Search results

The purpose of this study is to analyze the effect of foreign direct investment (FDI) on pollution emissions and how environmental regulation affects this relationship.

In the empirical research, the authors selected panel data for 30 provinces in China from 2005 to 2019 as samples. First, the authors used the instrumental variable method to verify the existence of the above hypotheses in China. Then, the authors analyzed the moderating effect of different types of environmental regulations on the environmental effects of FDI. Next, in further discussion, the authors analyzed the difference between the environmental effect and the moderating effect in different time periods and regions, respectively. Finally, the authors discussed whether the different intensities of environmental regulations lead to the transfer effect of FDI in choosing investment destinations.

The result shows that FDI can help reduce pollution emissions and create a “pollution halo” effect, which is enhanced by command-and-control regulation but suppressed by market-based incentives. The heterogeneity analysis reveals that the 18th National Congress of the Communist Party has weakened the pollution halo effect of FDI, while the environmental effect of FDI in the eastern region is not significant, but in the middle and western regions, there is a significant pollution halo effect and a positive moderating effect of environmental regulations. Finally, further analysis reveals that FDI has a transfer effect under command-and-control environmental regulations.

First, the main purpose of this paper is to study the relationship between FDI and pollution emissions from the perspective of heterogeneous environmental regulation. Therefore, there is no detailed discussion on their effect mechanism of them. Second, limited by data, the authors adopt the single index to measure the stringency index of command-and-control and market-based incentive environmental regulations in China. The single index may not be able to fully reflect the intensity of regional environmental regulation, so the construction of a composite indicator is necessary. These shortcomings are the focus of the authors' future research.

Under the guidance of high-quality development, the conclusions above can provide reference for adjusting FDI policies and improving environmental regulation policies.

The innovations in this paper can be summarized as the following four dimensions: First, the authors use the instrumental variable (IV) method to address endogeneity in the relationship between FDI and pollution emission, which can further ensure the robustness of the research results and increases the credibility of the paper. Second, the authors distinguish between two types of environmental regulations to investigate their moderating effect on the environmental impact of FDI. Third, the authors consider the temporal and spatial heterogeneity of both the environmental effects of FDI and the moderating effect of regulation. Last, the authors analyze the spatial spillover of environmental regulation through the study of the transfer effect.

The purpose of this paper is to reveal the dynamic contact characteristics of the slip ring. Dynamic contact resistance models considering wear and self-excited were established based on fractal theory.

The effects of tangential velocity, stiffness and damping coefficient on dynamic contact resistance are studied. The relationships between fractal parameters, wear time and contact parameters are revealed.

The results show that the total contact area decreases with the friction coefficient and fractal roughness under the same load. Self-excited vibration occurs at a low speed (less than 0.6 m/s). It transforms from stick-slip motion at 0.4 m/s to pure sliding at 0.5 m/s. A high stiffness makes contact resistance fluctuate violently, while increasing the damping coefficient can suppress the self-excited vibration and reduce the dynamic contact resistance. The fractal contact resistance model considering wear is established based on the fractal parameters models. The validity of the model is verified by the wear tests.

The results have a great significance to study the electrical contact behavior of conductive slip ring.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-09-2023-0300/

Micro-texture is processed on the surface to reduce the friction of the contact surface, and its application is more and more extensive. The purpose of this paper is to create a texture function model to study the influence of surface parameters on the accuracy of the simulated surface so that it can more accurately reflect the characteristics of the real micro-textured surface.

The microstructure function model of rough surfaces is established based on fractal geometry and polar coordinate theory. The offset angle θ is introduced into the fractal geometry function to make the surface asperity normal perpendicular to the tangent of the surface. The 2D and 3D contour surfaces of the surface groove texture are analyzed by MATLAB simulation. The effects of fractal parameters (D and G) and texture parameter h on the curvature of the surface micro-texture model were studied.

This paper more accurately characterizes the textured 3D curved surface, especially the surface curvature. The scale coefficient G significantly affects curvature, and the influence of fractal dimension D and texture parameters on curvature can be ignored.

The micro-texture model of the rough surface was successfully established, and the range of fractal parameters was determined. It provides a new method for the study of surface micro-texture tribology.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-09-2023-0298/

The purpose of this study is to evaluate the progress and scholarly contributions concerning the effects of COVID-19 on transportation.

