Search results

This study aims to focus on the optimal green R&D of a capital-constrained supply chain under different channel power structures as well as the impact of capital constraint, financing cost, channel power structure and cost-reducing efficiency on green R&D and supply chain profitability.

A two-echelon supply chain is considered. The upstream firm engages in green R&D but has capital constraints that can be overcome by external financing. Green R&D is beneficial to reduce production costs and increase consumer demand. Based on whether or not the upstream firm is capital constrained and dominates the supply chain, four models are developed.

Capital constraints significantly lower green R&D and supply chain profitability. Transferring leadership from the upstream to the downstream firms leads to higher green R&D levels and downstream firm profitability, whereas the upstream firm's profitability is increased (decreased) if green R&D investment efficiency is high (low) enough. Greater financing costs reduce green R&D and downstream firm profitability; however, the upstream firm's profitability under the model in which it functions as the follower increases if the initial capital is sufficient. More importantly, empirical analysis based on practice data is used to verify the theoretical results reported above.

This study reveals how upstream firms in supply chains decide green R&D decisions in situations with capital constraints, providing managers and governments with an understanding of the impact of capital constraint, channel power structure, financing cost and cost-reducing efficiency on supply chain green R&D and profitability.

The major contributions are the exploration of supply chain green R&D by taking into consideration channel power structures and cost-reducing efficiency and the validation of theoretical results using practice data.

The objective of this paper is to investigate numerically the buckling behavior of submersible composite cylinders.

By means of FEM and golden section method, the search of hoop winding layers, longitudinal winding layers and helical winding layers are studied to optimize the buckling pressure. Considering the mid-strengthening cylinder, the size and distribution of stiffeners are studied systematically.

The results show that laying the hoop winding layers in the two outer sidewalls and the longitudinal winding layers in the middle of the shell is helpful to increase the buckling pressure, and the optimal helical winding angle changes with slenderness ratio.

For mid-strengthening cylinder, the effect of helical winding angle of stiffener on buckling pressure becomes weak gradually with the increase of stiffener thickness. With the increasing of the spacing between stiffeners, the buckling pressure increases first and decreases later. What is more, the mid-strengthening cylinder is less sensitive to the initial geometric imperfections than unstiffened shells.

This paper aims to prepare third-order nonlinear optical (NLO) organic materials with large nonlinear optimization value, high damage threshold and ultrafast response time.

A series of novel symmetric and asymmetric compounds possessing third-order NLO properties were synthesized using 1,3,5-tribromobenzene as the basis. The photophysical and electrochemical properties, as well as the click reactions, were characterized by means of UV–VIS–NIR absorption spectroscopy and cyclic voltammetry.

The donor–acceptor chromophores were inserted into compound, making the molecule to have a broader absorption in the near-infrared regions and a narrower optical and electrochemical band gap. It also formed an electron-delocalized organic system, which has larger effects on achieving a third-order NLO response. The third-order NLO phenomenon of benzene ring complexes was experimentally studied at 532 nm using Z-scan technology, and some compounds showed the expected NLO properties.

The click products exhibit more NLO phenomena by performing different click combinations to the side groups, opening new perspectives on using the system in a variety of photoelectric applications.

The inclusion of esports as an official event in the Hangzhou Asian Games is an important step towards the institutionalisation of esports. The significance of this event marks that Asia once again takes a lead in the global esportisation. This chapter investigates a series of history events in the inclusion process of esports into the comprehensive Games in Asia using process sociology and actor network theory (ANT). This study will analyse the type characteristics of esports events in Hangzhou Asian Games, whilst examining how key stakeholders' interact and balance in the network composed of international sports organisations, host of the event, emerging esports organisations and esports game companies. The chapter also examines the functions of global game industrial economic geography, local cultural politics, esports geopolitics and Olympic values in esports sportization, aiming to reveal the implications of esports inclusion in the Asian Games on the debate of whether esports meets the criteria to be classified as a ‘sport’ and its enlightenment of digital strategy to the inclusion esports in the Olympics.

Explains why, following China‘s implementation of a market economy, public accounting firms were required to affiliate (hook‐up) with existing government or educational institutions until 1993 when partnerships and limited liability firms were also allowed. Describes the rules relating to independent accounting firms and changes which should foster their development but reports that, in fact, most firms are still affiliated. Discusses the reasons for this and the resulting problems, e.g. lack of competition and independence, low quality of service and increases in fraud, misrepresentation and under‐disclosure. Reveals that despite the 1995 exposure draft on eliminating the hooking‐up structure few de‐affiliations have taken place and identifies four problems which need solving if full de‐affiliation is to be achieved.

