Search results

Presents a method of Max‐Fit biarc curve fitting technique to improve the accuracy of STL files and to reduce the file size for rapid prototyping. STL file has been widely accepted as a de facto standard file format for the rapid prototyping industry. However, STL format is an approximated representation of a true solid/surface model, and a huge amount of STL data is needed to provide sufficient accuracy for rapid prototyping. Presents a Max‐Fit biarc curve fitting technique to reconstruct STL slicing data for rapid prototyping. The Max‐Fit algorithm progresses through the STL slicing intersection points to find the most efficient biarc curve fitting, while improving the accuracy. Our results show that the proposed biarc curve‐fitting technique can significantly improve the accuracy of poorly generated STL files by smoothing the intersection points for rapid prototyping. Therefore, less strict requirements (i.e. loose triangle tolerances) can be used while generating the STL files.

The purpose of this paper is to propose a hybrid driving system that couples a motor and flywheel energy storage (FES) for a megawatt-scale superconducting direct current (DC) induction heater. Previous studies have proven that a superconducting DC induction heater has great advantages in relation to its energy efficiency and heating quality. In this heater, a motor rotates an aluminium billet in a DC magnetic field and the induced eddy current causes it to be heated. When the aluminium billet begins to rotate, a high peak load torque appears at a low rotation speed. Therefore, driving the billet economically has been a great challenge when designing the driving system, which is the focus of this paper.

A hybrid driving system based on FES is designed to provide extra torque when the peak load torque occurs at a low rotation speed, which allows the successful start-up of the aluminium billet and the operation of the motor at its rated capacity. The mechanical structure of this hybrid driving system is introduced. A simulation model was constructed using Matlab/Simulink and the dynamic start-up process is analysed. The influence of the flywheel’s inertia and required minimum engagement speed are investigated.

The results of this paper show that the hybrid driving system that couples FES and a motor can successfully be used to start the aluminium billet rotating. The flywheel’s inertia and engagement speed are the most important parameters. The inertia of the flywheel decreases with an increase in its engagement speed.

The cost of the driving system is significantly reduced, which is very important in relation to the commercial potential of this apparatus.

A novel start-up strategy for driving the aluminium billet of a superconducting DC induction heater at low speed is proposed based on FES.

In adaptive slicing, the number of layers is drastically reduced by using sloping layer walls. For both vertical (2.5D slices) and sloping (ruled slices) outer walls, the strategies for determining slice height generally consider a number of vertical sections along the contour of a slice. Surface deviation error is calculated at these sections and slice height subsequently determined. Instead, a method is proposed which calculates error at every part of the surface. This method approximates the outer wall between two successive contours by a series of taut cubic spline patches. It is proposed that the deviation between such a patch and the actual surface is a better and more exhaustive estimate of surface error. Results show that the predicted number of slices is slightly higher than that predicted by existing methods for sloping layer walls.

Since carbon nanotubes (CNTs) were discovered by Iijima in 1991, they have gained more and more attention by people because of their unique physical and chemical properties. The CNTs have one-dimensional nanostructure, high surface adsorption capacity, good conductivity and electronic ballistic transmission characteristics and therefore have excellent mechanical, electrical, physical and chemical properties. CNTs are ideal basic materials to make nanometer gas sensors. Nanometallic materials function as to enhance electrode activity and promote the electron transfer, so if composite nanometallic materials M (such as Au, Pt, Cu and Pd) and CNTs are used, all kinds of their characters of components would have coeffect. Electrochemical sensors by use of such composite as electrode would have a higher detection sensitivity.

CNTs were synthesized via chemical vapor deposition technique and were purified afterward. CNTs-M(Pt,Au) suspension was prepared by chemical deposition using spinning disc processor (SDP) and was coated on gold electrode. The modified electrodes were constructed, based on immobilization of glucose oxidase on an Au electrode by electrostatic effect. CNTs-Pt/ glassy carbon electrodes (GCE) electrodes were made by electrochemically deposition of platinum particles on GCE modified by CNTs. The microstructures of the harvested CNTs, CNTs-M (M = Au, Pt) were analyzed under scanning electron microscopy and transmission electron microscopy. The application of the sensor in medical detection has been evaluated.

The results shown that CNTs-Au biosensors exhibit good reproducibility, stability and fast response to glucose detection, it can be used in the clinic detection of glucose concentration in human serum. Using CNTs-Pt/GCE for formaldehyde detection exhibited high sensitivity and good reproducibility.

This study modified CNTs by using self-assembled techniques through SDP with nano Pt and Au by electrodeposition for the first time. CNTs-Pt/GCE electrode was prepared by depositing platinum particles electrochemically on GCE modified by CNTs. CNTs-Au-modified electrode was prepared by immobilization of glucose oxidase on an Au electrode first by electrostatic effect. Electrochemical behaviors of glucose at CNTs-Au and formaldehyde at CNTs-Pt/GCE were investigated by cyclic voltammetry.

The purpose of this paper is to enhance the compatibility of titanium dioxide in epoxy resins and thus the corrosion resistance of the coatings.

In this work, TiO₂ was modified by the mechanochemistry method where mechanical energy was combined with thermal energy to complete the modification. The stability of modified TiO₂ in epoxy was analyzed by sedimentation experiment. The modified TiO₂-epoxy coating was prepared, and the corrosion resistance of the coating was analyzed by open circuit potential, electrochemical impedance spectroscopy and neutral salt spray test.

