Search results

The purpose of this paper is to analyze zero valent iron nanoparticles (NZVIs) by a novel green method, taken from Thymus vulgaris (TV) plant extract, were synthesized and applied to degrade reactive black 5 (RB5) azo dye.

The optimum conditions for the highest removal of RB5 dye were determined. Characterization of NZVIs was done by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The NZVIs were used for the removal of dye RB5, and the parameters affecting were discussed like pH, initial concentration, contact time and NZVIs dosage.

The characterization results of NZVIs by SEM, TEM, FTIR and XRD show that polyphenols, organic acids and proteins reduce not only the green synthesis of NZVIs but also the aggregation of nanoparticles. The maximum dye removal efficiency of 99.6 per cent occurred at pH 4, NZVIs dose of 600 mg/L, and contact time of 5 min. The adsorption of RB5 dye onto the NZVIs surface and scavenging of the azo bond (−N = N) by the strong reduction of NZVIs were the proposed mechanisms for dye removal. The application of NZVIs to treat wastewater containing reactive dye shows high degradation efficiency.

The findings may greatly benefit the application of the NZVIs taken from Thymus vulgaris (TV) in the fields of dye adsorption.

The present study is novel because it incorporated the morphological and structural properties of the synthesized NZVIs using a native plant of Iran and studied the capability of green-synthesized NZVIs to remove RB5 as a water contaminant.

The native plant presented here can be developed for reduced environmental pollution before discharge to accepted water.

The NZVIs is prepared via green-synthesized method, which is prepared with leaves of TV. There are two main innovations. One is that the novel NZVIs is prepared successfully by native plant via green-synthesized method. The other is that the optimized conditions were obtained for the removal of RB5 dye as a water contaminant. Furthermore, to the best of our knowledge, no study has ever investigated the removal of RB5 by NZVIs produced using a native plant in Iran.

The purpose of this paper is to analyze nano zero-valent iron (nZVI)-activated carbon/Nickel (nZVI-AC/Ni) by a novel method. The synthesized adsorbent was used to degrade reactive orange 16 (RO 16) azo dye.

The optimum conditions for the highest removal of RO 16 dye were determined. Characterization of nZVI-AC/Ni was done by scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction and energy-dispersive X-ray spectroscopy. The nZVI-AC/Ni were used for the removal of dye RO 16 and the parameters affecting were discussed such as pH, adsorbent dosage, contact time and concentration of dye. To investigate the variables and interaction between them, an analysis of variance test was performed.

The characterization results show that the synthesis of nZVI-AC/Ni caused no aggregation of nanoparticles. The maximum dye removal efficiency of 99.45% occurred at pH 4, the adsorbent dosage = 0.1 gL-1 and the dye concentration of 10 mgL-1. Among various algorithms of feed-forward backpropagation neural network, Levenberg–Marquardt with mean square error (MSE) = 9.86 × 10^–22 in layer = 5 and the number of neurons = 9 was selected as the best algorithm. On the other hand, the MSE of the radial basis function model was 0.2159 indicating the good ability of the model to predict the percentage of dye removal.

There are two main innovations. One is that the novel nZVI-AC/Ni was prepared successfully. The other is that the optimized conditions were obtained for the removal of RO 16 dye from an aqueous solution. Furthermore, to the best of the knowledge, no study has ever investigated the removal of RO 16 by nZVI-AC/Ni produced.

Nanotechnology is nowadays very much successful in producing specifically functionalized nano-sized particles. In this work, copper nanoparticles were prepared by reduction method which is greener and environmentally suitable, cheap and best as compared to other conventional methods, particularly in the context of COVID in globalized world. The formation and size of copper nanoparticles was evidenced by the X-ray diffraction and transmission electron microscopy. The very high surface area of 35–50 m²/gm and very small crystallite sizes of 5–15 nm of these metal nanoparticles is mainly responsible for their effective involvement in removal of carbon dioxide gas as one of major hazardous pollutants from the environment. This chapter, as its main objective, mainly focuses on utility of nano technology and its beneficiary in creating a sustainable environment in economic world. Apart from laboratory experimental procedure and characterizations for preparation of copper nanoparticles, appropriate research methods such as simple statistical, econometric tools and mathematical tools have been used for economic analysis. However, as major findings of the results, developed countries have been successful in maintaining a sustainable human development, in spite of having higher per capita income (PCI) growth as compared to the role of developing countries with lower PCI in this global world.

The aim of this study is to present an overview of sustainable practices in the development of waterproof breathable fabrics for garments. It aims to provide insights into the current state of academic research in this domain and identify and analyze major sustainable trends in the field.

