Search results

This paper proposes that if a political system is more like to facilitate a unified government, to establish a strong executive body and to respond to the needs of the majority, financial reforms are more likely to emerge from the policymaking process and produce positive results. On the contrary, political systems that discourage those governing features are less likely to produce reforms. This chapter compares financial reform processes in China, Taiwan and New Zealand. All of them performed low level of financial reforms in the early 1980s but resulted in different situations later. In the mid-2000s, New Zealand heralded the most efficient and stable financial system; while Taiwan lagged behind and China performed the worst. Evidence showed that China’s authoritarian system may be the most superior in forming a unified government with a strong executive, but the policy priority often responds more to the interests of a small group of power elites; therefore the result of financial reform can be limited. Taiwan’s presidential system can produce greater financial reform when the ruling party controls both executive and legislative bodies, but legislative obstructions may occur under a divided government. New Zealand's Westminster system produces the most effective and efficient financial reform due to its unified government and a strong executive branch with consistent and stable supports from the New Zealand Parliament.

The purpose of this paper is to present special nine‐node quadrilateral elements to discretize the un‐cracked boundary and the inclined surface crack in a transversely isotropic cuboid under a uniform vertical traction along its top and bottom surfaces by a three‐dimensional (3D) boundary element method (BEM) formulation. The mixed‐mode stress intensity factors (SIFs), K_I, K_II and K_III, are calculated.

A 3D dual‐BEM or single‐domain BEM is employed to solve the fracture problems in a linear anisotropic elastic cuboid. The transversely isotropic plane has an arbitrary orientation, and the crack surface is along an inclined plane. The mixed 3D SIFs are evaluated by using the asymptotical relation between the SIFs and the relative crack opening displacements.

Numerical results show clearly the influence of the material and crack orientations on the mixed‐mode SIFs. For comparison, the mode‐I SIF when a horizontal rectangular crack is embedded entirely within the cuboid is calculated also. It is observed that the SIF values along the crack front are larger when the crack is closer to the surface of the cuboid than those when the crack is far away from the surface.

The FORTRAN program developed is limited to regular surface cracks which can be discretized by the quadrilateral shape function; it is not very efficient and suitable for irregular crack shapes.

The evaluation of the 3D mixed‐mode SIFs in the transversely isotropic material may have direct practical applications. The SIFs have been used in engineering design to obtain the safety factor of the elastic structures.

This is the first time that the special nine‐node quadrilateral shape function has been applied to the boundary containing the crack mouth. The numerical method developed can be applied to the SIF calculation in a finite transversely isotropic cuboid within an inclined surface crack. The computational approach and the results of SIFs are of great value for the modeling and design of anisotropic elastic structures.

The purpose of this study is to explore how digital construction policy (DCP) drives enterprise green innovation (EGI) from an information processing theory (IPT) perspective, including the mediating mechanisms of market information accessibility and operational risk, the moderating role of intellectual property protection (IPP) and product market competition (PMC) and the heterogeneous effects of ownership, Internet development and managerial ability.

Based on the matched panel data of A-share listed enterprises from 2011 to 2019 and the Broadband China policy as a quasinatural experiment, this study investigates the impact of DCP on EGI by constructing a multi-time point difference-indifferences (DID) model.

Digital construction policies can significantly promote EGI. DCP works in two fundamental ways, namely by increasing market information accessibility and reducing operational risk. IPP and PMC significantly increased the contribution of digital construction policies to EGI. Heterogeneity analysis found that digital technology has a stronger promotion effect for SOEs, high-managerial-ability enterprises and enterprises in regions with low Internet development levels.

The study provides new insights about the antecedents of EGI from a DCP perspective. It also enlightens emerging economies to actualize green innovation under the digital wave.

From the perspective of IPT, this study explains the mechanism of DCP-driven EGI. It enhances understanding of the relationship between DCP and EGI.

More than 1.2 billion people live in what we Americans typically refer to as “Mainland China”. Without question, China is the world's largest surviving socialist state.

The purpose of this paper is to set out a study of a Mannich base, which was synthesized and used as an acidizing corrosion inhibitor first, and to the corrosion inhibitor mechanism.

A Mannich base, 1-phenyl-3-(1-pyrrolidinyl)-propanone (PHPP), was synthesized with acetophenone, pyrrolidine and formaldehyde at pH = approximately 2-3. The structure of PHPP was characterized by elemental analysis and Fourier transform infrared spectroscopy (FTIR). The corrosion inhibition of PHPP on N80 steel in 15 per cent hydrochloric acid (HCl) was studied by weight loss method, scanning electron microscope (SEM) and energy dispersive X-ray analysis (EDAX), and the adsorption behavior of PHPP on the surface of N80 steel was discussed.

The results showed that the inhibition efficiency reached to 99.8 per cent and corrosion rate was 2.65 g·m-2·h-1 at 0.6 per cent of PHPP concentration in 15 per cent HCl, which indicated that PHPP presented excellent corrosion inhibition performance. The results of SEM and EDAX analysis showed that PHPP could be absorbed on the surface of N80 steel. The adsorption process of PHPP on the surface of N80 steel was chemisorption. This process was spontaneous and obeyed Langmuir adsorption isotherm.