High-temperature mechanical modification can improve the compatibility of TiO₂ in epoxy resin. At the same time, the modified TiO₂-epoxy coating showed better corrosion resistance. Compared to the unmodified TiO₂-epoxy coating, the coating improved the dry adhesion force by 61.7% and the adhesion drop by 33.3%. After 2,300 h of immersion in 3.5 Wt.% NaCl solution, the coating resistance of the modified TiO₂ coating was enhanced by nearly two orders of magnitude compared to the unmodified coating.

The authors have grafted epoxy molecules onto TiO₂ surfaces using a high-temperature mechanical force modification method. The compatibility of TiO₂ with epoxy resin is enhanced, resulting in improved adhesion of the coating to the substrate and corrosion resistance of the coating.

The purpose of this paper is to answer “Why do Chinese consumers use IOT systems?” and “Do consumers’ cognitive and affect experiences moderate the relationship between psychological perception factors and perceived usefulness?”

In-depth interview with consumers and experts had been conducted and then the perceived psychological factors that influence perceived usefulness had been summarized. Based on a survey test of 337 smart home users, this study applies partial least squares technique analysis to test the research model.

The research results show that perceived psychological factors (perceived ease of use, perceived intelligence, perceived convenience and perceived privacy risk) have significant effect on the intention and behavior of IOT systems usage through perceived usefulness. Cognitive experience moderates the relationship between perceived ease of use and perceived usefulness, perceived privacy risk and perceived usefulness; affect experience moderates the relationship between perceived ease of use and perceived usefulness.

The current study mainly tested the antecedents of consumers’ usage of IOT systems, and the outcome of using the system was not investigated. Future research can examine the outcome (e.g. satisfaction, perceived value) by using the expectation-confirmation theory.

This study provides a useful insight into the key driving factors in consumers’ intention and behavior of using IOT systems. The previous studies over IOT systems have not observed consumers’ perception of IOT systems, but in fact IOT systems are being applied to more and more personal users.

The COVID-19 pandemic has created a crisis for healthcare systems worldwide. There have been significant challenges to managing public and private health care and related services systems’ capacity to cope with testing, treatment and containment of the virus. Drawing on the foundational research by Frow et al. (2019), the paper explores how adopting a service ecosystem perspective provides insight into the complexity of healthcare systems during times of extreme stress and uncertainty.

A healthcare framework based on a review of the service ecosystem literature is developed, and the COVID-19 crisis in Australia provides an illustrative case.

The study demonstrates how the service ecosystem perspective provides new insight into the dynamics and multilayered nature of a healthcare system during a pandemic. Three propositions are developed that offer directions for future research and managerial applications.

The research provides an understanding of the relevance of managerial flexibility, innovation, learning and knowledge sharing, which offers opportunities leading to greater resilience in the healthcare system. In particular, the research addresses how service providers in the service ecosystem learn from this pandemic to inform future practices.

The service ecosystem perspective for health care offers fresh thinking and an understanding of how a shared worldview, institutional practices and supportive and disruptive factors influence the systems’ overall well-being during a crisis such as COVID-19.

RFID tags for sensing are available to operate and transmit sensing data to measurement equipment without battery and wires, which is a great advantage in establishing IoT environment. For crack sensing tags, however, the short service life of tags restricted their application. This paper aims to introduce a method of surface crack detection and monitoring based on RFID tag, which makes it possible for tags to be reused.

Metal plate to be monitored, acting as the ground plane of microstrip patch antenna, is underneath the crack sensing tag. The propagating surface crack in metal plate will change the electric length of tag’s antenna that is directly proportional to the crack depth and length. Thus, the deformation of sensing tag introduced by the load on metal structure is no longer a prerequisite for crack sensing.

The simulated and experimental results show that the proposed crack sensing tag can sense the change of surface crack with mm-resolution and sense surface crack propagation without a deformation, which means the proposed crack sensing tag can be reused.

The key advantage of the proposed method is the reusability of the RFID tags.

Epoxy zinc-rich coatings are widely used in harsh environments because of the long-lasting cathodic protection of steel surfaces. The purpose of this paper is to use flake zinc powder instead of the commonly used spherical zinc powder to reduce the zinc powder content.

In this paper, the authors have prepared an anticorrosive zinc-rich coating using a flake zinc powder instead of the conventional spherical zinc powder. The optimal dispersion of scaly zinc powder in zinc-rich coatings has been explored by looking at the surface and cross-sectional morphology and studying the cathodic protection time of the coating.

The final epoxy zinc-rich coating with 35 Wt.% flake zinc powder content was prepared using sand-milling dispersions. It has a similar cathodic protection time and salt spray resistance as the 60 Wt.% spherical zinc-rich coating, with a higher low-frequency impedance modulus value.

This study uses flake zinc powder instead of the traditional spherical zinc powder. This reduces the amount of zinc powder in the coating and improves the corrosion resistance of the coating.

The purpose of this paper was to research the influence of polyaniline/montmorillonite (PANI/OMMT) composite powder content on the corrosion protection of epoxy (EP) coating.

The polyaniline/montmorillonite/epoxy (PANI/OMMT/EP) coatings containing different contents of PANI/OMMT composite powder were prepared on steel. The corrosion protection performances of PANI/OMMT/EP coatings in 3.5 per cent NaCl solutions were investigated by electrochemical impedance spectroscopy. The barrier property of coatings was examined using water absorption analysis. The structure and crosslink density of coatings were examined using scanning electron microscopy and differential scanning calorimetry, respectively.

The PANI/OMMT composite powder could enhance the barrier properties of the EP coating and reduce the corrosion rate of the steel beneath the coating. The coating showed the best corrosion protection performance when 3 per cent PANI/OMMT powder was added to the coating.

The research clarified the influence of PANI/OMMT content on the corrosion protection of coating from two aspects: one is the barrier performance of the coating; the other is the corrosion inhibitors for metal substrate.