Search results

1 – 10 of 143
Article
Publication date: 30 November 2023

Moses Asori, Emmanuel Dogbey, Solomon Twum Ampofo and Julius Odei

Current evidence indicates that humans and animals are at increased risk of multiple health challenges due to microplastic (MP) profusion. However, mitigation is constrained by…

Abstract

Purpose

Current evidence indicates that humans and animals are at increased risk of multiple health challenges due to microplastic (MP) profusion. However, mitigation is constrained by inadequate scientific data, further aggravated by the lack of evidence in many African countries. This review therefore synthesized evidence on the current extent of MP pollution in Africa and the analytical techniques for reporting.

Design/methodology/approach

A literature search was undertaken in research databases. Medical subject headings (MeSH) terms and keywords were used in the literature search. The authors found 38 studies from 10 countries that met the inclusion criteria.

Findings

Marine organisms had MPs prevalence ranging from 19% to 100%, whereas sediments and water samples had between 77 and 100%. The most common and dominant polymers included polypropylene and polyethylene.

Practical implications

This review shows that most studies still use methods that are prone to human errors. Therefore, the concentration of MPs is likely underestimated, even though the authors’ prevalence evaluations show MPs are still largely pervasive across multiple environmental matrices. Also, the study reveals significant spatial disparity in MP research across the African continent, showing the need for further research in other African countries.

Originality/value

Even though some reviews have assessed MPs pollution in Africa, they have not evaluated sample prevalence, which is necessary to understand not only concentration but pervasiveness across the continent. Secondly, this study delves deeper into various methods of sampling, extraction and analysis of MPs, as well as limitations and relevant recommendations.

Details

Management of Environmental Quality: An International Journal, vol. 35 no. 3
Type: Research Article
ISSN: 1477-7835

Keywords

Article
Publication date: 28 March 2024

Monica Puri Sikka, Jameer Aslam Bargir and Samridhi Garg

Intense interest has been shown in creating new and effective biocide agents as a result of changes in bacterial isolates, bacterial susceptibility to antibiotics, an increase in…

Abstract

Purpose

Intense interest has been shown in creating new and effective biocide agents as a result of changes in bacterial isolates, bacterial susceptibility to antibiotics, an increase in patients with burns and wounds and the difficulty of treating infections and antimicrobial resistance. Woven, nonwoven and knitted materials are used to make dressings; however, nonwoven dressings are becoming more popular because of their softness and high absorption capacity. Additionally, textiles have excellent geometrical, physical and mechanical features including three-dimensional structure availability, air, vapor and liquid permeability, strength, extensibility, flexibility and diversity of fiber length, fineness and cross-sectional shapes. It is necessary to treat every burn according to international protocol and along with it has to focus on particular problems of patients and the best possible results.

Design/methodology/approach

The objective of this paper is to conduct a thorough examination of research pertaining to the utilization of textiles, as well as alternative materials and innovative techniques, in the context of burn wound dressings. Through a critical analysis of the findings, this study intends to provide valuable insights that can inform and guide future research endeavors in this field.

Findings

In the past years, there have been several dressings such as xeroform petrolatum gauze, silver-impregnated dressings, biological dressings, hydrocolloid dressings, polyurethane film dressings, silicon-coated nylon dressings, dressings for biosynthetic skin substitutes, hydrogel dressings, newly developed dressings, scaffold bandages, Sorbalgon wound dressing, negative pressure therapy, enzymatic debridement and high-pressure water irrigation developed for the fast healing of burn wounds.

Originality/value

This research conducts a thorough analysis of the role of textiles in modern burn wound dressings.

Details

Research Journal of Textile and Apparel, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1560-6074

Keywords

Article
Publication date: 27 March 2024

Jyoti Mudkanna Gavhane and Reena Pagare

The purpose of this study was to analyze importance of artificial intelligence (AI) in education and its emphasis on assessment and adversity quotient (AQ).

Abstract

Purpose

The purpose of this study was to analyze importance of artificial intelligence (AI) in education and its emphasis on assessment and adversity quotient (AQ).

