Search results

Might the impact of the financial stress on exchange markets be asymmetric and exposed to regime changes? Departing from the existing literature, highlighting that the domestic and foreign financial stress in terms of money market have substantial effects on exchange market, this paper aims to investigate the impacts of the bond yield spreads of three emerging countries (Mexico, Russia, and South Korea) on their exchange market pressure indices using monthly observations for the period 2010:01–2019:12. Additionally, the paper analyses the impact of bond yield spread of the US on the exchange market pressure indices of the three mentioned emerging countries. The authors hypothesized whether the negative and positive changes in the bond yield spreads have varying effects on exchange market pressure indices.

To address the research question, we measure the bond yield spread of the selected countries by using the interest rate spread between 10-year and 3-month treasury bills. At the same time, the exchange market pressure index is proxied by the index introduced by Desai et al. (2017). We base the empirical analysis on nonlinear vector autoregression (VAR) models and an asymmetric quantile-based approach.

The results of the impulse response functions indicate that increases/decreases in the bond yield spreads of Mexico, Russia and South Korea raise/lower their exchange market pressure, and the effects of shocks in the bond yield spreads of the US also lead to depreciation/appreciation pressures in the local currencies of the emerging countries. The quantile connectedness analysis, which allows for the role of regimes, reveals that the weights of the domestic and foreign bond yield spread in explaining variations of exchange market pressure indices are higher when exchange market pressure indices are not in a normal regime, indicating the role of extreme development conditions in the exchange market. The quantile regression model underlines that an increase in the domestic bond yield spread leads to a rise in its exchange market pressure index during all exchange market pressure periods in Mexico, and the relevant effects are valid during periods of high exchange market pressure in Russia. Our results also show that Russia differs from Mexico and South Korea in terms of the factors influencing the demand for domestic currency, and we have demonstrated the role of domestic macroeconomic and financial conditions in surpassing the effects of US financial stress. More specifically, the impacts of the domestic and foreign financial stress vary across regimes and are asymmetric.

This study enriches the literature on factors affecting the exchange market pressure of emerging countries. The results have significant economic implications for policymakers, indicating that the exchange market pressure index may trigger a financial crisis and economic recession.

The purpose of this paper is to fill the momentous gap by explicitly investigating the asymmetric effects of monetary policy (MP) on non-bank financial intermediation (NBFI) assets.

The authors utilized panel data from 29 countries for the period of 2012–2020 and used the quantile regression estimation. In addition to simultaneous quantile regression (SQR), the authors also employ quantile regression with clustered data (Parente and Silva, 2016) and the generalized quantile regression (GQR) method (Powell, 2020).

The empirical results show a significant heterogeneous impact of MP. While there is a positive relationship between MP and NBFI assets (“waterbed effect”) at lower quantiles of NBFI assets, at middle and higher quantiles, MP has a negative impact on NBFI assets (“search for yield” effect). The authors further find that negative impact strengthens as the quantile levels of NBFI assets rise from mid to high. Findings also reveal that “procyclicality” (except higher quantile) and “institutional demand” hypotheses hold. However, regarding “regulatory arbitrage,” mixed results are observed indicating the impact of Basel III requirements.

Previous empirical studies have concentrated on either the Dynamic Stochastic General Equilibrium (DSGE) framework or conditional mean regression approaches and delivered mixed findings of the MP effects on NBFI. The current paper takes a step toward dealing with this issue by deploying quantile regression methodology, which shows the impact of MP on NBFI at different conditional distributions (quantiles) of NBFI assets instead of just NBFI's conditional mean distribution.

Professional sports teams employ highly paid managers and coaches to train players and make tactical and strategic team decisions. A large literature analyzes the impact of manager decisions on team outcomes. Empirical analysis of manager decisions requires a quantifiable proxy variable for manager decisions. Previous research focused on manager dismissals, tenure on teams, the number of substitutions made in games or the number of healthy players on rosters held out of games for rest, generally finding small positive impacts of manager decisions on team success.

The authors quantify manager decisions by developing a novel measure of game-specific coaching decisions: the Herfindahl–Hirschman Index (HHI) of playing-time across players on a team roster over the course of a season.