It was found that PHPP presented excellent corrosion inhibition performance, and it is practicable to enhance oil production in oilfield development as a oil-well acidizing inhibitor. The study results can provide theoretical guidelines for the development of the inhibitor.

As the normality concept for frictional dilatant material has a serious drawback, the key feature in this numerical study is that the material here is characterized by elastic-viscoplastic constitutive relation with plastic non-normality effect for two different hardness functions. The paper aims to discuss this issue.

Quasi-static, mode I plane strain crack tip fields have been investigated for a plastically compressible isotropic hardening–softening–hardening material under small-scale yielding conditions. Finite deformation, finite element calculations are carried out in front of the crack with a blunt notch. For comparison purpose a few results of a hardening material are also provided.

The present numerical calculations show that crack tip deformation and the field quantities near the tip significantly depend on the combination of plastic compressibility and slope of the hardness function. Furthermore, the consideration of plastic non-normality flow rule makes the crack tip deformation as well as the field quantities significantly different as compared to those results when the constitutive equation exhibits plastic normality.

To the best of the authors’ knowledge, analyses, related to the constitutive relation exhibiting plastic non-normality in the context of plastic compressibility and softening (or softening hardening) on the near tip fields, are not explored in the literature.

Presents an overview of currently recognized theories of imprecise probabilities and their possible extensions. It is shown how the theories are ordered by their levels of generality. A summary of current results regarding measures of uncertainty and uncertainty‐based information is also presented.

This chapter conceptually addresses outward internationalisation of small and medium sized enterprises (SMEs) from the emerging markets (EMs) by focussing on the role of prior contract manufacturing relationships with a developed market multinational enterprise (DMNE). The internationalisation of SMEs originating from EMs is a rather under-researched area and the role of prior contract manufacturing experience specifically has not been addressed in prior studies. Based on a literature review, the authors identified four capabilities developed by EM SMEs during their contract manufacturing relationships with DMNE(s) that potentially help in later outward internationalisation. The authors incorporate some insights from dynamic capabilities theory, and develop propositions addressing the role of relational capital, human capital, manufacturing productivity capabilities and product innovation capabilities in this specific context. Despite being conceptual in nature, this chapter is one of the first to explicitly highlight the role of these specific capabilities developed during contract manufacturing relationship for outward internationalisation, setting bases for future studies to further empirically investigate them in different contexts.

The purpose of this study was to fabricate silicone products that had different hardnesses and moduli, thus partially addressing the limitations of homogeneous materials whose deformation depends on altered structure or dimensions, and to provide new dimensions for the design of silicone soft structures.

A soft material three-dimensional printing platform with a dual-channel printing capability was designed and built. Using the material extrusion method, material screening was first performed using single-channel printing, followed by dual-channel-regulated printing experiments on products having different hardness and modulus values.

The proportion of additives has an effect on the accuracy of the printed product. Material screening revealed that Sylgard 527 and SE 1700 could be printed without additives. The hardness and mechanical properties of products are related to the percentage in their composition of hard and soft materials. The hardness of the products could be adjusted from 26A to 42A and the Young’s modulus from 0.875 to 2.378 Mpa.

Existing silicone products molded by casting or printing are mostly composed of a single material, whose uniform hardness and modulus cannot meet the demand for differentiated deformation in the structure. The existing multihardness silicone material printing method has the problems of long material mixing time and slow hardness switching and complicated multi-extrusion head switching. In this study, a simple, low-cost and responsive material extrusion-based hardness programmable preparation method for silicone materials is proposed.

Leaders have been facing serious challenges in managing organizations during COVID-19, which has brought the need for implementing sudden technological change across the globe. Hence, it was important to identify effective leadership styles to successfully manage the transformational process during the period. Therefore, the current study aims to explore and compare the effectiveness of transformational and ethical leadership (EL) in terms of achieving organizational goals during COVID-19 in public and private sector organizations in Pakistan.

Comparative research was carried out to find out the effectiveness of transformational and EL during and pre-COVID-19 in public and private sector organizations using the lens of social exchange theory. Data was collected from 214 respondents representing 67.6% of public and 32.4% of private sector organizations of Pakistan at two different points in time. Detailed comparative analyses were conducted in AMOS version 24 to assess the effectiveness of leadership styles before and during COVID-19 times.

On the whole, transformational leadership (TL) was found to have a greater impact on organizational effectiveness (OE) in comparison with EL in both pre-and during COVID-19 situations. Moreover, the effectiveness of TL significantly increased and the same decreased for EL during COVID-19. Additional analyses indicated that TL was effective for the private sector and EL for public sector organizations during COVID-19.

The study has not considered the mediating mechanisms of employee motivation, engagement and performance in the relationship between transformational and EL styles and OE, which can be explored in the future.

These results have important implications for private and public sector organizations and suggest that the adoption of a TL style will generate better results in the private sector and an EL style in public sector organizations to achieve OE in uncertain situations such as COVID-19.

The study shows that leadership with more care and concern for humanity tends to perform better in terms of generating results for OE. Therefore, both transformational and EL are based on individualized consideration for employees and are effective during COVID-19 in private and public sector organizations in Pakistan.

The study has carried out the comparative analyses in three different ways, including leadership styles (transformational and ethical), type of organization (private and public) and time frames (pre and during COVID-19), which is a true contribution of the research in the Pakistani context.