Search results

This pragmatic research paper aims to unravel the smart vision-based method (SVBM), an AI program to correlate the computer vision (recorded and live videos using mobile and embedded cameras) that aids in manual lifting human pose deduction, analysis and training in the construction sector.

Using a pragmatic approach combined with the literature review, this study discusses the SVBM. The research method includes a literature review followed by a pragmatic approach and lab validation of the acquired data. Adopting the practical approach, the authors of this article developed an SVBM, an AI program to correlate computer vision (recorded and live videos using mobile and embedded cameras).

Results show that SVBM observes the relevant events without additional attachments to the human body and compares them with the standard axis to identify abnormal postures using mobile and other cameras. Angles of critical nodal points are projected through human pose detection and calculating body part movement angles using a novel software program and mobile application. The SVBM demonstrates its ability to data capture and analysis in real-time and offline using videos recorded earlier and is validated for program coding and results repeatability.

Literature review methodology limitations include not keeping in phase with the most updated field knowledge. This limitation is offset by choosing the range for literature review within the last two decades. This literature review may not have captured all published articles because the restriction of database access and search was based only on English. Also, the authors may have omitted fruitful articles hiding in a less popular journal. These limitations are acknowledged. The critical limitation is that the trust, privacy and psychological issues are not addressed in SVBM, which is recognised. However, the benefits of SVBM naturally offset this limitation to being adopted practically.

The theoretical and practical implications include customised and individualistic prediction and preventing most posture-related hazardous behaviours before a critical injury happens. The theoretical implications include mimicking the human pose and lab-based analysis without attaching sensors that naturally alter the working poses. SVBM would help researchers develop more accurate data and theoretical models close to actuals.

By using SVBM, the possibility of early deduction and prevention of musculoskeletal disorders is high; the social implications include the benefits of being a healthier society and health concerned construction sector.

Human pose detection, especially joint angle calculation in a work environment, is crucial to early deduction of muscoloskeletal disorders. Conventional digital technology-based methods to detect pose flaws focus on location information from wearables and laboratory-controlled motion sensors. For the first time, this paper presents novel computer vision (recorded and live videos using mobile and embedded cameras) and digital image-related deep learning methods without attachment to the human body for manual handling pose deduction and analysis of angles, neckline and torso line in an actual construction work environment.

In recent years patents have become a very popular data source for forecasting technological changes. However, since a vast amount of patents are “worthless” (Moore, 2005), there is a need to identify the promising ones. For this purpose, previous approaches have mainly used bibliographic data, thus neglecting the benefits of textual data, such as instant accessibility at patent disclosure. To leverage these benefits, this study aims to develop an approach that uses textual patent data for predicting promising patents.

For the identification of promising patents, the authors propose a novel approach which combines link prediction with textual patent data. Thereby the authors are able to predict the emergence of hitherto unmentioned bigrams. By mapping these future bigrams to recent patents, the authors are able to distinguish between promising and nonpromising patents. To validate this approach, the authors apply the methodology to the case example of camera technology.

The authors identify stochastic gradient descent as a suitable algorithm with both a receiver operating characteristic area under curve score and a positive predictive value of 78%, which outperforms chance by a factor of two. In addition, the authors present promising camera patents for diverse application fields, such as cameras for surgical systems, cameras for rearview vision systems in vehicles or light amplification by stimulated emission of radiation detection and ranging cameras for three-dimensional imaging.

This study contributes in at least three directions to scholarship. First, the authors introduce a novel approach by combining link prediction with textual patent analysis and, in this way, leverage the benefits of both worlds. Second, the authors add to all theories that regard novel technologies as a recombination of existing technologies in presenting word combinations from textual data as a suitable instrument for revealing recombination in patents. And third, the approach can be used by scholars as a complementary or even integrative tool with conventional forecasting methods like the Delphi technique or Scenario planning.

At least three practical implications arise from the study. First, incumbent firms of a technology branch can use this approach as an early-warning system to identify technological change and to identify opportunities related to their company’s technological competence and provide inspiration for new ideas. Second, companies seeking to tap into new markets may also be interested in the approach as managers could anticipate whether their company’s technological competences are in line with upcoming trends. Third, the approach may be used as a supportive tool for various purposes, such as investment decisions or technology life cycle analysis.

The approach introduces textual patent data as suitable means for forecasting activities. As the statistical validation reveals, the promising patents identified by the approach are cited significantly more often than patents with less promising prospects.

An alliance portfolio can help latecomer firms to acquire the necessary knowledge and resources to catch up with market leaders. However, how latecomer firms construct an alliance portfolio in terms of the nature of windows of opportunity has not been fully analyzed. This paper aims to explore how latecomer firms can build appropriate coalitions according to the nature of the window of opportunity to achieve technological catch-up in different catch-up phases.

