Search results

1 – 10 of 10
Article
Publication date: 23 April 2024

Zhenbao Wang, Zhen Yang, Mengyu Liu, Ziqin Meng, Xuecheng Sun, Huang Yong, Xun Sun and Xiang Lv

Microribbon with meander type based on giant magnetoimpedance (GMI) effect has become a research hot spot due to their higher sensitivity and spatial resolution. The purpose of…

Abstract

Purpose

Microribbon with meander type based on giant magnetoimpedance (GMI) effect has become a research hot spot due to their higher sensitivity and spatial resolution. The purpose of this paper is to further optimize the line spacing to improve the performance of meanders for sensor application.

Design/methodology/approach

The model of GMI effect of microribbon with meander type is established. The effect of line spacing (Ls) on GMI behavior in meanders is analyzed systematically.

Findings

Comparison of theory and experiment indicates that decreasing the line spacing increases the negative mutual inductance and a consequent increase in the GMI effect. The maximum value of the GMI ratio increases from 69% to 91.8% (simulation results) and 16.9% to 51.4% (experimental results) when the line spacing is reduced from 400 to 50 µm. The contribution of line spacing versus line width to the GMI ratio of microribbon with meander type was contrasted. This behavior of the GMI ratio is dominated by the overall negative contribution of the mutual inductance.

Originality/value

This paper explores the effect of line spacing on the GMI ratio of meander type by comparing the simulation results with the experimental results. The superior line spacing is found in the identical sensing area. The findings will contribute to the design of high-performance micropatterned ribbon with meander-type GMI sensors and the establishment of a ribbon-based magnetic-sensitive biosensing system.

Details

Sensor Review, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0260-2288

Keywords

Article
Publication date: 15 February 2023

Bing Yang

Motivated by the real-world practice that the boom of the online selling induces a higher product return as well, selecting which online channel mode indicates who takes ownership…

Abstract

Purpose

Motivated by the real-world practice that the boom of the online selling induces a higher product return as well, selecting which online channel mode indicates who takes ownership over the product and thus bears the loss of the product return. This paper aims to seek the optimal online channel modes for the two members in a platform supply chain in the presence of product returns.

Design/methodology/approach

This study aims to develop a platform supply chain that consists of one platform company and one supplier. Along with an offline distribution channel, the supplier can choose two alternative online selling modes (i.e. the reselling and agency modes) to sell its product through the online marketplace. This paper applies Stackelberg game to derive the equilibrium with different business scenarios and selects the optimal online channel modes for two parties, respectively. Moreover, this paper extends to a different supply chain with a reverse channel leadership and a different product return policy for testing the robustness.

Findings

Several interesting and important results are derived in this paper. Firstly, it is found that the relative pricing are largely relied on the costs of two channels. Secondly, the platform supply chain may benefit from a pure channel rather than the dual-channel when this channel enjoys a relatively low cost and/or a sufficiently high consumer preference. Then, the platform and the supplier act contradictorily when selecting their optimal online channel modes. To be specific, the platform motivates to choose the online reselling mode when both the commission rate and the slotting fee are relatively low, whereas the supplier is likely to select the online agency mode under this circumstance. Finally, a win-win situation in regards to the optimal online channel mode for two parties is achievable with numerical experiments.

Practical implications

Based on the analytical studies, the results derived in the authors’ work can provide managerial insights to assist the supplier and the platform company in determining the operational decision and selecting the optimal online channel mode to deal with consumer returns. In addition, appropriate commission rate along with slotting fee will make both parties achieve a win-win situation in determining their optimal online channel mode.

Originality/value

To the authors’ best knowledge, this paper makes the first move to determine the optimal online channel mode in the content of consumer returns and study how it is affected by different product return policies.

Details

Kybernetes, vol. 53 no. 5
Type: Research Article
ISSN: 0368-492X

Keywords

Article
Publication date: 5 April 2024

Yiwei Zhang, Daochun Li, Zi Kan, Zhuoer Yao and Jinwu Xiang

This paper aims to propose a novel control scheme and offer a control parameter optimizer to achieve better automatic carrier landing. Carrier landing is a challenging work…

Abstract

Purpose

This paper aims to propose a novel control scheme and offer a control parameter optimizer to achieve better automatic carrier landing. Carrier landing is a challenging work because of the severe sea conditions, high demand for accuracy and non-linearity and maneuvering coupling of the aircraft. Consequently, the automatic carrier landing system raises the need for a control scheme that combines high robustness, rapidity and accuracy. In addition, to exploit the capability of the proposed control scheme and alleviate the difficulty of manual parameter tuning, a control parameter optimizer is constructed.

