Search results

The purpose of this study is to explore how digital construction policy (DCP) drives enterprise green innovation (EGI) from an information processing theory (IPT) perspective, including the mediating mechanisms of market information accessibility and operational risk, the moderating role of intellectual property protection (IPP) and product market competition (PMC) and the heterogeneous effects of ownership, Internet development and managerial ability.

Based on the matched panel data of A-share listed enterprises from 2011 to 2019 and the Broadband China policy as a quasinatural experiment, this study investigates the impact of DCP on EGI by constructing a multi-time point difference-indifferences (DID) model.

Digital construction policies can significantly promote EGI. DCP works in two fundamental ways, namely by increasing market information accessibility and reducing operational risk. IPP and PMC significantly increased the contribution of digital construction policies to EGI. Heterogeneity analysis found that digital technology has a stronger promotion effect for SOEs, high-managerial-ability enterprises and enterprises in regions with low Internet development levels.

The study provides new insights about the antecedents of EGI from a DCP perspective. It also enlightens emerging economies to actualize green innovation under the digital wave.

From the perspective of IPT, this study explains the mechanism of DCP-driven EGI. It enhances understanding of the relationship between DCP and EGI.

The purpose of this study is investigate the transient aerodynamic characteristics of high-speed vehicle with body roll motion under crosswind condition to improve aerodynamic stability.

An overset mesh was used to simulate the rolling motion of the vehicle body. A wind tunnel experiment was conducted to validate the numerical method.

The results revealed that the vehicle’s aerodynamic characteristics changed periodically with the body’s periodic motion. In the absence of crosswind, the pressure distribution on the left and right sides of the vehicle body was symmetrical, and the speed streamline flowed to the rear of the vehicle in an orderly manner. The maximum aerodynamic lift observed in the transient simulation was −0.089, which is approximately 0.70 times that of the quasi-static simulation experiment. In addition, the maximum aerodynamic side force observed in the transient simulation was 0.654, which is approximately 1.25 times that of the quasi-static simulation experiment.

The aerodynamic load varies periodically with the vehicle body’s cyclic motion. However, the extreme values of the aerodynamic load do not occur when the vehicle body is at its highest or lowest position. This phenomenon is primarily attributed to the mutual interference of airflow viscosity and the hysteresis effect in the flow field, leading to the formation of a substantial vortex near the wheel. Consequently, the aerodynamic coefficient at each horizontal position becomes inconsistent during the periodic rolling of the vehicle body.

The purpose of this paper is to identify the challenges surrounding the implementation of digital technology (DT) agri-food supply chain (AFSC) and explore how these challenges relate to the various sustainability dimensions. Additionally, it aims to assess how these challenges are interconnected in relation to achieving sustainable development goals (SDGs).

The study employs a mixed-method approach utilizing the EFA-ISM-Fuzzy DEMATEL technique. To support and validate the findings, exploratory factor analysis (EFA) categorized 12 critical challenges in sustainable dimensions from 141 participants' responses. Furthermore, interpretive structural modeling (ISM) and decision-making trial and evaluation (DEMATEL) methods were used to obtain the interrelationship and hierarchical structure of the challenges.

The study identified 12 critical challenges while adopting DT in AFSC. These challenges were categorized into four sustainable dimensions: technological, economic, environmental and social. These challenges hinder the achievement of SDGs as well. Lack of regulatory and policy framework with security and privacy issues were the key challenges faced while adopting DT. These observations emphasize the necessity for government and policymakers to prioritize tackling the identified challenges to successfully endorse and execute DT initiatives in AFSC while also fulfilling the SDGs.

The implication underscores the need for collaboration among various stakeholders, such as governments, policymakers, businesses and researchers. By collectively addressing these challenges, DT can be leveraged optimally, fostering sustainable practices and making progress toward achieving the SDGs within the AFSC.

The study uses a combination technique of EFA and ISM-DEMATEL to identify the challenges faced in Indian AFSC while adopting DT and categorizes the interrelation between the challenges along with fulfilling the SDGs.

There has been an increase in research examining whether and how companies disclose climate change impacts and how these disclosures influence capital structure strategies in recent years. However, prior literature has generally focused on developed countries. This paper proposes to examine the impact of voluntary climate change disclosures on corporate financing decisions in an emerging economy.

The dataset includes 335 firm-year observations listed in the Borsa Istanbul (BIST) 100 manufacturing industry firms that participated in the Carbon Disclosure Project (CDP) questionnaire from 2016 to 2020, characterized by high public awareness of greenhouse gas emissions in Turkey. To accomplish this aim, two models have been constructed that link capital structure strategies with voluntary corporate climate change disclosures while controlling for firm-level attributes in terms of size, profitability, market value and free float ratio (FFR).

