Search results

This study investigates the impact of the fire decay phase on structural damage using the sectional analysis method. The primary objective of this work is to forecast the non-dimensional capacity parameters for the axial and flexural load-carrying capacity of reinforced concrete (RC) sections for heating and the subsequent post-heating phase (decay phase) of the fire.

The sectional analysis method is used to determine the moment and axial capacities. The findings of sectional analysis and heat transfer for the heating stage are initially validated, and the analysis subsequently proceeds to determine the load capacity during the fire’s heating and decay phases by appropriately incorporating non-dimensional sectional and material parameters. The numerical analysis includes four fire curves with different cooling rates and steel percentages.

The study’s findings indicate that the rate at which the cooling process occurs after undergoing heating substantially impacts the axial and flexural capacity. The maximum degradation in axial and flexural capacity occurred in the range of 15–20% for cooling rates of 3 °C/min and 5 °C/min as compared to the capacity obtained at 120 min of heating for all steel percentages. As the fire cooling rate reduced to 1 °C/min, the highest deterioration in axial and flexural capacity reached 48–50% and 42–46%, respectively, in the post-heating stage.

The established non-dimensional parameters for axial and flexural capacity are limited to the analysed section in the study owing to the thermal profile, however, this can be modified depending on the section geometry and fire scenario.

The study primarily focusses on the degradation of axial and flexural capacity at various time intervals during the entire fire exposure, including heating and cooling. The findings obtained showed that following the completion of the fire’s heating phase, the structural capacity continued to decrease over the subsequent post-heating period. It is recommended that structural members' fire resistance designs encompass both the heating and cooling phases of a fire. Since the capacity degradation varies with fire duration, the conventional method is inadequate to design the load capacity for appropriate fire safety. Therefore, it is essential to adopt a performance-based approach while designing structural elements' capacity for the desired fire resistance rating. The proposed technique of using non-dimensional parameters will effectively support predicting the load capacity for required fire resistance.

The fire-resistant requirements for reinforced concrete structures are generally established based on standard fire exposure conditions, which account for the fire growth phase. However, it is important to note that concrete structures can experience internal damage over time during the decay phase of fires, which can be quantitatively determined using the proposed non-dimensional parameter approach.

Front-line lean leadership is critical for implementing and sustaining lean production systems (LPS). The purpose of this paper is to analyze the relationships between front-line lean leader (FLL) capacities (cognitive, social, motivational, knowledge and experience), lean leader practices (developing people and supporting daily kaizen) and the degree of implementation of lean tools (pull system, involvement of employees and process control) in manufacturing companies.

A survey was conducted with FLLs from large Brazilian manufacturing companies. The survey collected 103 responses, 99 of which were validated. Data were analyzed using partial least squares structural equation modeling.

There was a positive, significant and direct relationship between FLL capacities, leadership practices and a degree of implementation of LPS tools on the shop floor. The validated model is a reference base for planning FLL capacities and practices that result in more effectively implementing LPS on the shop floor.

The findings provide managers with a new perspective on the importance of the development and training of FLLs focusing on leadership capacities. As decisions about developing lean capabilities impact the application of Lean leadership practices and the use of lean tools, they are also related to day-to-day lean activities and improved operational results. Additionally, the proposed model can be used by managers as a basis to diagnose, develop and select lean leaders.

This study seeks to fill a theoretical gap of knowledge on front-line lean leadership as it jointly addresses and empirically analyzes the existing relationships between lean leadership capacities, encompassing the perspective of psychology, lean practices and tools on the shop floor.

The purpose of this paper is to empirically investigate the impact of organizational intellectual capital (IC) components on absorptive capacity (ACAP) such as potential absorptive capacity (PACAP) and realized absorptive capacity (RACAP). Furthermore, it attempts to investigate the mechanism through which PACAP and RACAP jointly influence innovation strategies (i.e.) exploitative and exploratory innovations.

This is an explanatory research using a deductive approach. This study uses survey data from 184 manufacturing export firms analyzed through partial least squares structural equation modelling.

