Search results
1 – 10 of 27Zhihong Sun and Jing Wang
The purpose of this paper is to solve the issue of via filling and pattern plating simultaneously by concentration optimization of accelerator and leveler in the…
Abstract
Purpose
The purpose of this paper is to solve the issue of via filling and pattern plating simultaneously by concentration optimization of accelerator and leveler in the electroplating bath.
Design/methodology/approach
This paper designs a series of experiments to verify the performance of pattern plating with the via filling plating formula. Then the compositions of electroplating solution are optimized to achieve via filling and pattern plating simultaneously. Finally, the mechanism of co-plating for via and line is discussed in brief.
Findings
To achieve excellent performance for via filling and pattern plating simultaneously, proportion of additives are comprehensively considered in optimization of electroplating process. Effects of additives on the via filling and pattern plating should be taken into consideration, especially in achieving flat lines.
Originality/value
This paper discusses the different effects of accelerator and leveler on the via filling and the pattern plating, respectively. The process of co-plating for the via and the line is presented. The superfilling of via and the flat line are simultaneously obtained with the optimized via filling formula.
Details
Keywords
Hongbo Shan, Shenhua Zhou and Zhihong Sun
The purpose of this paper is to propose a novel method under the name of genetic simulated annealing algorithm (GSAA) and ant colony optimization (ACO) algorithm for…
Abstract
Purpose
The purpose of this paper is to propose a novel method under the name of genetic simulated annealing algorithm (GSAA) and ant colony optimization (ACO) algorithm for assembly sequence planning (ASP) which is possessed of the competence for assisting the planner in generating a satisfied and effective assembly sequence with respect to large constraint assembly perplexity.
Design/methodology/approach
Based on the genetic algorithm (GA), simulated annealing, and ACO algorithm, the GSAA are put forward. A case study is presented to validate the proposed method.
Findings
This GSAA has better optimization performance and robustness. The degree of dependence on the initial assembly sequence about GSAA is decreased. The optimization assembly sequence still can be obtained even if the assembly sequences of initial population are infeasible. By combining GA and simulated annealing (SA), the efficiency of searching and the quality of solution of GSAA is improved. As for the presented ACO algorithm, the searching speed is further increased.
Originality/value
Traditionally, GA heavily depends on the choosing original sequence, which can result in early convergence in iterative operation, lower searching efficiency in evolutionary process, and non‐optimization of final result for global variable. Similarly, SA algorithms may generate a great deal of infeasible solutions in the evolution process by generating new sequences through exchanging position of the randomly selected two parts, which results in inefficiency of the solution‐searching process. In this paper, the proposed GSAA and ACO algorithm for ASP are possessed of the competence for assisting the planner in generating a satisfied and effective assembly sequence with respect to large constraint assembly perplexity.
Details
Keywords
Zhihong Jin, Xiaohan Wang, Jiaqing Sun and Qi Xu
Energy groups are cargo owners with large amounts of energy sources (such as coal) to transport. To achieve a satisfactory tradeoff between the reliability requirements of…
Abstract
Purpose
Energy groups are cargo owners with large amounts of energy sources (such as coal) to transport. To achieve a satisfactory tradeoff between the reliability requirements of the sea transportation process and the need to control the investment cost, they usually set up a self-owned fleet supplemented by a chartered fleet. This paper aims to investigate the best fleet structure and to evaluate the investment scheme under volatile circumstances in the shipping market.
Design/methodology/approach
The authors construct a mathematical model to determine the ratio of the self-owned fleet to the total fleet to minimize fleet operating costs. The volatility of both freight rates and oil prices is taken into consideration. The CPLEX solver is used to empirically analyze real data from an energy group in China, and the ship investment plan is evaluated considering the technical and economic feasibility.
Findings
If the ratio of the self-owned fleet to the total fleet is increased to the optimal of 90.40%, the total operating cost is reduced by 33.98%. Thus, the energy group should increase its capacity with a Panamax vessel of approximately 82,000 DWT. Purchasing a 5-year-old secondhand ship and building a new ship both have good investment return indicators.
Originality/value
For cargo owners engaging in transporting bulk cargo domestically in China, the suggested fleet ratio can provide a reference with a universal application scale, given the boundary economic conditions (including the volatility of freight rates and oil prices in the shipping market) in the paper.
