessed mass retrenchments by companies in 2016–2017. Instead of reskilling, the companies decided to lay off their employees. During the pandemic, the IT and ITES industries witnessed a massive culture shift in terms of technology and work engagement. Postpandemic, the recession is looming large on these industries. In 2022, tech layoffs have witnessed 135,000 employees impacted globally and many may lose their job in the coming year. This study chose Indian millennials because they form a large part of the Indian workforce, especially in the IT and ITES sector.

In this study, cross-sectional design is used where different individuals are part of the study at the same point in time. A sequential mixed method of research is adopted for this study, owing to the kind of research questions and the requirement to include critical realism. A qualitative study was carried out post the quantitative study, to corroborate the results from the quantitative study. Quantitative methodologies address questions about causality, generalizability or magnitude of outcome, whereas qualitative research methodologies explore why or how a phenomenon occurs, describe the nature of an individual’s experience during the study relevant to the context and/or develop a theory (Fetters et al., 2013). Because the study is about the millennial workforce in IT and the ITES sectors, the sample population comprised employees in Delhi and the national capital region (NCR) of Delhi in northern India. Out of a total of 374 ITES companies listed in the national association of software and service companies (2018), 103 are based out of Delhi/NCR; hence, companies from Delhi/NCR were chosen for the study. The other reason for opting for companies based in Delhi/NCR was that many millennials from second- and third-tier cities also are employed in these companies bringing in varied cultural perspectives. This study included 588 employees working in ITES organizations based in the National Capital Region of India. Mediation analysis for statistical verification was carried out with regression-based analysis in SPSS macro process (version 4).

The impact of job insecurity on the positive and negative affects of the subjective well-being of millennials was found to be substantial. Coping strategies moderated the relationship and it was seen that both engaged and disengaged strategies of coping had an impact on the positive affect of subjective well-being but did not have any impact on the negative affect of subjective well-being. The positive affect of subjective well-being was negatively related to presenteeism, and the negative affect of subjective well-being was positively related to presenteeism.

This study is carried out only in the ITES industry and on millennials. With the advent of technology, other industries are going through challenges concerning layoffs even though the severity of the same might be less. In times to come, for strategizing employee engagement, it is necessary to understand how the workforce copes with various work-related stress factors. The positive affects and negative affects of well-being and responses have been studied from an employee perspective only. Further research should be conducted to explore responses from both employers and employees to establish presenteeism and the antecedents of presenteeism in conjunction with positive and negative affects of well-being. There is further scope to study the impact of job insecurity on adaptive presenteeism in older generations and various industries given the current job scenario and talent-reskilling issues.

This study brings forth original insights into the impact of constant job threats on millennials employed in the IT and/or IT service sectors. The key findings contribute to literature knowledge and help managers recognize the unfavorable consequences of continuous job threats on the well-being of employees. There is an immediate need for managers to recognize the problem and devise various policies and communication strategies to enable millennial employees to cope with the constant changes in the organization, owing to various technological, political and environmental factors. Organizations should be mindful of this impact, which can subsequently have serious consequences on the productivity of the employees, resulting in decreased overall performance and health of the organization.

This study of job insecurity as a job stressor, triggering coping strategies in Indian millennials working in the ITES and IT industry, presents original insights. This study explores and presents how the impact of job insecurity may increase presenteeism as a result of coping. This study brings value to practitioners and this study may help organizations improve the overall well-being of their employees, thus improving productivity. On the contrary, it also opens opportunities for exploring the impact of job insecurity as a challenge stressor.

This paper aims at studying numerically the entropy generation of nanofluid flowing over an inclined sheet in the presence of external magnetic field, heat source/sink, chemical reaction along with slip boundary conditions imposed on an impermeable wall.

A suitable similarity transformation technique has been used to convert the coupled nonlinear partial differential equations to ordinary differential equations (ODEs). The ODEs are then solved simultaneously using the finite difference method implemented through an in-house computer program. The effects of different controlling parameters such as magnetic parameter, radiation parameter, Brownian motion parameter, thermophoresis parameter, chemical reaction parameter, Reynolds number, Brinkmann number, Prandtl number, velocity slip parameter, temperature slip parameter and the concentration slip parameter on the entropy generation and Bejan number have been discussed comprehensively through the relevant physical insights for the first time.

The relative strengths of the irreversibilities due to heat transfer, fluid friction and the mass diffusion arising due to the change in each of the controlling variables have been delineated both in the near-wall and far-away-wall regions, which may be helpful for a better understanding of the thermo-fluid dynamics of nanofluid in boundary layer flows. The numerical results obtained from the present study have also been validated with results published in open literature.