Design/methodology/approach

A novel reference model is constructed by considering the desired state and the actual state as constrained generalized relative motion, which works as a virtual terminal spring-damper system. An improved particle swarm optimization algorithm with dynamic boundary adjustment and Pareto set analysis is introduced to optimize the control parameters.

Findings

The control parameter optimizer makes it efficient and effective to obtain well-tuned control parameters. Furthermore, the proposed control scheme with the optimized parameters can achieve safe carrier landings under various severe sea conditions.

Originality/value

The proposed control scheme shows stronger robustness, accuracy and rapidity than sliding-mode control and Proportion-integration-differentiation (PID). Also, the small number and efficiency of control parameters make this paper realize the first simultaneous optimization of all control parameters in the field of flight control.

Details

Aircraft Engineering and Aerospace Technology, vol. 96 no. 3
Type: Research Article
ISSN: 1748-8842

Keywords

Article
Publication date: 19 December 2022

Xiaojie Xu and Yun Zhang

Understandings of house prices and their interrelationships have undoubtedly drawn a great amount of attention from various market participants. This study aims to investigate the…

Abstract

Purpose

Understandings of house prices and their interrelationships have undoubtedly drawn a great amount of attention from various market participants. This study aims to investigate the monthly newly-built residential house price indices of seventy Chinese cities during a 10-year period spanning January 2011–December 2020 for understandings of issues related to their interdependence and synchronizations.

Design/methodology/approach

Analysis here is facilitated through network analysis together with topological and hierarchical characterizations of price comovements.

Findings

This study determines eight sectoral groups of cities whose house price indices are directly connected and the price synchronization within each group is higher than that at the national level, although each shows rather idiosyncratic patterns. Degrees of house price comovements are generally lower starting from 2018 at the national level and for the eight sectoral groups. Similarly, this study finds that the synchronization intensity associated with the house price index of each city generally switches to a lower level starting from early 2019.

Originality/value

Results here should be of use to policy design and analysis aiming at housing market evaluations and monitoring.

Details

International Journal of Housing Markets and Analysis, vol. 17 no. 3
Type: Research Article
ISSN: 1753-8270

Keywords

Article
Publication date: 2 February 2022

Fangxuan (Sam) Li, Jianan Ma and Yun Tong

This study aims to explore tourism live streamers’ motivations of sharing their travel experiences based on the grounded theory.

2090

Abstract

Purpose

This study aims to explore tourism live streamers’ motivations of sharing their travel experiences based on the grounded theory.

Design/methodology/approach

The use of purposive and snowball sampling methods was used to conduct 22 in-depth semi-structured interviews. The manuscript was analyzed based on the grounded theory.

Findings

This study identifies five tourism live streamers’ motivations of sharing their travel experience, including information sharing, entertainment, self-presentation, monetary incentives and socialization. Information sharing and entertainment are identified as the most important motivations of travel livestreaming (TLS) among the motivations. Monetary incentive is identified as a new motivation for tourism live streamers compared to other social media users.

Research limitations/implications

This study provides valuable suggestions for livestreaming platforms and tourism product providers to attract more tourism live streamers and better serve them.

Originality/value

To the best of the authors’ knowledge, this is one of the first studies to offer empirical findings and discussions on tourism live streamers’ motivations of sharing their travel experiences.

目的

本研究旨在基于扎根理论探讨旅游直播主分享旅游体验的动机。

设计/方法

使用目的性和滚雪球抽样方法进行了22个深入的半结构化访谈。 本研究采用扎根理论对数据进行分析。

发现

本研究发现了五种旅游直播主分享旅游体验的动机, 包括信息共享、娱乐、自我展示、金钱激励和社交。信息共享和娱乐被认为是旅游直播最重要的动机。与其他社交媒体的用户相比, 货币激励被认为是旅游直播的新动机。

研究意义

本研究为直播平台和旅游产品提供商提供有用的建议, 以吸引更多的旅游直播者并更好地为他们服务。

创意/价值

这是对旅游直播主分享旅游体验的动机提供实证研究结果和讨论的首批研究之一。

Propósito

este estudio tiene como objetivo explorar las motivaciones de los transmisores en vivo del turismo para compartir sus experiencias de viaje según la teoría fundamentada.

Diseño/metodología/enfoque

Des méthodes d'échantillonnage raisonné et boule de neige ont été utilisées pour mener 22 entrevues semi-structurées approfondies. Le manuscrit a été analysé sur la base de la théorie ancrée.

