Search results

The purpose of the paper was to investigate the use of aqueous extract of date palm (Phoenix dactylifera) leaf as a green inhibitor for corrosion of carbon steel in 1M hydrochloric acid (HCl) solution.

Extracts from the date palm were used as the main component of an environmentally friendly corrosion inhibitor for use in HCl pickling processes. Inhibition behavior on carbon steel in HCl was investigated using weight loss measurements, linear and potentiodynamic polarization curves, electrochemical impedance spectroscopy and scanning electron microscopy.

The results show that the extract exhibited good inhibition performance in 1M HCl. The inhibition efficiency increased with increase in the concentration of the inhibitor but decreased with increase in temperature. Inhibition efficiency also was found to increase as immersion time increased. The inhibitive action was due to adsorption of the date palm leaf components on the steel, which was consistent with the Langmuir isotherm.

Date palm leaf extract (DPLE) is an effective inhibitor at room temperature and can be used to protect plain carbon steel from corrosion in HCl solution.

This study provides new information on the inhibiting characteristics of DPLE under specified conditions. The environmentally friendly inhibitor could find possible applications in metal surface anodizing and acid pickling processes.

This work aims to prepare and characterize of protective anticorrosion phosphate-doped polyaniline (PANI) nanocomposite coatings for stainless steel (SS) in chloride solution.

PANI composite coatings were electrodeposited from aqueous sulfuric acid solution containing monomer and Al₂O₃ nanoparticles using cyclic voltammetry technique. Doping by phosphate was done by aging the coated steels for different periods (1–168 h) in phosphate solution. The polymer film composite was investigated by Fourier-transform infrared spectroscopy and scanning electron microscopy techniques. Potential-time, anodic polarization and electrochemical impedance spectroscopy were used to study the protection efficiency of the coatings.

The Al₂O₃ nanoparticles were incorporated into the deposited PANI layer but they decreased the deposition of polymer. The nanoparticles and the phosphate anions enhanced the protective PANI layer for passivation and protection of SS in the chloride solution.

The replacement of counter anions by phosphate ions improved significantly the PANI and its nanocomposite as protective coating of SS in chloride solution.

The purpose of this paper is to investigate the adsorption and corrosion inhibition of two isomeric compounds (C4H5N3) as aminopyrazine (AP) and 2-amino-pyrimidine (2AP) on mild steel (MS) in 0.5 M HCl. The study was a trial to combine experimental and modelling studies and research effect of molecular geometry on inhibition effect of inhibitor molecules.

The thermodynamic, kinetic and quantum parameters were determined. The electrochemical impedance spectroscopy and anodic polarisation measurements were obtained. The scanning electron microscope was used for monitoring electrode surface. The highest occupied molecular orbital, energy of the lowest unoccupied molecular orbital, Mulliken and natural bonding orbital charges on the backbone atoms, absolute electronegativity, absolute hardness were calculated by density functional theory (DFT)/B3LYP/6-311G (++ d,p).

Results showed that AP and 2AP suppressed the corrosion rate of MS. The corrosion current values were 0.530, 0.050 and 0.016 mA cm-2 in HCl, AP and 2AP containing HCl solutions, respectively. It was illustrated with the blocked fraction of the MS surface by adsorption of inhibitors which obeyed the Langmuir isotherm. The inhibition efficiency follows the order: 2AP > AP which is in agreement with experimental and quantum results.

This paper provides lay a bridge on the molecular geometry and inhibition efficiency by electrochemical tests and modelling study. The inhibition effect of AP and 2AP has not been compared with each other, neither experimentally nor theoretically. This study put forward possible application of 2AP as corrosion inhibitor especially for closed-circuit systems.

This paper aims to study the corrosion inhibition of Methyl 2-(benzamido)-2-(4-phenyl-1H-1,2,3-triazol-1-yl) acetate (MBPTA) and Methyl 2-(benzamido)-2-(4-p-tolyl-1H-1,2,3-triazol-1-yl) acetate (MBTTA) in 1 M H2SO4 solution at 25 °C.

The authors have used weight loss measurements, electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, FT-IR, quantum chemical calculations and scanning electron microscopy (SEM) techniques.