Details
Keywords
Jie Yang, Mingchao Chang, Zhihong Chen, Lulu Zhou and Jiangjiang Zhang
Based on the intrinsic motivation theory and spiritual leadership theory, the current study proposes a chain mediation model for testing the linkage between spiritual…
Abstract
Purpose
Based on the intrinsic motivation theory and spiritual leadership theory, the current study proposes a chain mediation model for testing the linkage between spiritual leadership and employees' innovative behavior through individual values and role identity.
Design/methodology/approach
In this study, 309 valid leader–subordinate matching questionnaires from 10 Internet enterprises and 21 manufacturing enterprises in China were collected through a field study. The hypotheses were tested using structural equation modeling and bootstrapping.
Findings
The results show that spiritual leadership has a positive impact on employees' innovative behavior. Uncertainty avoidance and creative role identity not only respectively play a mediating role but also play a chain mediating role in the process of spiritual leadership influencing employees' innovative behavior.
Originality/value
This study explores the influence of leadership style on employees' individual values, which has rarely been done in previous studies. Furthermore, the research explores the impact of personal values (uncertainty avoidance) on employee self-perception (creative role identity). And it enriches the relationship between spiritual leadership and employees' innovative behavior and reveals the deeper influence mechanism between them.
Details
Keywords
This paper aims to examine how the official discourse of frugality evolved in China between 1979 and 2015.
Abstract
Purpose
This paper aims to examine how the official discourse of frugality evolved in China between 1979 and 2015.
Design/methodology/approach
The study uses historical and textual analysis. It divides the Chinese official discourse on frugality between 1979 and 2015 into four periods: 1979-1992, 1993-2002, 2003-2012 and 2013-2015.
Findings
A Chinese official discourse on frugality persisted between 1979 and 2015, even though during the same period, China transformed from a socialist economy of central planning and insufficient supply to a market economy of excessive supply and weak consumer demand. The intensity of this official discourse frequently vacillated, adjusting to both economic and political conditions of the time as part of the larger political-economic contestation between competing ideas and policies.
Originality/value
There have been calls for more studies on how frugality discourses have evolved in international markets, especially in terms of how they are shaped by local historical antecedents and long-standing tensions. Through the Chinese case, this article illuminates why some traditional values persist and obtain a paradoxical co-existence with consumerist ethos in our modern society.
Details
Keywords
Wencheng Ni, Hui Li, Zhihong Jiang, Bainan Zhang and Qiang Huang
The purpose of this paper is to design an exoskeleton robot and present a corresponding rehabilitation training method for patients in different rehabilitation stages.
Abstract
Purpose
The purpose of this paper is to design an exoskeleton robot and present a corresponding rehabilitation training method for patients in different rehabilitation stages.
Design/methodology/approach
This paper presents a lightweight seven-degrees-of-freedom (DOF) cable-driven exoskeleton robot that is wearable and adjustable. After decoupling joint movement caused by a cable-driven mechanism, active rehabilitation training mode and passive rehabilitation training mode are proposed to improve the effect of rehabilitation training.
Findings
Simulations and experiments have been carried out, and the results validated the feasibility of the proposed mechanism and methods by a fine rehabilitative effect with different persons.
Originality/value
This paper designed a 7-DOF cable-driven exoskeleton robot that is suitable for patients of different body measurements and proposed the active rehabilitation training mode and passive rehabilitation training mode based on the cable-driven exoskeleton robot.
Details
Keywords
Zhihong Du, Xinhua Ni, Xiequan Liu and Cheng Chen
According to the microstructural characteristics of composite ceramic, the strain field distribution regularity of triangular symmetrical composite eutectic is obtained…
Abstract
Purpose
According to the microstructural characteristics of composite ceramic, the strain field distribution regularity of triangular symmetrical composite eutectic is obtained from the stress field distribution regularity of three-phase element in composite ceramic. In allusion to the damage of composite eutectic, it is introduced as a variable in this paper with the aim to determine the strain field distribution regularity of triangular symmetrical composite eutectic with damage behavior.
Design/methodology/approach
On the basis of the relationship between strain field and fiber inclusions volume fraction, the strain field of composite eutectic is analyzed.
Findings
The strain field of composite ceramic is distinctly dependent on the fiber inclusions volume fraction, fiber diameter and damage behavior of composite eutectic by quantitative analysis. The strain in matrix parallel to eutectic is the maximum linear strain and the main factor for the damage and fracture of eutectics.
Originality/value
The foundation of the strength research of composite eutectic is laid.