This study conducts a thorough examination of research publications sourced from the Scopus database spanning the years 2013–2023 by employing a systematic approach. The research utilizes both descriptive analysis and content analysis to identify trends, notable journals and leading countries in sustainable waterproof breathable fabric development.

The study reveals a notable increase in studies focusing on sustainable approaches in the development of waterproof breathable fabrics for garments. Descriptive analysis highlights the most prominent journal and leading country in terms of research volume. Content analysis identifies four key trends: minimizing chemical usage, developing easily degradable materials, creating fabrics promoting health and well-being and initiatives to reduce energy consumption.

The main limitation of this research lies in its exclusive reliance on the Scopus database.

The insights derived from this study offer practical guidance for prospective researchers interested in investigating sustainable approaches to developing waterproof breathable fabric for garments. The identified trends provide a foundation for aligning research endeavors with contemporary global perspectives, facilitating the integration of sustainable methodologies into the garment industry.

This systematic literature review contributes original insights by synthesizing current research trends and outlining evolving sustainable practices in the development of waterproof breathable fabrics. The identification of key focus areas adds a novel perspective to existing knowledge.

All those effluent streams having compromised characteristics pose negative effects on the environment either directly or indirectly. Health care facilities and hospitals also generate a large amount of effluent like other industries containing harmful and toxic pharmaceutical residual compounds due to uncontrolled use of drugs, besides others. The occurrence of antibiotic in the environment is of utmost concern due to development of resistant genes. These get mixed up with ground and surface water due to lack of proper treatment of hospital wastewater. The effect of pharmaceutical compounds on human society and ecosystem as a whole is quite obvious. There are no strict laws regarding discharge of hospital effluent in many countries. Contrary to this, the authors do not have appropriate treatment facilities and solution to solve day by day increasing complexity of this problem. Moreover, water discharged from different health facilities having variable concentration often gets mixed with municipal sewage, thus remains partially untreated even after passing from conventional treatment plants. The purpose of this paper is to highlight the occurrences and fate of such harmful compounds, need of proper effluent management system as well as conventionally adopted treatment technologies nowadays all around the globe. This mini-review would introduce the subject, the need of the study, the motivation for the study, aim, objectives of the research and methodology to be adopted for such a study.

Hospital effluents consisting of pathogens, fecal coliforms, Escherichia coli, etc, including phenols, detergents, toxic elements like cyanide and heavy metals such as copper (Cu), iron (Fe), gadolinium (Gd), nickel (Ni), platinum (Pt), among others are commonly detected nowadays. These unwanted compounds along with emerging pollutants are generally not being regulated before getting discharged caused and spread of diseases. Various chemical and biological characteristics of hospital effluents are assessed keeping in the view the threat posed to ecosystem. Several research studies have been done and few are ongoing to explore the different characteristics and compositions of these effluent streams in comparison so as to suggest the suitable conventional treatment techniques and ways to manage the problem. Several antibiotic groups such as ciprofloxacin, ofloxacin, sulfa pyridine, trimethoprim, metronidazole and their metabolites are reported in higher concentration in hospital effluent. The aquatic system also receives a high concentration of pharmaceutical residues more than 14,000 μg/L from treatment plants also and other surface water or even drinking water in Indian cities. Many rivers in southern parts of India receives treated water have detected high concentration drugs and its metabolites. As far as global constraints that need to be discussed, there are only selected pharmaceuticals compounds generally analyzed, issue regarding management and detection based on method of sampling, frequency of analysis and observation, spatial as well as temporal concentration of these concerned micropollutants, accuracy in detecting these compounds, reliability of results and predictions, prioritization and the method of treatment in use for such type of wastewater stream. The complexity of management and treatment as well need to be addressed with following issues at priority: composition and characterization of effluent, compatible and efficient treatment technology that needs to be adopted and the environment risk posed by them. The problem of drugs and its residues was not seen to be reported in latter part of 20th century, but it might be reported locally in some part of globe. This paper covers some aspect about the disposal and regulatory standard around the world toward hospital effluent discharge, its managements and treatment technologies that are adopted and best suitable nowadays various industries and monitoring the efficiencies of existing treatment systems. This mini-review would introduce the subject, the need, the motivation and objectives of the study and methodology can be adopted for such a study.

