Search results

The Fabry-Perot sapphire optical fiber sensor is an excellent choice for high-temperature sensing in civil and military fields, such as oil exploitation, engine and turbine. The purpose of this paper is to study the high-reflective film system withstanding high temperature in Fabry-Perot sapphire optical fiber high-temperature sensor. To improve the performance of the sensor and reduce the difficulty of signal acquisition, one of the key ways is to enhance the normalized light intensity of F-P sensor, which can be achieved by coating the high-reflective film system on the fiber end.

The high-reflective film system can be achieved by a multilayer film with alternating ZrO₂ and Al₂O₃ film layers whose refractive indexes are different. In addition, the optimum film alternating sequences and the influence of the number of film layers, incident angle and temperature should be obtained by numerical analysis.

With the increase of the number of film layers, the reflectivity rises gradually and the change trend is more and more gentle. A minimum of the spectral reflectivity will occur at a certain incident angle depending on the design of the periodic multilayer system. Temperature affects the reflectivity of high-reflective film system. The normalized light intensity of the F-P sensor coated with high-reflective film system enhances greatly which is helpful to the signal demodulation. The temperature response of the F-P sensor is mainly determined by the characteristics of the F-P cavity.

Higher reflectivity, lower cost and easy signal acquisition are the most important features of the introduced high-reflective film system for the Fabry-Perot sapphire optical fiber high-temperature sensor.

The purpose of this paper is to investigate microstructure and properties of Sn3.0Ag0.5Cu-XAl₂O₃ composite solder which were prepared through powder metallurgy route.

Sn3.0Ag0.5Cu (SAC305)-XAl₂O₃ (X = 0.2, 0.4, 0.6, 0.8 Wt. %) composite solders were prepared through the powder metallurgy route. The morphology of composite solder powders which consists of Al₂O₃ particles and SAC solder powders after ball milling was observed. The retained ratio of Al₂O₃ nanoparticles in composite solder billets and solder joints were also quantitatively measured. Furthermore, the as-prepared composite solder alloys were studied extensively with regard to their microstructures, thermal property, wettability and mechanical properties.

After ball milling, the Al₂O₃ nanoparticles added were observed embedded into the surface of SAC solder powders. Only about 5-10 per cent of the initial Al₂O₃ nanoparticles added were detected in the composite solder joints after reflow. In addition, finer ß-Sn grains were achieved with addition of Al₂O₃ nanoparticles; the Al₂O₃ nanoparticles were found retained in the composite solder matrix. Besides, negligible changes in melting temperature and the considerably reduced undercooling were obtained in composite solder alloys. Wettability was improved by appropriate addition of Al₂O₃ nanoparticles. Microhardness and shear strength of composite solders were both improved after Al₂O₃ nanoparticles addition.

This paper indicated that powder metallurgy route offered a feasible approach to produce nanoparticle reinforced composite solder. In addition, the quantitative analysis of the actual retained ratio of the Al₂O₃ nanoparticles in solder joints provided practical implications for the manufacture of composite solders.

Under the trend of global economic integration and the new context of stagflation, frequent fluctuations in international interest rates are exerting far-reaching impacts on the world economy. In this paper, the transmission mechanism of the impact of fluctuations in international interest rates (specifically, the American interest rate) on the bankruptcy risk in China's pillar industry, the construction industry (which is also sensitive to interest rates), is examined.

Using an improved contingent claims analysis, the bankruptcy risk of enterprises is calculated in this paper. Additionally, an individual fixed-effects model is developed to investigate the mediating effects of international interest rates on the bankruptcy risk in the Chinese construction industry. The heterogeneity of subindustries in the industrial chain and the impact of China's energy consumption structure are also analysed in this paper.

The findings show that fluctuations in international interest rates, which affect the bankruptcy risk of China's construction industry, are mainly transmitted through two major pathways, namely, commodity price effects and exchange rate effects. In addition, the authors examine the important impact of China's energy consumption structure on risk transmission and assess the transmission and sharing of risks within the industrial chain.

First, in the research field, the study of international interest rate risk is extended to domestic-oriented industries. Second, in terms of the research content, this paper is focused on China-specific issues, including the significant influence of China's energy consumption structure characteristics and the risk contagion (and risk sharing) as determined by the current development of the Chinese construction industry. Third, in terms of research methods a modified contingent claim analysis approach to bankruptcy risk indicators is adopted for this study, thus overcoming the problems of data frequency, market sentiment and financial data fraud, which are issues that are ignored by most relevant studies.

The purpose of this study was to investigate the effect of a dietary probiotic on the growth performance and survival rate of Litopenaeus vannamei shrimp. Furthermore, the microbial quality of shrimp was evaluated.

Shrimp were divided into treatment and control groups (each group containing 45 shrimp). They were fed for four weeks with a control diet alone or supplemented with a commercial probiotic (Protexin®). At the end of the trial, they were assessed for survival rate, weight gain, average daily gain and specific growth rate. Samples of tail meat were also provided aseptically from peeled shrimp for bacteriological analysis including the count of Staphylococcus aureus, enterococci, Clostridium perfringens, fecal coliform, Salmonella, Escherichia coli, Listeria monocytogenes and total bacterial count.

The growth performance of the probiotic-treated group significantly (p < 0.05) increased at the end of the experimental period. However, no significant differences were observed for the survival rate between the groups (p > 0.05). The count of C. perfringens and the total bacterial count in shrimp supplemented with the probiotic were significantly lower than those of controls (p < 0.05). The count of coliforms and S. aureus was not significantly different between the groups (p > 0.05).

It could be concluded that the probiotic bacteria have the potential to stimulate the growth performance of L. vannamei. They can also be used for biological control of food-borne pathogens and improve the microbial quality and safety of shrimp at the farm level.

The growing environmental awareness all through the world has motivated a standard change toward planning and designing better materials having good performance, which are very much suited to the environmental factors. The purpose of this study is to investigate the impact on mechanical, thermal and water absorption properties of sawdust-based composites reinforced by epoxy, and the amount of sawdust in each form.

Manufacturing of the sawdust reinforced epoxy composites is the main area of the research for promoting the green composite by having good mechanical properties, biodegradability or many applications. Throughout this research work, the authors emphasize the importance of explaining the methodology for the evaluation of the mechanical and water absorption properties of the sawdust reinforced epoxy composites used by researchers.

In this paper, a comprehensive review of the mechanical properties of sawdust reinforced epoxy composite is presented. This study is reported about the use of different Wt.% of sawdust composites prepared by different processes and their mechanical, thermal and water absorption properties. It is studied that after optimum filler percentage, mechanical, thermal properties gradually decrease, but water absorption property increases with Wt.% of sawdust. The changes in the microstructure are studied by using scanning electron microscopy.

The novelty of this study lies in its use of a systematic approach that offers a perspective on choosing suitable processing parameters for the fabrication of composite materials for persons from both industry and academia. A study of sawdust reinforced epoxy composites guides new researchers in the fabrication and characterization of the materials.