Using the SCOPUS database, an analysis was conducted on the output of 733 studies concerning COVID-19 and transportation from 2020 to 2022. Bibliometric visualization techniques were performed, which included funding sponsors, top-cited documents, top journals, top countries, co-authorship of authors, co-citation of authors and keyword analysis.

This study presents diverse findings encompassing influential authors, predominant countries, prominent journals, pivotal papers, funding institutions and affiliations engaged in COVID-19 and transportation research. The research offers a comprehensive assessment of the field’s advancement, addressing existing gaps within the context of limited pertinent literature.

These practical implications highlight how the taxonomical study using bibliometric visualization can inform various aspects of research, policy, practice and decision-making related to COVID-19 and transportation.

The study uses bibliometric visualization techniques to provide a comprehensive overview of existing literature and research trends in COVID-19 and transportation. Its taxonomical approach categorizes the literature systematically, enhancing its originality. The comprehensive analysis contributes to understanding the research landscape, while visualization uncovers new insights. Overall, the study’s unique focus, visualization techniques, taxonomical approach and comprehensive analysis offer originality and potential for new insights in this field.

This study aims to probe the applicability of 2-mercaptobenzothiazole (MBT) functionalized ionic liquids (ILs) as additives in lithium complex grease (LCG) by researching the corrosion inhibiting, rheological and tribological performances.

Electrochemical tests such as electrochemical impedance spectroscopy and potentiodynamic polarization curves were used on Gamry electrochemical workstation to research the corrosion inhibition properties of ILs in 1.0 M HCl corrosive solution. The rheological properties of different grease samples were tested on a rheometer. The tribological properties were investigated on SRV-V oscillating reciprocating friction and wear tester. Scanning electron microscope, X-ray spectrometer and X-ray photoelectron spectrometer were used to characterize the lubricating mechanism.

The 2-MBT functionalized ILs have excellent corrosion inhibition properties. When used as additives in LCG, they both exhibited enhancing effects on thermostability, colloid stability and structural recoverability, and furthermore, outstanding friction-reducing and antiwear properties were also obtained. Surface analysis indicated that the superior lubricating performances of 2-MBT functionalized ILs were mainly ascribed to the formation of tribochemical products on wear tracks, including organic compounds with C–O bond, Fe₂O₃ and FeS₂.

The 2-MBT-based ILs synthesized in this study were multifunctional additives with excellent corrosion inhibiting and tribological properties, which would have a very broad application prospect in lubricating grease industry.

This paper aims to improve the tribological properties of lithium complex greases using nanoparticles to investigate the tribological behavior of single additives (nano-TiO₂ or nano-CeO₂) and composite additives (nano-TiO₂–CeO₂) in lithium complex greases and to analyze the mechanism of their influence using a variety of characterization tools.

The morphology and microstructure of the nanoparticles were characterized by scanning electron microscopy and an X-ray diffractometer. The tribological properties of different nanoparticles, as well as compounded nanoparticles as greases, were evaluated. Average friction coefficients and wear diameters were analyzed. Scanning electron microscopy and three-dimensional topography were used to analyze the surface topography of worn steel balls. The elements present on the worn steel balls’ surface were analyzed using energy-dispersive spectroscopy and X-ray photoelectron spectroscopy.

The results showed that the coefficient of friction (COF) of grease with all three nanoparticles added was low. The grease-containing composite nanoparticles exhibited a lower COF and superior anti-wear properties. The sample displayed its optimal tribological performance when the ratio of TiO₂ to CeO₂ was 6:4, resulting in a 30.5% reduction in the COF and a 29.2% decrease in wear spot diameter compared to the original grease. Additionally, the roughness of the worn spot surface and the maximum depth of the wear mark were significantly reduced.

The main innovation of this study is the first mixing of nano-TiO₂ and nano-CeO₂ with different sizes and properties as compound lithium grease additives to significantly enhance the anti-wear and friction reduction properties of this grease. The results of friction experiments with a single additive are used as a basis to explore the synergistic lubrication mechanism of the compounded nanoparticles. This innovative approach provides a new reference and direction for future research and development of grease additives.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-09-2023-0291/

Because many cutting fluids contain hazardous chemical constituents, industries and researchers are looking for alternative methods to reduce the consumption of cutting fluids in machining operations due to growing awareness of ecological and health issues, government strict environmental regulations and economic pressures. Therefore, the purpose of this study is to raise awareness of the minimum quantity lubrication (MQL) technique as a potential substitute for environmental restricted wet (flooded) machining situations.

