Search results

The design issues on network architecture and modulation scheme that can be used to implement reliable MIL‐STD‐1773 avionics optical fiber data buses are discussed. Both single‐star and multi‐star architectures are presented to such optical fiber data buses. Several network configurations based on passive and/or active coupling components are also considered, and they are compared in terms of system complexity and reliability. Moreover, three modulation schemes are presented, i.e. partial trilevel Manchester II bi‐phase coding, extended Manchester II bi‐phase coding with beginning‐stopping flags, and pseudo‐four‐ary pulse width modulation, respectively. Their use can feasibly solve the problem associated with fast identification of correct operation states of an active transmitter at the output of optical receivers.

The uncertainty of the interval variable is represented by interval factor, and the interval variable is described as its mean value multiplied by its interval factor. Based on interval arithmetic rules, an analytical method of interval finite element for uncertain structures but not probabilistic structure or fuzzy structure is presented by combining the interval analysis with finite element method. The static analysis of truss with interval parameters under interval load is studied and the expressions of structural interval displacement response and stress response are deduced. The influences of uncertainty of one of structural parameters or load on the displacement and stress of the structure are examined through examples and some significant conclusions are obtained.

The purpose of this paper is to study the influence of alkyl chain length and kind of anions of ionic liquids on the tribological properties with different materials as friction pairs (steel-aluminum, steel-copper and steel-Si3N4 ceramic).

Tribological properties were evaluated by an optimol-SRV-IV reciprocation friction tester with a ball-on-block configuration at room temperature and high temperature, respectively. Friction-reducing and anti-wear properties of the ionic liquids for steel/aluminum, steel/copper and steel/ceramic contacts were evaluated on the ball-on-block reciprocating UMT-2MT tribometer. The morphologies of the worn surfaces were observed by a scanning electron microscope. The chemical states of several typical elements on the worn surfaces were examined by X-ray photoelectron spectroscopy.

Both the alkyl chain length and kind of anion influence the tribological properties of ionic liquids, especially for the length of alkyl chains. With the increase of alkyl chain length, the load carrying capacity of ionic liquids is improved at both room temperature and high temperature, and the friction reducing and antiwear behaviors are also significantly enhanced.

The paper presents potentially useful and highly efficient lubricants.

Owing to their good friction-reducing and wear resistance properties, these ionic liquids are promising candidates for versatile applications.

This work might provide a promising research direction for design and application of ionic liquids as lubricants.

This paper explores the impact of both government subsidies and decision makers' loss-averse behavior on the determination of transportation build-operate-transfer (BOT) concession periods based on cumulative prospect theory (CPT). The prospect value of a transportation project under traffic risk can be formulated according to the value function for gains and losses and the decision weight for gains and losses. As an extra income for investors, government subsidy is designed for highly risky aspects of BOT transportation projects: uncertain initial traffic volumes and fluctuating growth rates.

A decision-making model determining the concession period of a transportation BOT project is proposed by using the Monte-Carlo simulation method based on CPT, and the effects of risky behaviors of private investors on concession period decision making are analyzed. A subsidy method related to the internal rate-of-return (IRR) corresponding to a specific initial traffic volume and growth rate is proposed. The case of an actual BOT highway project is examined to illustrate how the method proposed can be used to determine the concession period of a transportation BOT project considering decision makers' loss-averse behavior and government subsidy. Contingency analysis is discussed to cope with possible misestimating of key factors such as initial traffic volume and cost coefficients. Sensitivity analysis is employed to investigate the impact of CPT parameters on the concession period decisions. An actual BOT case which failed to attract private capital is introduced to show the practical application. The results are then interpreted to conclude this paper.

Based on comparisons drawn between a concession period decision-making model considering the psychological behaviors of decision makers and a model not considering them, the authors conclude that the concession period based on CPT is distinctly different from that of the loss-neutral model. The concession period based on CPT is longer than the loss-neutral concession period. That is, loss-averse private investors tend to ask for long concession periods to make up for losses they will face in the future. Government subsidies serve as extra income for investors, allowing appointed profits to be secured sooner. For the benefit side of contingency variables, the normal state of initial traffic volume, average annual traffic growth rate and bias degree and the government subsidy need to be paid close attention during the project life span. For the cost side of contingency variables, the annual operating cost variable has a significant impact on the length of predicted concession period, while the large-scale cost variable has minor impact.

With an actual BOT highway project, the determination of transportation BOT concession periods based on the psychological behaviors of decision makers is analyzed in this paper. As the psychological behaviors of decision makers heavily impact the decision-making process, the authors analyze their impacts on concession period decision making. Government subsidy is specifically designed for various states of initial traffic volume and fluctuating growth rates to cope with corresponding high risks and mitigate private investors' loss-averse behaviors. Contingency analysis and sensitivity analysis are discussed as the estimated values of parameters may not be authentic in actual situations.