The significant and negative relationship between the voluntary disclosure of climate-related activities and long-term borrowing is consistent with the arguments that companies with high commitments are unlikely to reduce default risk in emerging markets. This paper also provides empirical evidence that the high size and the level of low profitability magnify this relationship between CDP and financial leverage.

The Paris Agreement seems to be a significant point where corporate lenders have become aware of the commitment of policymakers to fight climate change. The results have significant implications for both managerial strategies and environmental regulatory policy-making issues. In addition, the findings shed light on the strategic behavior of managers in the consideration of climate change risks and related transparency.

As China’s industrial structure continues to upgrade and optimize, the consumption capacity of rural residents gradually improves and the role of consumption in economic growth is increasingly prominent. Against the background of weak external demand, the untapped potential of rural consumption has become a key force in expanding domestic demand. As one of the important means that the government has long relied on, fiscal support for agriculture has played a crucial role in activating the rural consumer market. This manuscript aims to explore the impact of local fiscal support for agricultural expenditure (FSAE) on rural consumption in China, as well as to examine the mediating role of the level of rural financial development.

In this manuscript, the authors use the provincial panel data of 31 provinces in China from 2000 to 2020. The data of all variables mainly come from China Statistical Yearbook and China Rural Statistical Yearbook. According to the variable selection above, 651 sample data of 31 provinces and cities across China from 2000 to 2020 are organized. In terms of methodology, multiple fixed-effects panel model is applied to regression.

Firstly, FSAE varies significantly, while rural consumption slowly but steadily rises, with a relatively stable consumption structure. Secondly, FSAE has a significant positive effect on rural consumption. Thirdly, mediation testing indicates that mechanisms such as income, uncertainty and financial development have significant positive mediating effects on rural consumption. Thirdly, there is evident regional heterogeneity in FSAE’s impact on rural consumption. The Western regions, under government fiscal support, show a more significant effect on the elevation of rural consumption levels, while the role of FSAE in optimizing the consumption structure of rural residents in eastern and central regions is more pronounced.

Firstly, a systematic examination of local FSAE and rural consumption has been conducted, enriching relevant theories. Secondly, utilizing econometric empirical methods to research the relationship between local FSAE and rural consumption provides an exploratory extension to empirical studies on rural consumption in China. This offers empirical evidence for local fiscal support in agricultural development and the promotion of rural consumption.

Because of the advantages of high deposition efficiency and low manufacturing cost compared with other additive technologies, robotic wire arc additive manufacturing (WAAM) technology has been widely applied for fabricating medium- to large-scale metallic components. The additive manufacturing (AM) method is a relatively complex process, which involves the workpiece modeling, conversion of the model file, slicing, path planning and so on. Then the structure is formed by the accumulated weld bead. However, the poor forming accuracy of WAAM usually leads to severe dimensional deviation between the as-built and the predesigned structures. This paper aims to propose a visual sensing technology and deep learning–assisted WAAM method for fabricating metallic structure, to simplify the complex WAAM process and improve the forming accuracy.

Instead of slicing of the workpiece modeling and generating all the welding torch paths in advance of the fabricating process, this method is carried out by adding the feature point regression branch into the Yolov5 algorithm, to detect the feature point from the images of the as-built structure. The coordinates of the feature points of each deposition layer can be calculated automatically. Then the welding torch trajectory for the next deposition layer is generated based on the position of feature point.

The mean average precision score of modified YOLOv5 detector is 99.5%. Two types of overhanging structures have been fabricated by the proposed method. The center contour error between the actual and theoretical is 0.56 and 0.27 mm in width direction, and 0.43 and 0.23 mm in height direction, respectively.

The fabrication of circular overhanging structures without using the complicate slicing strategy, turning table or other extra support verified the possibility of the robotic WAAM system with deep learning technology.

The combination of an Engineered Cementitious Composite (ECC) layer and steel plate to reinforce RC beams (ESRB) is a new strengthening method. The ESRB was proposed based on the steel plate at the bottom of RC beams, aiming to solve the problem of over-reinforced RC beams and improve the bearing capacity of RC beams without affecting their ductility.

In this paper, the finite element model of ESRB was established by ABAQUS. The results were compared with the experimental results of ESRB in previous studies and the reliability of the finite element model was verified. On this basis, parameters such as the width of the steel plate, thickness of the ECC layer, damage degree of the original beam and cross-sectional area of longitudinal tensile rebar were analyzed by the verified finite element model. Based on the load–deflection curve of ESRB, ESRB was discussed in terms of ultimate bearing capacity and ductility.

