Search results

A cross-domain intelligent software-defined network (SDN) routing method based on a proposed multiagent deep reinforcement learning (MDRL) method is developed.

First, the network is divided into multiple subdomains managed by multiple local controllers, and the state information of each subdomain is flexibly obtained by the designed SDN multithreaded network measurement mechanism. Then, a cooperative communication module is designed to realize message transmission and message synchronization between the root and local controllers, and socket technology is used to ensure the reliability and stability of message transmission between multiple controllers to acquire global network state information in real time. Finally, after the optimal intradomain and interdomain routing paths are adaptively generated by the agents in the root and local controllers, a network traffic state prediction mechanism is designed to improve awareness of the cross-domain intelligent routing method and enable the generation of the optimal routing paths in the global network in real time.

Experimental results show that the proposed cross-domain intelligent routing method can significantly improve the network throughput and reduce the network delay and packet loss rate compared to those of the Dijkstra and open shortest path first (OSPF) routing methods.

Message transmission and message synchronization for multicontroller interdomain routing in SDN have long adaptation times and slow convergence speeds, coupled with the shortcomings of traditional interdomain routing methods, such as cumbersome configuration and inflexible acquisition of network state information. These drawbacks make it difficult to obtain global state information about the network, and the optimal routing decision cannot be made in real time, affecting network performance. This paper proposes a cross-domain intelligent SDN routing method based on a proposed MDRL method. First, the network is divided into multiple subdomains managed by multiple local controllers, and the state information of each subdomain is flexibly obtained by the designed SDN multithreaded network measurement mechanism. Then, a cooperative communication module is designed to realize message transmission and message synchronization between root and local controllers, and socket technology is used to ensure the reliability and stability of message transmission between multiple controllers to realize the real-time acquisition of global network state information. Finally, after the optimal intradomain and interdomain routing paths are adaptively generated by the agents in the root and local controllers, a prediction mechanism for the network traffic state is designed to improve awareness of the cross-domain intelligent routing method and enable the generation of the optimal routing paths in the global network in real time. Experimental results show that the proposed cross-domain intelligent routing method can significantly improve the network throughput and reduce the network delay and packet loss rate compared to those of the Dijkstra and OSPF routing methods.

The purpose of this paper is to develop a novel multivariate fractional grey model termed GM(a, n) based on the classical GM(1, n) model. The new model can provide accurate prediction with more freedom, and enrich the content of grey theory.

The GM(α, n) model is systematically studied by using the grey modelling technique and the forward difference method. The optimal fractional order a is computed by the genetic algorithm. Meanwhile, a stochastic testing scheme is presented to verify the accuracy of the new GM(a, n) model.

The recursive expressions of the time response function and the restored values of the presented model are deduced. The GM(1, n), GM(a, 1) and GM(1, 1) models are special cases of the model. Computational results illustrate that the GM(a, n) model provides accurate prediction.

The GM(a, n) model is used to predict China’s total energy consumption with the raw data from 2006 to 2016. The superiority of the GM(a, n) model is more freedom and better modelling by fractional derivative, which implies its high potential to be used in energy field.

It is the first time to investigate the multivariate fractional grey GM(α, n) model, apply it to study the effects of China’s economic growth and urbanization on energy consumption.

Sand production is a challenging issue during hydrocarbon production in the oil and gas industry. This paper aims to investigate one sand production process, i.e. transient sand production, using a novel bonded particle lattice Boltzmann method. This mesoscopic technique provides a unique insight into complicated sand erosion process during oil exploitation.

The mesoscopic fluid-particle coupling is directly approached by the immersed moving boundary method in the framework of lattice Boltzmann method. Bonded particle method is used for resolving the deformation of solid. The onset of grain erosion of rocks, which are modelled by a bonded particle model, is realised by breaking the bonds simulating cementation when the tension or tangential force exceeds critical values.

It is proved that the complex fluid–solid interaction occurring at the pore/grain level can be well captured by the immersed moving boundary scheme in the framework of the lattice Boltzmann method. It is found that when the drawdown happens at the wellbore cavity, the tensile failure area appears at the edge of the cavity. Then, the tensile failure area gradually propagates inward, and the solid particles at the tensile failure area become fluidised because of large drag forces. Subsequently, some eroded particles are washed out. This numerical investigation is demonstrated through comparison with the experimental results. In addition, through breaking the cementation, which is simulated by bond models, between bonded particles, the transient particle erosion process is successfully captured.

A novel bonded particle lattice Boltzmann method is used to investigate the sand production problem at the grain level. It is proved that the complex fluid–solid interaction occurring at the pore/grain level can be well captured by the immersed moving boundary scheme in the framework of the lattice Boltzmann method. Through breaking the cementation, which is simulated by bond models, between bonded particles, the transient particle erosion process is successfully captured.

The use of removable complete dentures is a selectable restorative procedure for edentulous patients. To improve the fabrication quality and efficiency of removable complete dentures, this paper aims to introduce a new method to fabricate customized wax complete dentures with additive manufacturing. This process uses complementary digital technologies, and allows faster and better manufacture of complete dentures.

In the study, a dental scanner was used to obtain surface data from edentulous casts and rims made by the dentist. A parameterized three-dimensional graphic database of artificial teeth was pre-established. Specialized computer-aided design software was used to set up the artificial dentition and design the esthetic gingiva and base plate. A selective laser sintering machine was used to transfer the data from stereolithography files into a wax base plate with location holes for each artificial tooth.