The polarization measurements indicate that both compounds are mixed type inhibitors, and that MBTTA is more effective than MBPTA. The effect of temperature on the corrosion behavior using optimal concentration of MBTTA and MBPTA was studied in the temperature range 298-328 K. SEM was used to examine the morphology of the metal surface. Thermodynamic parameters were calculated and discussed. Monte Carlo simulations were applied to lookup for the most stalls configuration and adsorption energy for the interaction of inhibitors on Fe (1 1 1) interface. The difference in inhibition efficiencies between the two organic inhibitors can be clearly explained in terms of frontier molecular orbital theory.

The authors report on the comparative inhibiting effect of two new 1,4-disubstituted 1,2,3-triazoles, namely Methyl 2-(benzamido)-2-(4-phenyl-1H-1,2,3-triazol-1-yl) acetate (MBPTA) and Methyl 2-(benzamido)-2-(4-p-tolyl-1H-1, 2, 3-triazol-1-yl) acetate (MBTTA) on mild steel corrosion in 1 M H₂SO₄ solution.

Study of corrosion behaviour could benefit from quantum chemical calculation to investigate the role of adsorption of main anions such as OH⁻ and Cl⁻ on metallic surfaces. The purpose of this study is to report the quantum chemical study of aluminium immersed in NaOH, NaCl and HCl solutions and verifying the calculations by potentiodynamic and open-circuit potential (OCP) measurements.

The electrochemical evaluations based on potentiodynamic polarization and OCP experiments were carried out. For theoretical investigations, the quantum chemical calculation was performed. In this regard, the adsorption of Cl⁻, OH⁻ and H⁺ on aluminium surface was investigated. Furthermore, the natural bond orbital for the direction and magnitude of charge transfer interactions was calculated.

The calculations indicate that higher interaction energy between ions with the metallic cluster being modelled together with natural bond orbital calculations of direction and magnitude of charge transfer accurately predicts corrosion.

This paper shows that ions such as Cl⁻, OH⁻ and H⁺ cause the corrosion of aluminium in NaOH, NaCl and HCl environments. The overall theoretical data corroborate with experimental results.

The purpose of this paper is to study the adsorption properties of a proven traditional medicine of West Africa origin, Alstonia boonei with an attempt to evaluate its application in the corrosion protection of mild steel in 5 M H₂SO₄ and 5 M HCl.

Phytochemical screening and Fourier transform infrared spectroscopy analysis were used to characterize the methanolic extract of the plant. Gravimetry, gasometry and electrochemical techniques were used in the corrosion inhibition studies of the extract and computational studies were used to describe the electronic and adsorption properties of eugenol, the most abundant phytochemical in Alstonia boonei.

The extract acted as a mixed-type inhibitor in both acidic solutions, with improved inhibition efficiency achieved with increasing concentration. While the efficiency increased with temperature for the HCl system, it decreased for the H₂SO₄ system. The mechanism of adsorption proposed for Alstonia boonei was chemisorption in the HCl system and physisorption in the H₂SO₄ system, and the adsorptions obeyed Langmuir isotherm at low temperatures. Computational parameters showed that eugenol, being a representative of Alstonia boonei, possesses excellent adsorption properties and has the potential to compete with other established plant-based corrosion inhibitors.

As opposed to pure compounds with distinctive corrosion effects, plant extracts are generally composed of a myriad of phytoconstituents that competitively promote or inhibit the corrosion process and their net effect is evident as inhibition efficiencies. This is, therefore, the main research limitation associated with the corrosion inhibition study of Alstonia boonei.

Being very rich in antioxidant properties by its proven curative and preventive effects for diseases, the interest was stimulated towards the attractive results that abound from its corrosion protection of metals via its anti-oxidation route.

This study aims to investigate the fatigue crack propagation behavior of SiC particle-reinforced 2124 Al alloy composites under constant amplitude axial loading at a stress ratio of R = 0.1. For this purpose, it is performed experiments and comparatively analyze the results by producing 5, 10, 15 Vol.% SiCp-reinforced composites and unreinforced 2124 Al alloy billets with powder metallurgy (PM) production technique.

With the PM production technique, SiCp-reinforced composite and unreinforced 2124 Al alloy billets were produced at 5%, 10%, 15% volume ratios. After the produced billets were extruded and 5 mm thick plates were formed, tensile and fatigue crack propagation compact tensile (CT) samples were prepared. Optical microscope examinations were carried out to determine the microstructural properties of billet and samples. To determine the SiC particle–matrix interactions due to the composite microstructure, unlike the Al alloy, which affects the crack initiation life and crack propagation rate, detailed scanning electron microscopy (SEM) studies have been carried out.