The results demonstrate that when the width of the steel plate increases, the ultimate load of ESRB increases to 133.22 kN by 11.58% as well as the ductility index increases to 2.39. With the increase of the damage degree of the original beam, the ultimate load of ESRB decreases by 23.7%–91.09 kN and the ductility index decreases to 1.90. With the enhancement of the cross-sectional area of longitudinal tensile rebar, the ultimate bearing capacity of ESRB increases to 126.75 kN by 6.2% and the ductility index elevates to 2.30. Finally, a calculation model for predicting the flexural capacity of ESRB is proposed. The calculated results of the model are in line with the experimental results.

Based on the comparative analysis of the test results and numerical simulation results of 11 test beams, this investigation verified the accuracy and reliability of the finite element simulation from the aspects of load–deflection curve, characteristic load and failure mode. Furthermore, based on load–deflection curve, the effects of steel plate width, ECC layer thickness, damage degree of the original beam and cross-sectional area of longitudinal tensile rebar on the ultimate bearing capacity and ductility of ESRB were discussed. Finally, a simplified method was put forward to further verify the effectiveness of ESRB through analytical calculation.

This paper improves the evaluation index system of green building operation effect and establishes the evaluation model of green building operation effect. It is expected to promote energy saving and emission reduction and provide a more scientific evaluation method for green building operation effect evaluation.

First, 20 key evaluation indexes are selected to establish the operation effective evaluation index system. Then, the combined weight method is proposed to determine the weight of each evaluation index. Next, the gray clustering-fuzzy comprehensive evaluation method is used to construct the green building operation effective evaluation model. Finally, the feasibility and validity of the selected model were verified by taking Shenzhen Bay One green building in Shenzhen as an example.

This paper establishes the evaluation system of green building operational effect, and evaluates green building from the angle of operational effect. Taking Shenzhen Bay One project as an example, the rationality and applicability of the model are verified.

In this paper, for the first time, relevant indexes of user experience are included in the evaluation system of green building operational effect, which makes the evaluation system more perfect. In addition, a more scientific fuzzy gray clustering method is used to evaluate the operational effect of green building, and a new evaluation model is established.

Trust plays a crucial role in overcoming uncertainty and reducing risks. Uncovering the trust mechanism in the sharing economy may enable sharing platforms to design more effective marketing strategies. However, existing studies have inconsistent conclusions on the trust mechanism in the sharing economy. Therefore, this study aims to investigate the antecedents and consequences of different dimensions of trust (trust in platform and trust in peers) in the sharing economy.

First, we conducted a meta-analysis of 57 related articles. We tested 13 antecedents of trust in platform (e.g. economic benefits, enjoyment, and information quality) and eight antecedents of trust in peers (e.g. offline service quality and providers’ reputation), as well as their consequences. Then, we conducted subgroup analyses to test the moderating effects of economic development level (Developed vs Developing), gender (Female-dominant vs Male-dominant), platform type (Accommodation vs Transportation), role type (Obtainers vs Providers), and uncertainty avoidance (Strong vs Weak).

The results confirm that all antecedents and consequences significantly affect trust in platform or peers to varying degrees. Moreover, trust in platform greatly enhances trust in peers. Besides, the results of the moderating effect analyses demonstrate the variability of antecedents and consequences of trust under different subgroups.

This paper provides a clear and holistic view of the trust mechanism in the sharing economy from an object-based trust perspective. The findings may offer insights into trust-building in the sharing economy.

The purpose of this paper is to investigate the performance of Passive Direct Methanol Fuel Cell (PDMFC) experimentally using various Membrane Electrode Assembly (MEA) shapes such as square, rectangle, rhombus, and circle with equal areas and equal perimeters. The variation in MEA shape/size is achieved by altering gasket openings in the dynamic regions.

In the equal areas of MEA shapes, gasket opening areas of 1963.5 (+/−0.2) mm2 are used. Whereas in the equal perimeters of shapes, gasket opening perimeters of 157.1 (+/−0.2) mm are used. In this experimentation, Nickel-201 current collectors with 45.3% of circular openings are used on both the anode and cathode sides. The experiment is carried out at a 5 molar methanol concentration to find out the highest power density of the cell.

In the equal areas, among the shapes that are chosen for investigation, the square shape opening consisting of a perimeter of 177.2 mm has developed a maximum power density of 6.344 mWcm⁻² and a maximum current density of 65.2 mAcm⁻². Similarly, in equal perimeters, the rhombus shape opening with an area of 1400 mm2 has developed a maximum power density of 7.714 mWcm⁻² and a maximum current density of 85.3 mAcm⁻².

The novelty of this research work is instead of fabricating various shapes and sizes of highly expensive MEAs, the desired shapes and sizes of the MEA are achieved by altering gasket openings over dynamic regions to find out the highest power density of the cell.