Hallazgos

este estudio identifica las motivaciones de cinco transmisores en vivo del turismo para compartir su experiencia de viaje, incluido el intercambio de información, el entretenimiento, la autopresentación, los incentivos monetarios y la socialización. El intercambio de información y el entretenimiento se identifican como las motivaciones más importantes de la transmisión en vivo de viajes (TLS) entre las motivaciones. El incentivo monetario se identifica como una nueva motivación para el transmisor en vivo del turismo en comparación con los usuarios de otras redes sociales.

Limitaciones/implicaciones de la investigación

este estudio proporciona sugerencias útiles para que las plataformas de transmisión en vivo y los proveedores de productos turísticos atraigan a más transmisores turísticos en vivo y les brinden un mejor servicio.

Originalidad/valor

este es uno de los primeros estudios que ofrece hallazgos empíricos y debates sobre las motivaciones de los transmisores en vivo del turismo para compartir sus experiencias de viaje.

Article
Publication date: 21 November 2023

Pham Duc Tai, Krit Jinawat and Jirachai Buddhakulsomsiri

Distribution network design involves a set of strategic decisions in supply chains because of their long-term impacts on the total logistics cost and environment. To incorporate a…

Abstract

Purpose

Distribution network design involves a set of strategic decisions in supply chains because of their long-term impacts on the total logistics cost and environment. To incorporate a trade-off between financial and environmental aspects of these decisions, this paper aims to determine an optimal location, among candidate locations, of a new logistics center, its capacity, as well as optimal network flows for an existing distribution network, while concurrently minimizing the total logistics cost and gas emission. In addition, uncertainty in transportation and warehousing costs are considered.

Design/methodology/approach

The problem is formulated as a fuzzy multiobjective mathematical model. The effectiveness of this model is demonstrated using an industrial case study. The problem instance is a four-echelon distribution network with 22 products and a planning horizon of 20 periods. The model is solved by using the min–max and augmented ε-constraint methods with CPLEX as the solver. In addition to illustrating model’s applicability, the effect of choosing a new warehouse in the model is investigated through a scenario analysis.

Findings

For the applicability of the model, the results indicate that the augmented ε-constraint approach provides a set of Pareto solutions, which represents the ideal trade-off between the total logistics cost and gas emission. Through a case study problem instance, the augmented ε-constraint approach is recommended for similar network design problems. From a scenario analysis, when the operational cost of the new warehouse is within a specific fraction of the warehousing cost of third-party warehouses, the solution with the new warehouse outperforms that without the new warehouse with respective to financial and environmental objectives.

Originality/value

The proposed model is an effective decision support tool for management, who would like to assess the impact of network planning decisions on the performance of their supply chains with respect to both financial and environmental aspects under uncertainty.

Open Access
Article
Publication date: 22 April 2024

Benjian Wu, Linyi Niu, Ruiqi Tan and Haibo Zhu

This study explores whether targeted microcredit can effectively alleviate households’ multidimensional relative poverty (MdRP) in rural China in the new era following the poverty…

Abstract

Purpose

This study explores whether targeted microcredit can effectively alleviate households’ multidimensional relative poverty (MdRP) in rural China in the new era following the poverty elimination campaign and discusses it from a gendered perspective.

Design/methodology/approach

This study applies a fixed-effects model, propensity score matching (PSM) and two-stage instrumental variable method to two-period panel data collected from 611 households in rural western China in 2018 and 2021 to explore the effects, mechanisms and heterogenous performance of targeted microcredit on households’ MdRP in the new era.

Findings

(i) Targeted microcredit can alleviate MdRP among rural households in the new era, mainly by reducing income and opportunity inequality. (ii) Targeted microcredit can promote women’s empowerment, mainly by enhancing their social participation, thereby helping alleviate households’ MdRP. The effect of the targeted microcredit on MdRP is more significant in medium-educated women households and non-left-behind women households. (iii) The MdRP alleviation effect is stronger in villages with a high degree of digitalization.

Research limitations/implications

Learn from the experience of targeted microcredit. Accurately identify poor groups and integrate loan design into financial health and women empowerment. Particularly, pay attention to less-educated and left-behind women households and strengthen coordination between targeted microcredit and digital village strategies.

Originality/value

This study clarifies the effect of targeted microcredit on women’s empowerment and households’ MdRP alleviation in the new era. It also explores its various effects on households with different female characteristics and regional digitalization levels, providing ideas for optimizing microcredit.