Based on a longitudinal case study from 1984 to 2018 of Sunny Group, now a leading manufacturer of integrated optical components and products, this paper explores the process of technological catch-up of latecomer firms building different types of alliance portfolio in different windows of opportunity.

This paper finds that there is a sequence when latecomers build an alliance portfolio in the process of catch-up. When the uncertainty of opportunity increases, the governance mechanism of the alliance portfolio will change from contractual to equity-based. Also, latecomer firms build market-dominated and technology-dominated alliance portfolios to overcome their market and technology disadvantages, respectively.

These conclusions not only enrich the theory of latecomer catch-up from the perspective of windows of opportunity but also expand research on alliance portfolio processes from a temporal perspective.

This paper aims to discuss the scanning methodology depending on the close-range photogrammetry technique, which is appropriate for the precise three-dimensional (3D) modelling of objects in millimetres, such as the dimensions and structures in sub-millimetre scale.

The camera was adjusted to be tilted around the horizontal axis, while coded dot targets were used to calibrate the digital camera. The experiment was repeated with different rotation angles (5°, 10°, 15°, 20°, 25°, 30°, 50° and 60°). The images were processed with the PhotoModeler software to create the 3D model of the sample and estimate its dimensions. The features of the sample were measured using high-resolution transmission electron microscopy, which has been considered as a reference and the comparative dimensions.

The results from the current study concluded that changing the rotation angle does not significantly affect the results, unless the angle of imagery is large which prevent achieving about 20: 30% overlap between the images but, the more angle decreases, the more number of images increase as well as the processing duration in the programme.

Develop an automatic appropriate for the precise 3D modelling of objects in millimetres, such as the dimensions and structures in sub-millimetre scale using photogrammetry.

The swivel construction method is a specially designed process used to build bridges that cross rivers, valleys, railroads and other obstacles. To carry out this construction method safely, real-time monitoring of the bridge rotation process is required to ensure a smooth swivel operation without collisions. However, the traditional means of monitoring using Electronic Total Station tools cannot realize real-time monitoring, and monitoring using motion sensors or GPS is cumbersome to use.

This study proposes a monitoring method based on a series of computer vision (CV) technologies, which can monitor the rotation angle, velocity and inclination angle of the swivel construction in real-time. First, three proposed CV algorithms was developed in a laboratory environment. The experimental tests were carried out on a bridge scale model to select the outperformed algorithms for rotation, velocity and inclination monitor, respectively, as the final monitoring method in proposed method. Then, the selected method was implemented to monitor an actual bridge during its swivel construction to verify the applicability.

In the laboratory study, the monitoring data measured with the selected monitoring algorithms was compared with those measured by an Electronic Total Station and the errors in terms of rotation angle, velocity and inclination angle, were 0.040%, 0.040%, and −0.454%, respectively, thus validating the accuracy of the proposed method. In the pilot actual application, the method was shown to be feasible in a real construction application.

In a well-controlled laboratory the optimal algorithms for bridge swivel construction are identified and in an actual project the proposed method is verified. The proposed CV method is complementary to the use of Electronic Total Station tools, motion sensors, and GPS for safety monitoring of swivel construction of bridges. It also contributes to being a possible approach without data-driven model training. Its principal advantages are that it both provides real-time monitoring and is easy to deploy in real construction applications.

This study proposes a collaborative federated learning (CFL) framework to address personal data transmission and retention issues for artificial intelligence (AI)-enabled video surveillance in public spaces.

This study examines specific challenges for long-term people monitoring in public spaces and defines AI-enabled video surveillance requirements. Based on the requirements, this study proposes a CFL framework to gradually adapt AI models’ knowledge while reducing personal data transmission and retention. The framework uses three different federated learning strategies to rapidly learn from different new data sources while minimizing personal data transmission and retention to a central machine.

The findings confirm that the proposed CFL framework can help minimize the use of personal data without compromising the AI model's performance. The gradual learning strategies help develop AI-enabled video surveillance that continuously adapts for long-term deployment in public spaces.

This study makes two specific contributions to advance the development of AI-enabled video surveillance in public spaces. First, it examines specific challenges for long-term people monitoring in public spaces and defines AI-enabled video surveillance requirements. Second, it proposes a CFL framework to minimize data transmission and retention for AI-enabled video surveillance. The study provides comprehensive experimental results to evaluate the effectiveness of the proposed framework in the context of facial expression recognition (FER) which involves large-scale datasets.

Time of flight (ToF) imaging is a promising emerging technology for the purposes of crop identification. This paper aim to presents localization system for identifying and localizing asparagus in the field based on point clouds from ToF imaging. Since the semantics are not included in the point cloud, it contains the geometric information of other objects such as stones and weeds other than asparagus spears. An approach is required for extracting the spear information so that a robotic system can be used for harvesting.