The effects of different controlling parameters such as magnetic parameter, radiation parameter, Brownian motion parameter, thermophoresis parameter, chemical reaction parameter, Reynolds number, Brinkmann number, Prandtl number, velocity slip parameter, temperature slip parameter and the concentration slip parameter on the entropy generation and Bejan number have been discussed comprehensively through the relevant physical insights for the first time.

The purpose of this paper is to develop a coupled lattice Boltzmann model for the simulation of the freezing process in unsaturated porous media.

In the developed model, the porous structure with complexity and disorder was generated by using a stochastic growth method, and then the Shan-Chen multiphase model and enthalpy-based phase change model were coupled by introducing a freezing interface force to describe the variation of phase interface. The pore size of porous media in freezing process was considered as an influential factor to phase transition temperature, and the variation of the interfacial force formed with phase change on the interface was described.

The larger porosity (0.2 and 0.8) will enlarge the unfrozen area from 42 mm to 70 mm, and the rest space of porous medium was occupied by the solid particles. The larger specific surface area (0.168 and 0.315) has a more fluctuated volume fraction distribution.

The concept of interfacial force was first introduced in the solid–liquid phase transition to describe the freezing process of frozen soil, enabling the formulation of a distribution equation based on enthalpy to depict the changes in the water film. The increased interfacial force serves to diminish ice formation and effectively absorb air during the freezing process. A greater surface area enhances the ability to counteract liquid migration.

Using a GED-GARCH model to estimate monthly data from January 1990 to February 2022, we test whether gold acts as a hedge or safe haven asset in 10 countries. With a downturn of the stock market, gold can be viewed as a hedge and safe haven asset in the G7 countries. In the case of inflation, gold acts as a hedge and safe haven asset in the United States, United Kingdom, Canada, China, and Indonesia. For currency depreciation, oil price shock, economic policy uncertainty, and US volatility spillover, evidence finds that gold acts as a hedge and safe haven for all countries.

The article aims to establish whether the degree of aversion to inflation and the responsiveness to deviations from potential output have changed over time.

This paper assesses time variation in monetary policy rules by applying a time-varying parameter generalised methods of moments (TVP-GMM) framework.

Using monthly data until December 2022 for five inflation targeting countries (the UK, Canada, Australia, New Zealand, Sweden) and five countries with alternative monetary regimes (the US, Japan, Denmark, the Euro Area, Switzerland), we find that monetary policy has become more averse to inflation and more responsive to the output gap in both sets of countries over time. In particular, there has been a clear shift in inflation targeting countries towards a more hawkish stance on inflation since the adoption of this regime and a greater response to both inflation and the output gap in most countries after the global financial crisis, which indicates a stronger reliance on monetary rules to stabilise the economy in recent years. It also appears that inflation targeting countries pay greater attention to the exchange rate pass-through channel when setting interest rates. Finally, monetary surprises do not seem to be an important determinant of the evolution over time of the Taylor rule parameters, which suggests a high degree of monetary policy transparency in the countries under examination.

It provides new evidence on changes over time in monetary policy rules.

This study aims to investigate the influence of wall curvature in a semicircular thermal annular system on magneto-nanofluidic flow, heat transfer and entropy generation. The analysis is conducted under constant cooling surface and fluid volume constraints.

The mathematical equations describing the thermo-fluid flow in the semicircular system are solved using the finite element technique. Four different heating wall configurations are considered, varying the undulation numbers of the heated wall. Parametric variations of bottom wall undulation (f), buoyancy force characterized by the Rayleigh number (Ra), magnetic field strength represented by the Hartmann number (Ha) and inclination of the magnetic field (γ) on the overall thermal performance are studied extensively.

This study reveals that the fluid circulation strength is maximum in the case of a flat bottom wall. The analysis shows that the bottom wall contour and other control parameters significantly influence fluid flow, entropy production and heat transfer. The modified heated wall with a single undulation exhibits the highest entropy production and thermal convection, leading to a heat transfer enhancement of up to 21.85% compared to a flat bottom. The magnetic field intensity and orientation have a significant effect on heat transfer and irreversibility production.

Further research can explore a wider range of parameter values, alternative heating wall profiles and boundary conditions to expand the understanding of magneto-nanofluidic flow in semicircular thermal systems.

This study introduces a constraint-based analysis of magneto-nanofluidic thermal behavior in a complex semicircular thermal system, providing insights into the impact of wall curvature on heat transfer performance. The findings contribute to the design and optimization of thermal systems in various applications.