Detecting the orientation of cracks is a major challenge in the development of eddy current nondestructive testing probes. Eddy current-based techniques are limited in their ability to detect cracks that are not perpendicular to induced current flows. This study aims to investigate the application of the rotating electromagnetic field method to detect arbitrary orientation defects in conductive nonferrous parts. This method significantly improves the detection of cracks of any orientation.

A new rotating uniform eddy current (RUEC) probe is presented. Two exciting pairs consisting of similar square-shaped coils are arranged orthogonally at the same lifting point, thus avoiding further adjustment of the excitation system to generate a rotating electromagnetic field, eliminating any need for mechanical rotation and focusing this field with high density. A circular detection coil serving as a receiver is mounted in the middle of the excitation system.

A simulation model of the rotating electromagnetic field system is performed to determine the rules and characteristics of the electromagnetic signal distribution in the defect area. Referring to the experimental results aimed to detect artificial cracks at arbitrary angles in underwater structures using the rotating alternating current field measurement (RACFM) system in Li et al. (2016), the model proposed in this paper is validated.

CEDRAT FLUX 3D simulation results showed that the proposed probe can detect cracks with any orientation, maintaining the same sensitivity, which demonstrates its effectiveness. Furthermore, the proposed RUEC probe, associated with the exploitation procedure, allows us to provide a full characterization of the crack, namely, its length, depth and orientation in a one-pass scan, by analyzing the magnetic induction signal.

In the past 70 years since the founding of the People’s Republic of China, China’s economic studies have been constantly centered on major issues such as national modernization, social economic development and the establishment, reform and improvement of socialist economic system. The paper aims to discuss this issue.

It has experienced a process of transition from the establishment of traditional Soviet’s paradigm of political economics to that of modern economics, during which drastic changes have been observed in various aspects of China’s economics, including research content, scope and methods.

Based on that, a discipline system of economics in line with international economics has been initially established. Currently, under the guidance of Marxism, scholars in China’s economics actively draw on the beneficial knowledge system and analytical methods from modern economics, emancipate their minds, seek truth from facts and constantly fortify confidence in the socialist path, theory, system and culture, continuously enhance the discourse power of China’s economics in global economic governance system, so as to push forward to the building of a theoretical system of socialist economics with Chinese Characteristics in the new era.

Economics is a discipline that studies resource allocation and human’s behavior of making a choice based on rationality. Emerged in the industrial revolution and developed in the exploration of a large-scale socialized mode of production and resource allocation system, this discipline has gradually become a broadly explanatory force in social sciences which profoundly affects the economic decision-making behaviors of the government and various economic entities.

The purpose of this paper is to provide an overview of China's contemporary banking regulatory system, with particular focus on regulatory control of foreign banks trading in China. The paper addresses three aspects of Chinese banking regulation: what does China regulate; why does China regulate; and how does China regulate. Much of the discussion is concerned with China's regulatory agencies particularly with the role of the CBRC as the principal regulator in China's banking sector.

In the first instance the paper presents an overview of banking regulatory models gained from a review of theoretical literature in the area. Then through a wide ranging review of Chinese publications, both academic and official, the paper seeks to relate the course of regulatory reform in China, both in terms of compliance with orthodox regulatory theory, and the unique regulatory requirements of the Chinese banking system.

The paper recognises that China has embraced the need for banking regulation with the establishment of an institutional structure that is responsive to both banking supervision and government policy. Within that structure the role of the CBRC, the pervasive manner in which that agency operates, and the content of its regulatory output have been identified and critically reviewed.

In its review of the modernization of China's banking regulatory system, the paper achieves originality from the author's research into, and critical reflections on Chinese generated literature, both institutional and academic, which is then communicated in a manner that will be understood by readers familiar with Western banking regulatory theory.

In light of university business English pedagogical innovation, this study reports an empirical study with 66 English major participants.

The study uses online survey and participant observation to investigate their practice-oriented motivation and needs, the perceptions of using vocational education and training pedagogy in business English teaching and the learning outcomes in a Chinese university context.

The study found participants with motivations to learn business and trade knowledge, develop practice-oriented abilities and the preferences of learning flexibly and autonomously. For the perceptions of using vocational education and training pedagogy, simulations of meetings and negotiations were recommended and the job-based competency development model was useful. Workplace simulation was also particularly suggested to bridge the gap between classroom and workplace. For learning outcomes, writing practices and workplace simulation were considered particularly useful. The learning gains were found in international trade correspondence writing. While the intention of continuing learning business English correspondence writing was identified, more opportunities should be created for more practice-oriented activities, such as internship or corporate visit.

Informed by vocational education and training theory, the study has important pedagogical, theoretical and policy implications for business English teaching in both China and worldwide contexts.