Optical microscope examinations for the determination of the microstructural properties of billet and samples showed that although SiC particles were rarely clustered in the Al alloy matrix, they were generally homogeneously dispersed. Fatigue crack propagation rates were determined experimentally. While the highest crack initiation resistance was achieved at 5% SiC volume ratio, the slowest crack propagation rate in the stable crack propagation region was found in the unreinforced 2124 Al alloy. At volume ratios greater than 5%, the number of crack initiation cycles decreases and the propagation rate increases.

As a requirement of damage tolerance design, the fatigue crack propagation rate and fatigue behavior of materials to be used in high-tech vehicles such as aircraft structural parts should be well characterized. Therefore, safer use of these materials in critical structural parts becomes widespread. In this study, besides measuring fatigue crack propagation rates, the mechanisms causing crack acceleration or deceleration were determined by applying detailed SEM examinations.

The purpose of this paper is to study the inhibition effect of (6-phenyl-3-oxopyridazin-2-yl) acetohydrazide (GP4) on the corrosion of mild steel in acidic medium by gravimetric measurements, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS).

Weight loss measurements, potentiodynamic tests and EIS were performed during this study.

(6-phenyl-3-oxopyridazin-2-yl) acetohydrazide (GP4) was found to be a very efficient inhibitor for mild steel in 1.0 M HCl solution, reaching about 85 per cent with inhibitor concentration 1.0 × 10-3 M at 303 K.

(6-phenyl-3-oxopyridazin-2-yl) acetohydrazide (GP4) was found to play an important role in the corrosion inhibition of mild steel in acidic solution.

This paper is intended to be added to the family of pyridazine derivatives which are highly efficient inhibitors and can be used in the area of corrosion prevention and control.

This study aims to investigate the inhibition performance of an aqueous extract of Matricaria recutita chamomile on the corrosion of S235JR steel in 0.5 M NaCl by using electrochemical impedance spectroscopy (EIS) and polarization measurements.

The inhibition performance was investigated using EIS and polarization measurements. Surface analysis demonstrates the presence of a protective layer on the steel surface in the presence of the extract. Quantum chemical parameters calculated for the molecules contained in the aqueous extract are interpreted to predict the corrosion inhibition efficiency of the considered extract.

The inhibition efficiency of chamomile aqueous extract for S235JR steel increases with increasing amounts of plant concentration and with an increase in the immersion time. The optimal inhibition efficiency of chamomile extract, 98.90 per cent, was achieved for S235JR steel when immersed in 15 per cent v/v of extract concentration for 2 h. The surface analysis in the absence and presence of the chamomile extract confirmed the formation of a protective layer on steel surface. The quantum chemical calculations allowed to explain the great inhibition efficiency values by interpreting the calculated quantum parameters.

This is the first study carrying out an experimental and theoretical investigation on M. recutita chamomile as a green corrosion inhibitor, with interesting potential industrial applications.

Plant development and use as green corrosion inhibitors are already recognized as one of the most environmentally friendly and effective protocols. In recent years, efforts have been made to find green corrosion inhibitors as an alternative to synthetic inhibitors for metals in acid medium. This paper aims to report the investigation of use of aqueous extracts of Tamarindus Indica as green inhibitors for corrosion of metals within different circumstances.

The use of Tamarindus Indica extracts (leaves, stem, fruit pulp and fruit husk) as corrosion inhibitors for mild steel and aluminum in different mediums (HCl, H2SO4, formic acid and citric acid) at different temperatures was investigated.

The inhibitory efficiency of Tamarindus Indica extracts increases with increasing concentration and decreases with increasing temperature. Langmuir is the adsorption isotherm, and the extract (inhibitor) is a mixed-type inhibitor (physisorption and chemisorption).

Tamarindus extracts (leaves, stem, fruit pulp and fruit husk) are effective inhibitors and can be used to protect metals from corrosion at different circumstances.

To the best of the authors’ knowledge, this is the first review that discusses the use of Tamarindus Indica extracts as corrosion inhibitors for metals.