In this paper, with the goal of reducing the fuel consumption of UAV, the engine performance optimization is studied and on the basis of aircraft/engine integrated control, the minimum fuel consumption optimization method of engine given thrust is proposed. In the case of keeping the given thrust of the engine unchanged, the main fuel flow of the engine without being connected to the afterburner is optimally controlled so as to minimize the fuel consumption.

In this study, the reference model real-time optimization control method is adopted. The engine reference model uses a nonlinear real-time mathematical model of a certain engine component method. The quasi-Newton method is adopted in the optimization algorithm. According to the optimization variable nozzle area, the turbine drop-pressure ratio corresponding to the optimized nozzle area is calculated, which is superimposed with the difference of the drop-pressure ratio of the conventional control plan and output to the conventional nozzle controller of the engine. The nozzle area is controlled by the conventional nozzle controller.

The engine real-time minimum fuel consumption optimization control method studied in this study can significantly reduce the engine fuel consumption rate under a given thrust. At the work point, this is a low-altitude large Mach work point, which is relatively close to the edge of the flight envelope. Before turning on the optimization controller, the fuel consumption is 0.8124 kg/s. After turning on the optimization controller, you can see that the fuel supply has decreased by about 4%. At this time, the speed of the high-pressure rotor is about 94% and the temperature after the turbine can remain stable all the time.

The optimal control method of minimum fuel consumption for the given thrust of UAV is proposed in this paper and the optimal control is carried out for the nozzle area of the engine. At the same time, a method is proposed to indirectly control the nozzle area by changing the turbine pressure ratio. The relevant UAV and its power plant designers and developers may consider the results of this study to reach a feasible solution to reduce the fuel consumption of UAV.

Fuel consumption optimization can save fuel consumption during aircraft cruising, increase the economy of commercial aircraft and improve the combat radius of military aircraft. With the increasingly wide application of UAVs in military and civilian fields, the demand for energy-saving and emission reduction will promote the UAV industry to improve the awareness of environmental protection and reduce the cost of UAV use and operation.

The purpose of this paper is to study the corrosion behaviors of X70 steel under direct current (DC) interference at 0-1,200 A/m² in simulated soil solution.

The Tafel polarization curves of X70 steel under DC interference were tested using electrochemical method, the corrosion rate was calculated using weight-loss method and the change in steel surface was analyzed by optical microscopy.

The results showed that E-I polarization curves under 200-1,200 A/m² interference were linear; with an increase in the DC density, the corrosion potential of X70 steel shifted positively, solution pH after the weight-loss tests increased and corrosion rate increased linearly. A mathematical relationship between polarization resistance Rp and current density was established. Corrosion morphology indicated that pitting corrosion and crevice corrosion occurred on the X70 steel under DC interference in simulated soil solution.

All tests were conducted at a relative higher DC density (200-1,200 A/m²). The linear fitting method is proposed to fit data of Tafel polarization curves under DC interference. This study provides guidelines for safe operation of X70 steel pipelines.

Examines the tenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

The purpose of this paper is to illustrate the usefulness and results of applying web mining as extensions of data mining.

Web mining is performed using three selected software to databases related to customer survey, marketing campaign data, and web site usage. The three selected software are PolyAnalyst^® of Megaputer Intelligence, Inc., SPSS Clementine^®, and ClickTracks by Web Analytics.

This paper discusses and compares the web mining technologies used by the selected software as applied to text, web, and click stream data.

The limitations include the availability of databases and software to perform the web mining. The implications include that this methodology can be extended to other databases.

The methodology used in this paper could be representative of that used for managers to manage their relationships with customers, their marketing campaigns, and their web site activities.

PolyAnalyst is applied to analyze text data of actual written hotel comments. SPSS Clementine is applied to customer web data collected in response to several different marketing campaigns, including age, gender, and income. ClickTracks is applied to click‐stream data for Bob's Fruit web site to generate click fraud report, search report with revenues, pay‐per‐click, and search keywords for all visitors.

Franchising develops quickly in the hotel industry with the expansion and globalization of hotel chains, as it brings about advantages and sets up a very good leverage between two parties – franchisor and franchisee. Major multinational hotel corporations have entered China, but franchising is seldom used as a tool of expansion there. The continuous increase in tourism and the structural change in the hotel industry in China afford more opportunities for the growth of franchising operations and also of indigenous hotel chains. When franchising in this specific market, quality control, ownership, connection, business tradition and franchisor‐franchisee relationships should be examined carefully in order to ensure success. A full understanding of China’s peculiar social, cultural, economic and political context is essential for foreign companies, whilst existing and new indigenous companies require greater technical and operating expertise along with the necessary business acumen to operate hotel chains.