The results have found that the cognitive and social capital of a firm positively affects PACAP and RACAP, whereas relational capital has a significant effect on RACAP. Moreover, the study reveals that both potential and realized absorptive capacities considerably lead to the development of organizational exploitative and exploratory innovation strategies.

The research focused on two driving factors, i.e. IC components and ACAP dimensions, and overlooked how each component of IC and ACAP influences ambidextrous innovative strategy.

Providing managers with insights about the critical role of developing IC to facilitate the transfer and exchange of crucial absorptive capacity necessary for ambidextrous innovative strategy.

This study makes a significant contribution to the existing literature by highlighting the importance of ACAP and provides useful insights for firms in developing economies to improve their exploitative and exploratory innovation capability. This study likewise reveals the significance of the four dimensions of IC, which can facilitate bringing in knowledge from developing economies.

This study aims to investigate the relationship between absorptive capacity, relational capital and interorganizational relationship performance and examine the moderating effect of contractual governance on this relationship.

This study used a quantitative design, analyzing data collected through a survey questionnaire. The sampling frame consisted of 111 cross-industry, small and medium-sized manufacturers in Malaysia. The research model was analyzed using structural equation modeling.

The results show that interorganizational relationship performance is positively influenced by relational capital and absorptive capacity. While absorptive capacity has a positive effect on relational capital, this study finds empirical evidence that contractual governance weakens the effect of absorptive capacity on relational capital. Furthermore, this study also examines the hitherto under-researched moderating effect of contractual government on absorptive capacity and relational capital and their relationship with interorganizational relationship performance.

This study provides insights into the interorganizational relationship among SMEs and explains the nature of knowledge management in this context. This study shows the potential role of absorptive capacity in building close cross-border interorganizational relationships.

The purpose of this study is to investigate the impact of rapid internationalization by emerging-market multinational enterprises (EMNEs) on their innovation performance. It also seeks to identify any potential moderating factors that could influence this relationship.

By analyzing data from listed Chinese MNEs from 2012 to 2022, this study applies a negative binomial regression model to test the research hypotheses.

This study uncovers an inverted U-shaped relationship between the internationalization speed of EMNEs and their innovation performance. It also suggests that strong absorptive, learning and managerial capacities could play positive moderating roles in the effect of internationalization speed on EMNEs’ innovation performance.

This study highlights rapid global expansion, promoting new knowledge acquisition for EMNEs. However, due to time-compression dilemmas with limited EMNE firm-specific advantages, overly accelerated internationalization hinders learning effectiveness. Additionally, this study reveals the critical importance of three firm-specific capacities in EMNEs – absorptive, learning and managerial capacities – in efficiently assimilating newly acquired knowledge from foreign markets and enhancing their innovation performance through rapid internationalization.

This study aims to explore how the absorptive capacity of emerging market multinationals (EMNEs) facilitates increased acquirer performance in industry exploration and technology exploration cross-border acquisitions (CBAs).

The research context for this study is Brazilian EMNEs and their CBAs. The final database contains 101 CBAs.

The authors find that industry exploration strategies negatively affect financial performance, but technology exploration strategies have a positive effect. The acquirer’s absorptive capacity can exacerbate the negative effects, except in instances of technology exploration strategies, where there is a demonstrable benefit from the acquirer’s absorptive capacity.

The study contributes first by providing a more nuanced understanding of the effects of absorptive capacity on postacquisition performance, depending on the type of knowledge explored. Second, by drawing on EMNE learning perspectives, the authors demonstrate the versatility of absorptive capacity in emerging markets.

This paper aims to study the joint decision making of advance selling and service cancelation for service provides with limited capacity when consumers are overconfident.

For the case in which consumers encounter uncertainties about product valuation and consumption states in the advance period and are overconfident about the probability of a good state, we study how the service provider chooses the optimal sales strategy among the non-advance selling strategy, the advance selling and disallowing cancelation strategy, and the advance selling and allowing cancelation strategy. We also discuss how overconfidence influences the service provider’s decision making.