The methodology adopted for conducting a review in this study includes four sections: establishment of MQL technique and review of MQL machining performance comparison with dry and wet (flooded) environments; analysis of the past literature to examine MQL turning performance under mono nanofluids (M-NF); MQL turning performance evaluation under hybrid nanofluids (H-NF); and MQL milling, drilling and grinding performance assessment under M-NF and H-NF.

From the extensive review, it has been found that MQL results in lower cutting zone temperature, reduction in cutting forces, enhanced tool life and better machined surface quality compared to dry and wet cutting conditions. Also, MQL under H-NF discloses notably improved tribo-performance due to the synergistic effect caused by the physical encapsulation of spherical nanoparticles between the nanosheets of lamellar structured nanoparticles when compared with M-NF. The findings of this study recommend that MQL with nanofluids can replace dry and flood lubrication conditions for superior machining performance.

Machining under the MQL regime provides a dry, clean, healthy and pollution-free working area, thereby resulting the machining of materials green and environmentally friendly.

This paper describes the suitability of MQL for different machining operations using M-NF and H-NF.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2023-0131/

This study aims to explore the status of collaborative research productivity, major library and information sciences (LIS) research trends and the level of research among the LIS academicians as principal authors in Pakistan during 1975–2021 (47 years).

A quantitative research method was adopted to collect the required data using bibliometric patterns. The data of all faculty members working in LIS schools of Pakistan was collected from the official website of their employers/institutions. Different strategies were used to acquire respondents’ bibliographic/publication records such as faculty members’/employers’ official websites and faculty members’ Google Scholar profiles; advanced searching techniques were also used to retrieve their bibliographic records.

The results revealed that a total of 74 regular faculty members comprising 78.38% males and 21.62% females are working in 12 LIS Pakistani schools. A total of 1,787 papers were produced by LIS faculty, among which 702 were written by Pakistani LIS faculty as principal authors during the selected period. The results revealed that 60.72% of the principal authors’ work was produced in collaboration. The collaboration between faculty members and other faculty was 81%, while two authors' work productivity was on the top. No attention has been given to produce research in collaboration with international/foreign LIS experts, especially from developed countries.

The findings of this study are useful for faculties to have a richer understanding of the various elements of collaboration at national as well as international levels, and then discover the ways to begin and maintain effective partnerships to research emerging trends in LIS.

This study is a unique bibliometric study that systematically and quantitatively combined the research productivity of LIS academicians in Pakistan and provided a holistic sketch of the literature produced on various themes of LIS during 1975–2021.

Insights into how fan experience can be used to cultivate football (soccer) fan loyalty are limited. Based on the stimulus–organism–response (S-O-R) paradigm, this study develops and tests a theoretical model investigating the effects of football-game socialisation, team interest, football interest and transaction satisfaction (stimuli) on fanship and cumulative satisfaction (organism), and subsequently, attitudinal loyalty and behavioural loyalty (response). National culture was a moderator.

A self-administered online survey collected data from a convenience sample of 762 football fans from Brazil, China and Germany.

The PLS-SEM results support the S-O-R based model, indicating that football fan-loyalty behaviours are determined by fanship and cumulative satisfaction with the team. Fan experiences, in turn, are also found to be influenced by fan perceptions relating to socialisation, team interest, football interest and transaction satisfaction—elements over which the football team's management may exert some degree of control. Some national cultural differences were found, with three of the model's 12 structural paths significantly different for Germany vis-à-vis Brazil.

This study advances the authors’ understanding of the significance of socialisation and fan-interest factors for football, providing evidence supporting the role of the fan experience and service-consumption stimuli related to those game experiences as significant drivers (stimuli) of the fan's affective (fanship) and cognitive states (cumulative satisfaction). This study enriches the limited body of evidence on fanship's role as a driver of attitudinal and behavioural loyalty. Finally, the multi-country study partially supports the moderation effect of national culture.