Under this method, a set of wax base plates with 28 location holes available for the placement of the artificial teeth were designed and fabricated within 6 h. The try-in wax dentures fitted the patient’s mouth well, besides occlusion relationships. Then, the occlusion relationships can be adjusted manually to achieve a balanced centric occlusion.

This method can be used to design and fabricate wax try-in removable complete dentures semi-automatically and rapidly; however, the algorithm for the occlusion contact design needs to be improved.

The business world today is witnessing ever-growing disruption. This study highlights corporate social responsibility (CSR) as an effective strategy for firms in disrupted industries to consider in order to differentiate themselves and to increase their chance of survival facing disruption.

In this study, the authors test the hypotheses using a multilevel modeling (MLM) design to capture the group and intergroup effects at the industry level and at the firm level. The empirical analysis is based on a panel sample of 1,193 firms over the 10-year period from 2010 to 2019.

The empirical analysis indicates that CSR has a positive impact on corporate financial stability and the effect is especially significant for firms in disrupted industries. Further investigation suggests that this positive effect largely runs through traits of the social pillar, such as human rights, employee relations, customer protection, product responsibility and community impact. The results are robust after controlling for other firm-specific characteristics and after addressing endogeneity concerns.

This study examines whether, and through which channel, CSR helps enhance corporate financial stability and mitigate bankruptcy risk in disrupted industries. To the best of the authors' knowledge, this study is the first attempt to explore the use of CSR as an effective strategic response to disruption. Further analysis indicates that the social capital built through CSR plays an important role in helping enhance corporate financial stability.

The purpose of this paper is to study a fractional grey model FAGM(1,1,t^α) based on the GM(1,1,t^α) model and the fractional accumulated generating operation, and then predict the national health expenditure, the government health expenditure and the out-of-pocket health expenditure of China.

The presented univariate grey model is systematically studied by using the grey modelling technique, the fractional accumulated generating operation and the trapezoid approximation formula of definite integral. The optimal system parameters r and α are evaluated by the particle swarm optimisation algorithm.

The expressions of the time response function and the restored values of this model are derived. The GM(1,1), NGM(1,1,k,c) and GM(1,1,t^α) models are particular cases of the FAGM(1,1,t^α) model with deterministic r and α. Compared with other forecasting models, the results of the FAGM(1,1,t^α) model have higher precision.

The superiority of the new model has high potential to be used in the medicine and health fields and others. Results can provide a guideline for government decision making.

The univariate fractional grey model FAGM (1,1,t^α) successfully studies the China’s health expenditure.

The purpose of this paper is to investigate the interfacial conductivity and corrosion resistance of the Ni–P/Ti₄O₇ composite coating that is deposited on a carbon steel substrate as bipolar plates for proton exchange membrane fuel cells.

The Ni–P/Ti₄O₇ coating was prepared by electroless plating. Scanning electron microscopy, white light interference, energy dispersive spectrometry and X-ray diffraction were used, respectively, to study the surface morphology, chemical composition and phase composition of coated samples. Electrochemical impedance spectroscopy, potentiodynamic and potentiostatic polarization were used to test the electrochemical performance and corrosion behavior. The interfacial contact resistance (ICR) was measured via the standard method.

The surface of the Ni–P/Ti₄O₇ coating is complete and dense and without obvious defects. The electrochemical test results show that the Ni–P/Ti₄O₇ coating provides better corrosion resistance than the Ni–P coating and substrate. Compared with the Ni–P coating, the ICR of the Ni–P/Ti₄O₇ coating is lower by about 82.7%. This is because the coating has more conductive contact points. The more exciting thing is that the ICR of the Ni–P/Ti₄O₇ coating only increases to 12.38 mΩ·cm² after 5 h of polarization.

This paper provides a method for achieving surface modification of metal bipolar plates. Introducing Ti₄O₇ particles in the Ni–P layer reduces the contact resistance before and after polarization while ensuring good corrosion resistance.

Although recent literature has examined diverse measures adopted by SMEs to navigate the COVID-19 turbulence, there is a shortage of evidence on how crisis-time strategy creation behaviour and digitalization activities increase (1) sales and (2) cash flow. Thus, predicated on a novel strategy creation perspective, this inquiry aims to investigate the crisis behaviour, sales and cash flow performance of 528 SMEs in Morocco.

Novel links between (1) aggregate wage cuts, (2) variable operating hours, (3) deferred payment to suppliers, (4) deferred payment to tax authorities and (5) sales performance are developed and tested. A further link between sales performance and cash flow is also examined and the analysis is conducted using a non-linear structural equation modelling technique.

While there is a significant association between strategy creation behaviours and sales performance, only variable operating hours have a positive effect. Also, sales performance increases cash flow and this relationship is substantially strengthened by e-commerce digitalization and innovation.

Theoretically, to the best of the authors’ knowledge, this is one of the first inquiries to espouse the strategy creation view to explain SMEs' crisis-time behaviour and digitalization. For practical purposes, to supplement Moroccan SMEs' propensity to seek tax deferrals, it is argued that debt and equity support measures are also needed to boost sales performance and cash flow.