Design/methodology/approach

The study utilizes a systematic literature review of over 141 journal papers and psychometric tests to evaluate AQ. Thematic analysis of quantitative and qualitative studies explores domains of AI in education.

Findings

Results suggest that assessing the AQ of students with the help of AI techniques is necessary. Education is a vital tool to develop and improve natural intelligence, and this survey presents the discourse use of AI techniques and behavioral strategies in the education sector of the recent era. The study proposes a conceptual framework of AQ with the help of assessment style for higher education undergraduates.

Originality/value

Research on AQ evaluation in the Indian context is still emerging, presenting a potential avenue for future research. Investigating the relationship between AQ and academic performance among Indian students is a crucial area of research. This can provide insights into the role of AQ in academic motivation, persistence and success in different academic disciplines and levels of education. AQ evaluation offers valuable insights into how individuals deal with and overcome challenges. The findings of this study have implications for higher education institutions to prepare for future challenges and better equip students with necessary skills for success. The papers reviewed related to AI for education opens research opportunities in the field of psychometrics, educational assessment and the evaluation of AQ.

Details

Education + Training, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0040-0912

Keywords

Article
Publication date: 22 March 2024

Ching Yin Ip

This study evaluated the effects of adherence to social missions and relational outcomes on willingness to pay for products from social enterprises.

Abstract

Purpose

This study evaluated the effects of adherence to social missions and relational outcomes on willingness to pay for products from social enterprises.

Design/methodology/approach

The study’s conceptual model was based on the social resource–based view. Three social enterprises in Taiwan were analysed, and the determinants of willingness to pay for products from these enterprises were investigated. An online survey was conducted, and 404 valid responses were collected and analysed using structural equation modelling. The moderating effect of sustainability orientation was evaluated using the multigroup method.

Findings

The results indicated that adherence to social missions was a critical predictor of relational outcomes and willingness to pay. In addition, sustainability orientation positively moderated the effect of relational outcomes on willingness to pay.

Originality/value

This study enriches the literature by applying the social resource–based view to the context of social enterprises. The study findings have key implications for managers and practitioners of social enterprises seeking to build relationships with stakeholders.

Details

Kybernetes, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0368-492X

Keywords

Article
Publication date: 29 December 2023

Karikari Amoa-Gyarteng and Shepherd Dhliwayo

This study clarifies the intricate nature of globalization's impact on unemployment rates in South Africa. Given the heterogeneous views on globalization's effect on economic…

Abstract

Purpose

This study clarifies the intricate nature of globalization's impact on unemployment rates in South Africa. Given the heterogeneous views on globalization's effect on economic development, this study aims to offer a nuanced perspective. Furthermore, it aims to explore the mediating role of entrepreneurial development in shaping the complex relationship between globalization and unemployment.

Design/methodology/approach

The study employs four key indicators to measure entrepreneurial development, globalization and unemployment rates in South Africa. Hierarchical regression is used to evaluate the relationship between globalization and unemployment rates, and how entrepreneurial development mediates this relationship. Additionally, both the Sobel test and bootstrapping analyses were employed to verify and validate the mediating relationship.

Findings

The study demonstrates that globalization constitutes a crucial determinant of (un)employment rates in South Africa. The study shows that entrepreneurial development, specifically in the context of established business ownership, but not total early-stage entrepreneurial activity, exhibits an inverse relationship with unemployment rates. Moreover, it was observed that the positive impact of globalization on entrepreneurial development in South Africa becomes evident as SMEs advance to the established stage.

Research limitations/implications

The study's concentration on South Africa constrains the applicability of the results to other nations.

Practical implications

Based on the findings of this study, it is essential for emerging economies, such as South Africa, to take measures to foster a robust entrepreneurial ecosystem that can aid in the growth and international competitiveness of young SMEs.

Originality/value

To the best of the authors' knowledge, this study represents the first endeavor to analyze the potential impact of entrepreneurial development, as measured by both nascent and mature SMEs, on the correlation between globalization and unemployment.