The compiled review gives a complete view about the types of antibiotics used in different health care facilities, their residue formation, occurrences in different ecosystems, types of regulations or laws available in different counties related to disposal, different type of treatment technologies, innovative combined treatment schemes and future action needed to tackle such type of effluent after its generation. The thesis also highlights the use of certain innovative materials use for the treatment like nanoparticles. It also discusses about the residues impact on the human health as well as their bioaccumulative nature. If the authors relate the past to the current scenario of pharmaceutical compounds (PhACs) in the environment, the authors will certainly notice that many diseases are nowadays not curable by simple previously prescribed Ab. Many research projects have been done in European countries that have shown the risk of such residues like Pills, Sibell, Poseidon, No pills, Neptune, Knappe, Endetech, etc. In the previous section, it was mentioned that there are no stringent laws for hospital wastewater and in many countries, they are mixed with domestic wastewater. Many difficulties are there with this research due to complex analysis, detection of targeted Ab, affecting waterbodies rate of flow, nature of treatment varies with season to season. The way nature is being degraded and harmful effect are being imposed, it is important to take immediate and decisive steps in this area. Wastewater treatment plants (WWTPs) serves as a nursery for antibiotic-resistant systems, hence monitoring with great attention is also needed. Many trials with different treatment process, in combination, were considered. Many countries are paying great attention to this topic by considering the severity of the risk involved in it.

Previous studies by several scientists show that the pharmaceutical residues in the discharged effluent displayed direct toxic effects, and sometimes, detrimental effects in the mixture were also observed. The discharge of untreated effluent from hospitals and pharmaceuticals and personal care products in the natural ecosystem poses a significant threat to human beings. The pharmaceuticals, like antibiotics, in the aquatic environment, accelerate the development of the antibiotic-resistant genes in bacteria, which causes fatal health risks to animals and human beings. Others, like analgesics, are known to affect development in fishes. They also degrade the water quality and may lead to DNA damage, toxicity in lower organisms like daphnia and have the potential to bioaccumulate. A few commonly used nanoadsorbents for water and wastewater treatment along with their specific properties can also be used. The main advantages of them are high adsorption capacity and superior efficiency, their high reusability, synthesis at room temperatures, super magnetism, quantum confinement effect as well as eco-toxicity. This review will focus on the applicability of different nanoscale materials and their uses in treating wastewater polluted by organic and inorganic compounds, heavy metals, bacteria and viruses. Moreover, the use of various nanoadsorbents and nano-based filtration membranes is also examined.

A number of different pharmaceutical residues derived from various activities like production facilities, domestic use and hospitals have been reported earlier to be present in groundwater, effluents and rivers, they include antibiotics, psycho-actives, analgesics, illicit drugs, antihistamine, etc. In past few years environmental scientists are more concerned toward the effluents generated from medical care facilities, community health centers and hospitals. Various chemical and biological characteristics of hospital effluents have been assessed keeping in the view the common threats pose by them to the entire ecosystem. In this study, seven multispecialty hospitals with nonidentical pretreatment were selected for three aspects i.e. conventional wastewater characteristics, high priority pharmaceuticals and microbial analyses. The present work is to evaluate efficacy of advanced wastewater treatment methods with regard to removal of these three aspects from hospital effluents before discharge into a sewage treatment plant (STP). Based on test results, two out of seven treatment technologies, i.e. MBR and CW effectively reducing conventional parameters and pharmaceuticals from secondary and tertiary treatments except regeneration of microbes were observed in tertiary level by these two treatments.

This review has aimed to identify the emerging contaminants, including pharmaceutical residues, highly consumed chemicals that are present in the hospital effluent, along with their physicochemical and biological characteristics. In this, the main objective was to review the occurrences and fate of common drugs and antibiotics present in effluents from hospital wastewaters. As far as global constraints that need to be discussed, there are only selected pharmaceuticals compounds generally analyzed, issue regarding management and detection based on method of sampling, frequency of analysis and observation, spatial as well as temporal concentration of these concerned micropollutants, accuracy in detecting these compounds, reliability of results and predictions, prioritization and the method of treatment in use for such type of wastewater stream are among the major issues (Akter et al., 2012; Ashfaq et al., 2016; García-Mateos et al., 2015; Liu et al., 2014; Mubedi et al., 2013; Prabhasankar et al., 2016; Sun et al., 2016; Suriyanon et al., 2015; Wang et al., 2016; Wen et al., 2004). This paper covers some aspect about the disposal and regulatory standard around the world toward hospital effluent discharge, its managements and treatment technologies that are adopted and best suitable nowadays.

This study many multispecialty hospitals with nonidentical pretreatment were selected for three aspects i.e. conventional wastewater characteristics high priority pharmaceuticals and microbial analyses. The present work is to evaluate efficacy of advanced wastewater treatment methods with regard to removal of these three aspects from hospital effluents before discharge into an STP. Based on test results, two out of different treatment effectively reducing conventional parameters and pharmaceuticals from secondary and tertiary treatments except regeneration of microbes were observed in the tertiary level by these two treatments were studies followed by ozonation and ultraviolet-ray treatment.

Water is a vital natural resource without which life on earth would be impossible. Properties of synthetic dyes like high stability and noxious nature make it difficult to remove them from the effluent. This review focuses on the removal of synthetic dyes using nanoparticles (NPs) based on the adsorption principle.