A real-time convolutional neural network (CNN)-based method is used for filtering the point cloud generated by a ToF camera, allowing subsequent processing methods to operate over smaller and more information-dense data sets, resulting in reduced processing time. The segmented point cloud can then be split into clusters of points representing each individual spear. Geometric filters are developed to eliminate the non-asparagus points in each cluster so that each spear can be modelled and localized. The spear information can then be used for harvesting decisions.

The localization system is integrated into a robotic harvesting prototype system. Several field trials have been conducted with satisfactory performance. The identification of a spear from the point cloud is the key to successful localization. Segmentation and clustering points into individual spears are two major failures for future improvements.

Most crop localizations in agricultural robotic applications using ToF imaging technology are implemented in a very controlled environment, such as a greenhouse. The target crop and the robotic system are stationary during the localization process. The novel proposed method for asparagus localization has been tested in outdoor farms and integrated with a robotic harvesting platform. Asparagus detection and localization are achieved in real time on a continuously moving robotic platform in a cluttered and unstructured environment.

The purpose of this study is to establish a method for accurately extracting torch and seam features. This will improve the quality of narrow gap welding. An adaptive deflection correction system based on passive light vision sensors was designed using the Halcon software from MVtec Germany as a platform.

This paper proposes an adaptive correction system for welding guns and seams divided into image calibration and feature extraction. In the image calibration method, the field of view distortion because of the position of the camera is resolved using image calibration techniques. In the feature extraction method, clear features of the weld gun and weld seam are accurately extracted after processing using algorithms such as impact filtering, subpixel (XLD), Gaussian Laplacian and sense region for the weld gun and weld seam. The gun and weld seam centers are accurately fitted using least squares. After calculating the deviation values, the error values are monitored, and error correction is achieved by programmable logic controller (PLC) control. Finally, experimental verification and analysis of the tracking errors are carried out.

The results show that the system achieves great results in dealing with camera aberrations. Weld gun features can be effectively and accurately identified. The difference between a scratch and a weld is effectively distinguished. The system accurately detects the center features of the torch and weld and controls the correction error to within 0.3mm.

An adaptive correction system based on a passive light vision sensor is designed which corrects the field-of-view distortion caused by the camera’s position deviation. Differences in features between scratches and welds are distinguished, and image features are effectively extracted. The final system weld error is controlled to 0.3 mm.

Systematic efforts to study students' use of informal learning spaces are crucial for determining how, when and why students use such spaces. This case study provides an example of an effort to evaluate an informal learning space on the basis of students' usage of the space and the features within the space.

Use of heatmap camera technology and a semi-structured interview with a supervisor of an informal learning space supported the mixed-methods evaluation of the space.

Findings from both the heatmap outputs and semi-structured interview suggested that students' use of the informal learning space is limited due to the location of the space on campus and circumstances surrounding students' day-to-day schedules and needs.

Findings from both the heatmap outputs and semi-structured interview suggested that students' use of the informal learning space is limited due to the location of the space on campus and circumstances surrounding students' day-to-day schedules and needs. These findings are actively contributing to the authors’ institution’s efforts surrounding planning, funding and design of other informal learning spaces on campus.

While most research on instructors' and students' use of space has taken place in formal classrooms, some higher education scholars have explored ways in which college and university students use informal spaces around their campuses (e.g. Harrop and Turpin, 2013; Ramu et al., 2022). Given the extensive time students spend on their campuses outside of formal class meetings (Deepwell and Malik, 2008), higher education institutions must take measures to better understand how their students use informal learning spaces to allocate resources toward the optimization of such spaces. This mixed-methods case study advances the emerging global discussion on how, when and why students use informal learning spaces.

Using real-time support systems may help operators in road construction to improve paving and compaction operations. Nowadays, these systems transform from descriptive to prescriptive systems. Prescriptive or operator guidance systems propose operators actionable compaction strategies and guidance, based on the data collected. It is investigated how these systems mediate the perceptions and actions of operators in road pavement practice.

A case study is conducted on the specific application of an operator guidance system in a road pavement project. In this case study, comprehensive information is presented regarding the process of converting input in the form of data from cameras and sensors into useful output. The ways in which the operator guidance systems translate data into actionable guidance for operators are analyzed from the technological mediation perspective.

Operator guidance systems mediate actions of operators physically, cognitively and contextually. These different types of action mediation are related to preconditions for successful implementation and use of these systems. Coercive interventions only succeed if there is widespread agreement among the operators. Persuasive interventions are most effective when collective and individual interests align. Contextual influence relates to designs of the operator guidance systems that determine human-technology interactions when using them.

This is the first study that analyzes the functioning of an operator guidance system using the technological mediation approach. It adds a new perspective on the interaction between this system and its users in road pavement practice.