Details

China Agricultural Economic Review, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1756-137X

Keywords

Article
Publication date: 24 April 2024

Yubing Yu, Hongyan Zeng and Min Zhang

Manufacturers increasingly resort to digital transformation to shape their competitiveness in the digital economy era, while supply chain (SC) collaborative innovation helps them…

Abstract

Purpose

Manufacturers increasingly resort to digital transformation to shape their competitiveness in the digital economy era, while supply chain (SC) collaborative innovation helps them cope with market uncertainties. However, whether and how digital transformation can facilitate SC collaborative innovation remain unclear. To address this gap, we aims to investigate the effects of digital transformation (strategy and capability) on SC collaborative (process and product) innovation and market performance.

Design/methodology/approach

We use partial least squares-structural equation modelling (PLS-SEM) with a sample of 210 Chinese manufacturers to investigate the effects of digital transformation (strategy and capability) on SC collaborative (process and product) innovation and market performance.

Findings

The results show that digital strategy and capability positively impact SC collaborative process and product innovation, which enhances market performance. In addition, SC collaborative innovation mediates the relationship between digital transformation and market performance.

Originality/value

This study contributes to the literature by identifying how digital transformation drives SC collaborative innovation towards improving market performance and providing practical guidance for enterprises in promoting digital transformation and SC collaborative innovation.

Details

European Journal of Innovation Management, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1460-1060

Keywords

Article
Publication date: 23 February 2024

Guangwei Liang, Zhiming Gao, Cheng-Man Deng and Wenbin Hu

The purpose of this study is to reveal the effect of nano-Al2O3 particle addition on the nucleation/growth kinetics, microhardness, wear resistance and corrosion resistance of…

Abstract

Purpose

The purpose of this study is to reveal the effect of nano-Al2O3 particle addition on the nucleation/growth kinetics, microhardness, wear resistance and corrosion resistance of Co–P–xAl2O3 nanocomposite plating.

Design/methodology/approach

The kinetics and properties of Co–P–xAl2O3 nanocomposite plating prepared by electroplating were investigated by electrochemical measurements, scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Vickers microhardness measurement, SRV5 friction and wear tester and atomic force microscopy.

Findings

A 12 g/L nano-Al2O3 addition in the plating solution can transform the nucleation/growth kinetics of the plating from the 3D progressive model to the 3D instantaneous model. The microhardness of the plating increased with the increase of nano-Al2O3 content in plating. The wear resistance of the plating did not adhere strictly to Archard’s law. An even and denser corrosion product film was generated due to the finer grains, with a high corrosion resistance.

Originality/value

The effect of different nano-Al2O3 addition on the nucleation/growth kinetics and properties of Co–P–xAl2O3 nanocomposite plating was investigated, and an anticorrosion mechanism of Co–P–xAl2O3 nanocomposite plating was proposed.

Details

Anti-Corrosion Methods and Materials, vol. 71 no. 3
Type: Research Article
ISSN: 0003-5599

Keywords

Article
Publication date: 24 April 2024

Isabella Lucut Capras, Monica Violeta Achim and Eugenia Ramona Mara

Companies avoid taxes in a variety of ways and use different methods to do that, one of the most common being earnings management. The purpose of this paper is to investigate…

Abstract

Purpose

Companies avoid taxes in a variety of ways and use different methods to do that, one of the most common being earnings management. The purpose of this paper is to investigate whether companies manipulate their financial data in order to reduce taxes paid.

Design/methodology/approach

We considered a sample of 63 listed Romanian companies for the period 2016–2021. The Beneish model was used for estimating earnings management, and the effective tax rate was used to measure tax avoidance. The analysis was carried out using regression analysis in Stata13 software.

Findings

The findings of the research indicate a negative and statistically significant association between effective tax rate and earnings management, implying that one of the main reasons why companies manipulate their earnings to reduce tax burden and avoid taxes. Moreover, our results show that return on assets (ROA) has a statistically significant negative influence on the effective tax rate. Furthermore, our analysis reveals that firm size, growth, and Big4 audit have no effect on effective tax rate.

Research limitations/implications

Because it analyzes concrete cases using financial data and provides some recommendations for addressing the issue of tax avoidance, this work is useful in advancing both quantitative and qualitative research on this topic. This research is relevant for businesses, governments, regulators, audit professionals and investors.

Originality/value

The study, by analyzing concrete cases using reported financial data, contributes in filling the gap within the literature that results from a lack of scientific research on the relationship between tax avoidance and earnings management, and then it clarifies the nature of the causal connection between them. Moreover, it considers a combination of firm related variables including performance, size and also audit quality.

Details

The Journal of Risk Finance, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1526-5943

Keywords

1 – 10 of 10