Evidence from two-way fixed effects regression models explaining observed variation in National Basketball Association team winning percentage over the 1999–2000 to 2018–2019 seasons show a significant association between managers’ allocation of playing time and team success. A one standard deviation change in playing-time HHI that reflects a flattened distribution of player talent is associated with between one and two additional wins per season, holding the talent of players on the team roster constant. Heterogeneity exists in the impact across teams with different player talent.

This is one of the first papers to examine playing-time concentration in the NBA. The results are important for understanding how managerial decisions about resource allocation lead to sustained competitive advantage. Linking coaching decisions to wins can help teams to better promote this core product.

This study investigates the optimum size for manufacturing firms and the impact of subcontracting on firms' likelihood of achieving their optimal scale in Vietnam.

Using data from the enterprise census in 2017 and 2021, the paper first estimates the production function to identify the optimum firm size for manufacturing firms and then, applies the logit model to investigate factors associated with the optimal firm size.

The study reveals that medium-sized firms exhibit the highest level of productivity. Nevertheless, a consistent trend emerges, indicating that nearly 90% of manufacturing firms in Vietnam operated below their optimal scale in both 2017 and 2021. An analysis of the impact of subcontracting on firms' likelihood to achieve their optimal scale emphasizes its crucial role, especially for foreign firms, exerting an influence nearly five times greater than that of the judiciary system.

The paper's findings offer crucial policy implications, suggesting that initiatives aimed at enhancing the overall productivity of the manufacturing sector should prioritise facilitating contract arrangements to encourage firms to reach their optimal size. These insights are also valuable for other countries with comparable firm size distributions.

This paper provides the first empirical evidence on the relationship between firm size and productivity as well as the role of subcontracting in firms' ability to reach their optimal scale in a country with a right-skewed distribution of firm sizes.

This chapter aims to estimate the impact of the use of an innovative cultivation method on the social, economic and environmental aspects in the French region Aix-en-Provence, by using the survey data for 200 heterogeneous vegetable producers (organic and conventional). It distinguishes three types of producers in the French region Aix-en-Provence. First, conventional producers (n = 100) who used a high level of mechanization, better access to water, high yield, high labor costs. Second, certified organic producers (n = 70) who used organic technologies such as biotechnology and rotation, low yield, high organic product price compared to conventional products, a family workforce and high transport. Third, noncertified organic producers (n = 30) have used the same technologies as certified organic producers, while they sell their products at the same price as conventional products. Labor is the member of the family. These noncertified farms are marked by high operating and transport costs and low yield compared to conventional producers or certified organic producers. The results show that this cultivation method has a positive effect on the environmental aspect, however a negative one on the social and economic aspect.

The purpose of this paper is to investigate the process of fused filament fabrication (FFF) of a compliant gripper (CG) using thermoplastic polyurethane (TPU) material. The paper studies the applicability of different CG designs and the efficiency of some design parameters.

After reviewing a number of different papers, two designs were selected for a number of exploratory experiments. Using design of experiments (DOE) techniques to identify important design parameters. Finally, the efficiency of the parts was investigated.

The research finds that a simpler design sacrifices some effectiveness in exchange for a remarkable decrease in production cost. Decreasing infill percentage of previous designs and 3D printing them, out of TPU, experimenting with different parameters yields functional products. Moreover, the paper identified some key parameters for further optimization attempts of such prototypes.

The cost of conducting FFF experiments for TPU increases dramatically with product size, number of parameters studied and the number of experiments. Therefore, all three of these factors had to be kept at a minimum. Further confirmatory experiments encouraged.

This paper addresses an identified need to investigate applications of FFF and TPU in manufacturing functional efficient flexible mechanisms, grippers specifically. While most research focused on designing for increased performance, some research lacks discussion on design philosophy, as well as manufacturing issues. As the needs for flexible grippers vary from high-performance grippers to lower performance grippers created for specific functions/conditions, some effectiveness can be sacrificed to reduce cost, reduce complexity and improve applicability in different robotic assemblies and environments.

The purpose of this paper is to gain a better understanding on how metasurfaces behave, in terms of currents in each unit cell. A better knowledge of their behavior could lead to an ad-hoc design for specific applications.

The methodology used is both theoretical and numerical; it is based on circuit theory and on an optimization procedure.

The results show that when the knowledge of the current in each unit cell of a metasurface is needed, the most common approximations currently used are often not accurate. Furthermore, a procedure for the termination of a metasurface, with application-driven goals, is given.