Details
Keywords
The goal of this chapter is to respond to the theoretical inquiries by scholars who are interested in how the public–private partnership (PPP) models adapt to China’s…
Abstract
The goal of this chapter is to respond to the theoretical inquiries by scholars who are interested in how the public–private partnership (PPP) models adapt to China’s context where political power dictates economic strategies. We also want to provide suggestions to policy designers who aim to promote a sustainable investment environment for domestic and international investors. We review the literature that explains the upside and downside of PPP projects in contemporary China. (1) We classify the trajectory of PPP evolution into four phases, i.e., emergence, growth, recession and revival. (2) We note that private companies take a disadvantageous position in the partnership compared with governments and state-owned enterprises because of a lack of specialized legislation, unequal competition between private companies and state-owned enterprises and the opposition from the civic society. (3) We identify political risks as the most influential risks. Political risks also lead to the misallocation of other risks between public and private parties that contributes to the high failure rate of China’s PPP projects. Based on these findings, we recommend governments to draft specialized legislation, stabilize the political environment and provide favourable subsidies to local governments to limit the risks involved in PPP projects. We also advise private enterprises and state-owned enterprises to focus on negotiating over task and risk division with governments when they make decisions to participate in PPP projects. This full review of studies on PPP development in China provides reliable recommendations to scholars, governments and enterprises.
Details
Keywords
Zhihong Li, Yongzhong Sha, Xuping Song, Kehu Yang, Kun ZHao, Zhixin Jiang and Qingxia Zhang
Risk perception is an essential factor affecting how individuals evaluate risk, make decisions and behave. The impact of risk perception on customer purchase behavior has…
Abstract
Purpose
Risk perception is an essential factor affecting how individuals evaluate risk, make decisions and behave. The impact of risk perception on customer purchase behavior has been widely studied; however, the association has been debated. Therefore, the purpose of this paper is to examine the relationship between risk perception and customer purchase behavior and to examine factors that could moderate it.
Design/methodology/approach
This study conducted a meta-analysis of this relationship and examined factors that could moderate it. Six databases were comprehensively searched. Two reviewers independently selected the studies for inclusion, extracted data and assessed quality. Pearson's r was used as the effect estimate. A total of 33 studies were included in the meta-analysis.
Findings
The results revealed a negative relationship between risk perception and customer purchase behavior. The geographical region, purchase channel and country development level affected the relationship. The correlation between perceived risk and purchase behavior in European consumers was the highest, followed by the correlation in American consumers; the weakest correlation was found in Asian consumers. For consumers in developed countries, perceived risk had a stronger negative influence on customer purchase behavior than that for consumers in developing countries. The perceived risk of online purchase channels had a stronger negative impact on customer purchase behavior than that of offline purchase channels.
Research limitations/implications
Risk perception is a useful context in which to explain barriers to customer purchase behavior. In addition, reducing consumers’ risk perception and perfecting the market transaction process with respect to buying behavior should be further studied.
Originality/value
The findings of this review indicate a direct negative relationship between risk perception and customer purchase behavior. To the best of the authors’ knowledge, this review is the first to meta-analytically summarize the impact of risk perception on customer purchase behavior in social sciences research, and it also illuminates new perspectives for future studies.
Details
Keywords
Zhihong Gao, Na Li and Elaine A. Scorpio
The purpose of this paper is to explore the link between consumer psychology and puffery law in China and the USA, by reporting two empirical studies that investigated…
Abstract
Purpose
The purpose of this paper is to explore the link between consumer psychology and puffery law in China and the USA, by reporting two empirical studies that investigated whether puff claims had different effects on Chinese and US college students in their perception of advertising truthfulness, brand attitude, and purchase intent.
Design/methodology/approach
The first study tested the six levels of puffery, identified by Preston, with two products, cane sugar and bottled spring water. The second study employed four products to test the interaction effects of product type and the “best” puff claim.
Findings
It was found that puffery had very limited effects on the participants' brand attitude and purchase intent, and the Chinese consistently reported higher purchase intent than the Americans.
Research limitations/implications
The studies had two primary limitations. First, all the participants were college students. Future studies may want to sample the general population and further examine how factors such as age, education, social class, and product experience influence the perception of puffery. Second, to strive for cross‐cultural equivalence, the ad stimuli used consisted of very simple designs and focused solely on puff claims without much context. The findings outline a possible roadmap to regulatory harmonization based on consumer psychology, which bridges the sharp divide between the two models of puffery regulation represented by China and the USA.
Originality/value
Previous empirical studies on the effects of puffery were all confined to the US context. The paper is the first effort to investigate the effects of puffery in a cross‐cultural context.
Details