Details

Journal of Small Business and Enterprise Development, vol. 31 no. 2
Type: Research Article
ISSN: 1462-6004

Keywords

Open Access
Article
Publication date: 20 March 2023

Nadeem Rais, Akash Ved, Rizwan Ahmad, Kehkashan Parveen and Mohd. Shadab

Renal failure is an end-stage consequence after persistent hyperglycemia during diabetic nephropathy (DN), and the etiology of DN has been linked to oxidative stress. The purpose…

Abstract

Purpose

Renal failure is an end-stage consequence after persistent hyperglycemia during diabetic nephropathy (DN), and the etiology of DN has been linked to oxidative stress. The purpose of this research was to determine the beneficial synergistic effects of S-Allyl Cysteine (SAC) and Taurine (TAU) on oxidative damage in the kidneys of type 2 diabetic rats induced by hyperglycemia.

Design/methodology/approach

Experimental diabetes was developed by administering intraperitoneal single dose of streptozotocin (STZ; 65 mg/kg) with nicotinamide (NA; 230 mg/kg) in adult rats. Diabetic and control rats were treated with SAC (150 mg/kg), TAU (200 mg/kg) or SAC and TAU combination (75 + 100 mg/kg) for four weeks. The estimation of body weight, fasting blood glucose (FBG), oral glucose tolerance test (OGTT), oxidative stress markers along with kidney histopathology was done to investigate the antidiabetic potential of SAC/TAU in the NA/STZ diabetic group.

Findings

The following results were obtained for the therapeutic efficacy of SAC/TAU: decrease in blood glucose level, decreased level of thiobarbituric acid reactive substances (TBARS) and increased levels of GSH, glutathione-s-transferase (GST) and catalase (CAT). SAC/TAU significantly modulated diabetes-induced histological changes in the kidney of rats.

Originality/value

SAC/TAU combination therapy modulated the oxidative stress markers in the kidney in diabetic rat model and also prevented oxidative damage as observed through histopathological findings.

Details

Arab Gulf Journal of Scientific Research, vol. 42 no. 2
Type: Research Article
ISSN: 1985-9899

Keywords

Article
Publication date: 27 March 2024

Ilija Djekic and Nada Smigic

The main purpose of this paper was to evaluate the validation process of food safety control measures.

Abstract

Purpose

The main purpose of this paper was to evaluate the validation process of food safety control measures.

Design/methodology/approach

The validation of control measures has been analyzed at 50 food companies in Serbia. The sample included companies that produce food of both plant and animal origin and have certified food safety management systems. A total of 156 control measures that combat physical hazards (41.6%), followed by microbial hazards (34.0%) and chemical hazards (24.4%), have been analyzed. To enable quantification of the validation protocols, each control measure was assigned a score.

Findings

The validation scores showed that the highest level of validation was observed in large companies, as opposed to small and medium-sized companies (p < 0.05). The type of food safety hazards and the food sector did not reveal any statistical differences in-between the scores. The main approach to validating control measures was referring to the technical documentation of equipment used (52.6%), followed by scientific and legal requirements (30.7%). Less than 20% of the analyzed control measures were validated with operational data collected on-site. No mathematical modeling was observed for the sampled food companies. Future steps should include the development of validation guides for different types of control measures and training modules.

Practical implications

This study can serve as an improvement guide for food safety consultants, food safety auditors, certification bodies, inspection services, food technologists and food managers.

Originality/value

This study is one of the first to provide an insight into how food companies validate their control measures to combat microbial, chemical and physical food safety hazards.

Details

British Food Journal, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0007-070X

Keywords

Article
Publication date: 24 January 2024

Nirmal Singh, Harmanjit Singh Banga, Jaswinder Singh and Rajnish Sharma

This paper aims to prompt ideas amongst readers (especially librarians) about how they can become active partners in knowledge dissemination amongst concerned user groups by…

Abstract

Purpose

This paper aims to prompt ideas amongst readers (especially librarians) about how they can become active partners in knowledge dissemination amongst concerned user groups by implementing 3D printing technology under the “Makerspace.”