Adsorption technique is widely used to remove synthetic dyes from their aqueous solution for decades. Synthetic dye removal using NPs is promising, less energy-intensive and has become popular in recent years. NPs are in high demand for treating wastewater using the adsorption principle due to their tiny size and vast surface area. To maximise environmental sustainability, the utilisation of green-produced NPs as efficient catalysts for dye removal has sparked attention amongst scientists.

This review has prioritised research and development of optimal dye removal systems that can be used to efficiently remove a large quantity of dye in a short period while safeguarding the environment and producing fewer harmful by-products. The removal efficiency of synthetic dye using different NPs in wastewater treatment varies mostly between 75% to almost 100%. This review will aid in the scaling up of the wastewater treatment process.

There is a lack of research emphasis on the safe disposal of NPs once the reuse efficiency significantly drops. The relevance of cost analysis is equally critical, yet only a few papers discuss cost-related information.

Comprehensive and planned research in this area can aid in the development of long-term wastewater treatment technology to meet the growing need for safe and reliable water emphasising reuse and desorption efficiency of the NPs.

This study aims to investigation of the guar gum-manganese dioxide (GG/MnO₂) nanocomposite (NC) synthesized using an environment-friendly method and the degradation of reactive yellow (RY 145) dye in the UV system.

Characterization of the GG/MnO₂ NCs were conducted using field emission scanning electron microscopy, X-ray diffraction and Fourier-transform infrared spectroscopy. Experiments were conducted using a 1 L glass reactor coupled with Ultraviolet (UV-C) blue light bulb of wavelength 250 nm and power of 8 W.

The NC (2.25 g/L) displayed high RY 145 dye degradation (81%) with 10 mg/L of concentration at pH 3. The coefficient of determination (R² 0.99) also depicted that the model fits the experimental data. The analysis of variance (ANOVA) showed that the F-values of 464.75, 276.04 and 5.15 are related to the dose of GG/MnO₂ NCs, initial concentration of RY 145 dye and solution pH, respectively.

The GG/MnO₂ NCs followed by photo oxidation process (UV-process) could be used to degrade the RY 145 dye from synthetic wastewater.

There are two main innovations. One is that the novel process is performed successfully for RY 145 dye degradation. The other is that the optimized conditions are obtained by Box–Behnken design. Also, the effects of different variables on the RY 145 dye removal efficiency were investigated.

In addition to agriculture, energy production, and industries, potable water plays a significant role in many fields, further increasing the demand for potable water. Purification and desalination play a major role in meeting the need for clean drinking water. Clean water is necessary in different areas, such as agriculture, industry, food industries, energy generation and in everyday chores.

The authors have used the different search engines like Google Scholar, Web of Science, Scopus and PubMed to find the relevant articles and prepared this mini review.

The various stages of water purification include coagulation and flocculation, coagulation, sedimentation and disinfection, which have been discussed in this mini review. Using nanotechnology in wastewater purification plants can minimize the cost of wastewater treatment plants by combining several conventional procedures into a single package.

In society, we need to avail clean water to meet our everyday, industrial and agricultural needs. Purification of grey water can meet the clean water scarcity and make the environment sustainable.

This mini review will encourage the researchers to find out ways in water remediation to meet the need of pure water in our planet and maintain sustainability.

This study aims to explore the possibility of using magnetic biochar composite (MBCC) derived from Heglig tree bark (HTB) powder (agricultural solid waste) and cobalt ferrite (CoFe₂O₄, CFO) for oil spill removal from seawater surface.

One-pot co-precipitation route was used to synthesize MBCC. The prepared materials were characterized by X-ray diffraction, scanning electron microscopy-energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy. The densities of the prepared materials were also estimated. Crude, diesel engine and gasoline engine oils were used as seawater pollutant models. The gravimetric oil removal (GOR) method was used for removing oil spills from seawater using MBCC as a sorbent material.

The obtained results revealed that the prepared materials (CFO and MBCC) were able to remove the crude oil and its derivatives from the seawater surface. Besides, when the absorbent amount was 0.01 g, the highest GOR values for crude oil (31.96 ± 1.02 g/g) and diesel engine oil (14.83 ± 0.83 g/g) were obtained using MBCC as an absorbent. For gasoline engine oil, the highest GOR (27.84 ± 0.46 g/g) was attained when CFO was used as an absorbent.

Oil spill removal using MBCC derived from cobalt ferrite and HTB. Using tree bark as biomass (eco-friendly, readily available and low-cost) for magnetic biochar preparation also is a promising method for minimizing agricultural solid wastes (e.g. HTB) and obtaining value-added-products.