The results show that when service capacity is sufficient, the service provider should adopt advance selling and disallow cancelation; when service capacity is insufficient, the service provider should still implement advance selling but allow cancelation; and when service capacity is extremely insufficient, the service provider should offer spot sales. Moreover, overconfidence weakens the necessity to allow cancelation under sufficient service capacity and enhances it under insufficient service capacity but is always advantageous to advance selling.

The obtained results provide managerial insights for service providers to make advance selling decisions.

This paper is among the first to explore the effect of consumers’ overconfidence on the joint decision of advance selling and service cancelation under capacity constraints.

This chapter aims to discuss the challenges facing these countries building productive capacity for development. This chapter makes use of data published by international organizations as indicators for measuring the state of development in the Arab region. Several indicators are presented to compare Arab countries with other world regions. The use of data identifies some of the gaps that countries in the Arab region need to close to strengthen capacity building for development and fostering economic growth. The findings from the data presented reveal that the productive structure in most Arab countries remains weak to generate production linkages and provide incentives for investment in nonenergy sectors. The failure of the export-led growth model to diversify output and promote development in energy producing countries has increased the dependence of these countries on global trade. Fluctuations in commodity prices and uncertainty about global demand for energy have influenced the ability of the state to construct strategies for rapid transformation. Except for the energy sector, the productivity of nonoil sectors remains low reflecting inadequate incentives and ineffective entrepreneurial capabilities. The study examines the challenges for building productive capacity in the Arab world. It illustrates the failure of the led-export model and its inability to prompted economic diversification, especially in the Gulf countries. The study contributes to the literature on capacity building in the Arab world so that to encourage researchers and students of development conducting studies concerning the main development challenges facing these countries.

Absorptive capacity, technological collaboration and servitization are analyzed to establish ways to overcome the balance between products and services in manufacturing companies. A fresh perspective is introduced by presenting a framework for innovation strategy, moving beyond product-based R&D.

The hypotheses are tested using data on Spanish firms in the high-tech chemical and pharmaceutical industries through ordinary least squares regression analysis. The sample consists of 112 manufacturing firms included in the Spanish Survey of Business Strategies.

The results show that absorptive capacity facilitates servitization and that technological collaboration moderates the relationship between absorptive capacity and servitization. The synergies between absorptive capacity and technological collaboration for servitization are recognized from the perspective of open innovation as a way of resolving the trade-off between products and services.

Future research should introduce more sources of collaboration by broadening the value chain perspective. Other approaches to innovation may also be considered, including relationships to process innovation.

The results can provide meaningful guidance for companies to determine the key opportunities of servitization driven by absorptive capacity, and the best ways to leverage open innovation and collaboration strategies to exploit such approaches.

This research enriches theories on servitization, open innovation and innovative behavior. Open innovation strategy should be linked to greater servitization activity and should support an open service strategy. This approach is crucial for building innovation capabilities through technological collaboration.

With the rapid development of the sharing economy in manufacturing industries, manufacturers and the equipment suppliers frequently share capacity through the third-party platform. This paper aims to study influences of manufacturers sharing capacity on the supplier and to analyze whether the supplier shares capacity as well as its influences.

This paper deals with conditions that the supplier and manufacturers share capacity through the third-party platform, and the third-party platform competes with the supplier in equipment sales. Considering the heterogeneity of the manufacturer's earning of unit capacity usage and the production efficiency of manufacturer's usage strategies, this paper constructs capacity sharing game models. Then, model equilibrium results under different sharing scenarios are compared.

The results show that when the production or maintenance cost is high, manufacturers sharing capacity simultaneously benefits the supplier, the third-party platform and manufacturers with high earnings of unit capacity usage. When both the rental efficiency and the production cost are low, or both the rental efficiency and the production cost are high, the supplier simultaneously sells equipment and shares capacity. The supplier only sells equipment in other cases. When both the rental efficiency and the production cost are low, the supplier’s sharing capacity realizes the win-win-win situation for the supplier, the third-party platform and manufacturers with moderate earnings of unit capacity usage.

This paper innovatively examines supplier's selling and sharing decisions considering manufacturers sharing capacity. It extends the research on capacity sharing and is important to supplier's operational decisions.