Design/methodology/approach

The paper provides a brief account of various tools and techniques used by veterinary and animal sciences institutions for information dissemination amongst the stakeholders and associated challenges with a focus on the use of 3D printing technology to overcome the bottlenecks. An overview of the 3D printing technology has been provided following the instances of use of this novel technology in veterinary and animal sciences. An initiative of the University Library, Guru Angad Dev Veterinary and Animal Sciences University, Ludhiana, to harness the potential of this technology in disseminating information amongst livestock stakeholders has been discussed.

Findings

3D printing has the potential to enhance learning in veterinary and animal sciences by providing hands-on exposure to various anatomical structures, such as bones, organs and blood vessels, without the need for a cadaver. This approach enhances students’ spatial understanding and helps them better understand anatomical concepts. Libraries can enhance their visibility and can contribute actively to knowledge dissemination beyond traditional library services.

Originality/value

The ideas about how to harness the potential of 3D printing in knowledge dissemination amongst livestock sector stakeholders have been elaborated. This promotes creativity amongst librarians enabling them to think how they can engage in knowledge dissemination thinking out of the box.

Details

Library Hi Tech News, vol. 41 no. 2
Type: Research Article
ISSN: 0741-9058

Keywords

Book part
Publication date: 8 April 2024

Jana Šimáková

Czechia's economic growth is substantially dependent on foreign trade. An independent monetary policy in a managed floating exchange rate regime gives a unique perspective on the…

Abstract

Czechia's economic growth is substantially dependent on foreign trade. An independent monetary policy in a managed floating exchange rate regime gives a unique perspective on the effects of the exchange rate on foreign trade. This chapter evaluates the effects of exchange rate development on different sectors of Czechia's foreign trade. Using disaggregated data based on trading partner and product category, the period from 1999 to 2020 is analyzed. Czechia's 10 major trading partners are included in the estimation. The relationship between exchange rates and foreign trade is assessed through a Johansen cointegration approach and modified vector error correction model. The results of the Johansen cointegration test indicate that the majority of the aggregate bilateral trade balances are in a long-term relationship with Czechia's gross domestic product (GDP), foreign GDP and exchange rate movements. The J-curve is proved only in chemicals and related products traded with France, manufactured goods traded with Italy and Slovakia and mineral fuels and lubricants traded with the Netherlands.

Details

Modeling Economic Growth in Contemporary Czechia
Type: Book
ISBN: 978-1-83753-841-6

Keywords

Article
Publication date: 30 November 2023

Florencia Kalemkerian, Rossella Pozzi, Martin Tanco, Alessandro Creazza and Javier Santos

The purpose of this study is to propose a new mapping tool called Circular Value Stream Mapping (C-VSM) that combines Circular Economy principles with Lean tools to enhance…

Abstract

Purpose

The purpose of this study is to propose a new mapping tool called Circular Value Stream Mapping (C-VSM) that combines Circular Economy principles with Lean tools to enhance sustainability performance in operations.

Design/methodology/approach

To develop the C-VSM tool, the researchers conducted a literature review and a focus group. The tool was then applied to two real case studies in the agri-food sector, specifically analyzing an artichoke and olive oil producer, to assess its validity and effectiveness.

Findings

The study introduces the Circular Resource Box (CRB) as a key innovation in the C-VSM tool. This visual representation effectively captures resource circularity and how resources and wastes are managed, making it easy to identify circularity in the production process. By combining qualitative and quantitative information with this visual representation, companies can identify improvement opportunities aligned with the CE.

Research limitations/implications

The research is limited in scope as it focuses on the application of the C-VSM tool in the agri-food sector. Further research could explore its applicability in other industries and settings to understand its broader impact.

Practical implications

The C-VSM tool provides practical benefits to companies seeking to transition from linear to circular production processes. It enables practitioners to identify opportunities to reduce environmental impacts and optimize production operations in line with CE.

Originality/value

The introduction of the C-VSM tool is a novel approach that bridges the gap between Lean Manufacturing and CE concepts, advancing the understanding of how CE thinking can be effectively implemented in operations.

Details

Management of Environmental Quality: An International Journal, vol. 35 no. 3
Type: Research Article
ISSN: 1477-7835

Keywords

1 – 10 of 143