This paper investigates the distribution of the currents in a 2D metamaterial realized with magnetically coupled resonant coils. Different models for the analysis of these structures are illustrated, and the effects of the approximations they introduce on the current values are shown and discussed. Furthermore, proper terminations of the resonators on the boundaries have been investigated by implementing a numerical optimization procedure with the purpose of achieving a uniform distribution of the resonator currents. The results show that the behavior of a metasurface (in terms of currents in each single resonator) depends on different properties; as a consequence, their design is not a trivial task and is dependent on the specific applications they are designed for. A design strategy, with lumped impedance termination, is here proposed.

This study assesses the relevance of foreign aid to the incidence of capital flight and unemployment in 20 countries in sub-Saharan Africa.

The study is for the period 1996–2018, and the empirical evidence is based on interactive quantile regressions in order to assess the nexuses throughout the conditional distribution of the unemployment outcome variable.

From the findings, capital flight has a positive unconditional incidence on unemployment, while foreign aid dampens the underlying positive unconditional nexus. Moreover, in order for the positive incidence of capital flight to be completely dampened, foreign aid thresholds of 2.230 and 3.964 (% of GDP) are needed at the 10th and 25th quantiles, respectively, of the conditional distribution of unemployment. It follows that the relevance of foreign aid in crowding out the unfavourable incidence of capital flight on unemployment is significantly apparent only in the lowest quantiles or countries with below-median levels of unemployment. The policy implications are discussed.

The study complements the extant literature by assessing the importance of development assistance in how capital flight affects unemployment in sub-Saharan Africa.

The purpose of this paper is to investigate the vehicle-based sensor effect and pavement temperature on road condition assessment, as well as to compute a threshold value for the classification of pavement conditions.

Four sensors were placed on the vehicle’s control arms and one inside the vehicle to collect vibration acceleration data for analysis. The Analysis of Variance (ANOVA) tests were performed to diagnose the effect of the vehicle-based sensors’ placement in the field. To classify road conditions and identify pavement distress (point of interest), the probability distribution was applied based on the magnitude values of vibration data.

Results from ANOVA indicate that pavement sensing patterns from the sensors placed on the front control arms were statistically significant, and there is no difference between the sensors placed on the same side of the vehicle (e.g., left or right side). A reference threshold (i.e., 1.7 g) was computed from the distribution fitting method to classify road conditions and identify the road distress based on the magnitude values that combine all acceleration along three axes. In addition, the pavement temperature was found to be highly correlated with the sensing patterns, which is noteworthy for future projects.

The paper investigates the effect of pavement sensors’ placement in assessing road conditions, emphasizing the implications for future road condition assessment projects. A threshold value for classifying road conditions was proposed and applied in class assignments (I-17 highway projects).

This study aims to investigate the fabrication of solid ankle foot orthoses (SAFOs) using fused deposition modeling (FDM) printing technology. It emphasizes cost-effective 3D scanning with the Kinect sensor and conducts a comparative analysis of SAFO durability with varying thicknesses and materials, including polylactic acid (PLA) and carbon fiber-reinforced (PLA-C), to address research gaps from prior studies.

In this study, the methodology comprises key components: data capture using a cost-effective Microsoft Kinect® Xbox 360 scanner to obtain precise leg dimensions for SAFOs. SAFOs are designed using CAD tools with varying thicknesses (3, 4, and 5 mm) while maintaining consistent geometry, allowing controlled thickness impact investigation. Fabrication uses PLA and PLA-C materials via FDM 3D printing, providing insights into material suitability. Mechanical analysis uses dual finite element analysis to assess force–displacement curves and fracture behavior, which were validated through experimental testing.

The results indicate that the precision of the scanned leg dimensions, compared to actual anthropometric data, exhibits a deviation of less than 5%, confirming the accuracy of the cost-effective scanning approach. Additionally, the research identifies optimal thicknesses for SAFOs, recommending a 4 and 5 mm thickness for PLA-C-based SAFOs and an only 5 mm thickness for PLA-based SAFOs. This optimization enhances the overall performance and effectiveness of these orthotic solutions.

This study’s innovation lies in its holistic approach, combining low-cost 3D scanning, 3D printing and computational simulations to optimize SAFO materials and thickness. These findings advance the creation of cost-effective and efficient orthotic solutions.