Search results

The authors aim to present a vision based wide area registration method for camera phones based mobile augmented reality applications.

The tracking system uses a drift‐free 6 DOF tracker based on prebuilt multiple maps, and can be initialized using the authors' compacted key‐frames recognition engine.

Given the current location and camera pose, the authors show how the corresponding virtual objects can be accurately superimposed even in the case of varying user positions.

The authors' system can be used in wide area scenarios and provides an accurate registration between real and virtual objects.

Due to the increasing size and complexity of construction projects, construction engineering and management involves the coordination of many complex and dynamic processes and relies on the analysis of uncertain, imprecise and incomplete information, including subjective and linguistically expressed information. Various modelling and computing techniques have been used by construction researchers and applied to practical construction problems in order to overcome these challenges, including fuzzy hybrid techniques. Fuzzy hybrid techniques combine the human-like reasoning capabilities of fuzzy logic with the capabilities of other techniques, such as optimization, machine learning, multi-criteria decision-making (MCDM) and simulation, to capitalise on their strengths and overcome their limitations. Based on a review of construction literature, this chapter identifies the most common types of fuzzy hybrid techniques applied to construction problems and reviews selected papers in each category of fuzzy hybrid technique to illustrate their capabilities for addressing construction challenges. Finally, this chapter discusses areas for future development of fuzzy hybrid techniques that will increase their capabilities for solving construction-related problems. The contributions of this chapter are threefold: (1) the limitations of some standard techniques for solving construction problems are discussed, as are the ways that fuzzy methods have been hybridized with these techniques in order to address their limitations; (2) a review of existing applications of fuzzy hybrid techniques in construction is provided in order to illustrate the capabilities of these techniques for solving a variety of construction problems and (3) potential improvements in each category of fuzzy hybrid technique in construction are provided, as areas for future research.

This paper aims to summarize the current state of research on risk, crisis and disaster management in the generic field, and in tourism and hospitality. It identifies key themes and compares the main topics studied in both the tourism and hospitality management and marketing literature.

A narrative (thematic) review and synthesis was completed based on articles published in the top 20 tourism and hospitality management journals from 2011 to March 2021. A review was conducted of the generic literature from 2016 to 2020.

From 210 papers reviewed, only 47 are in the hospitality field. The authors found that 80% of papers were empirical with slightly more quantitative papers produced. The majority of the papers focused on crises. Three key themes were found from the review and future research proposed to address gaps based on these findings and a review of 26 papers from the generic risk, crisis and disaster management field.

Research is required into planning and preparedness, not just response and recovery to crises and disasters. Future research should consider hospitality rather than tourism, particularly focusing attention outside of the accommodation sector. Hospitality studies also need to go beyond the micro-organizational level to include more meso- and macro-level studies.

The review provides a number of future research directions for tourism and hospitality research in the field. The paper provides a comprehensive multi-dimensional framework to synthesize studies and identifies research gaps. It also provides recommendations on methodologies required to progress these research directions. Research in this field is likely to grow because of the impact of COVID-19.

Presents a method of Max‐Fit biarc curve fitting technique to improve the accuracy of STL files and to reduce the file size for rapid prototyping. STL file has been widely accepted as a de facto standard file format for the rapid prototyping industry. However, STL format is an approximated representation of a true solid/surface model, and a huge amount of STL data is needed to provide sufficient accuracy for rapid prototyping. Presents a Max‐Fit biarc curve fitting technique to reconstruct STL slicing data for rapid prototyping. The Max‐Fit algorithm progresses through the STL slicing intersection points to find the most efficient biarc curve fitting, while improving the accuracy. Our results show that the proposed biarc curve‐fitting technique can significantly improve the accuracy of poorly generated STL files by smoothing the intersection points for rapid prototyping. Therefore, less strict requirements (i.e. loose triangle tolerances) can be used while generating the STL files.

The purpose of this paper is to describe a strap‐down image stable strategy for multi‐load optoelectronic imaging platform hung below a tethered aerostat.

Four two dimension pods, each with a visible light camera, are fixed on the optoelectronic platform. A POS (Position and Orientation System) is used to acquire the attitude rate data of optoelectronic platform, while the data can be coupled to the pods' servo systems through corresponding coordinate rotation, then the motors of pods will adjust the line of sight to the opposite way to keep the stabilization of image exported by visible light camcorders. Simultaneously, two rate gyros are installed at the inner frame of each pod, which are used as a backup to avoid the failure of POS.

Using one attitude and position measurement system can realize the stabilization of multi optoelectronic pods, which is same as or even better than the ratio gyro stabilization.

As the tethered aerostat is a flexible body, it is affected a lot by the wind speed and wind direction at the low height (<1,000 m), which leads to the motors of pods always adjust the line of sight to the mechanical limiting of pods.

Strap‐down stabilization technology has been successfully used in the tethered aerostat monitoring platform to surveillance Shanghai World EXPO site. Long time experiments verify the feasible and effective of the multi‐load stabilization technology. The impact on the image by the adjustment of servos is less than 10 percent of the whole view of sight.

The paper introduces a strap‐down stabilization technology for multi‐load tethered aerostat platform, which is more suitable to be applied in the platform of relatively minor attitude change, like the airborne multi‐load platform and multi‐load UAV (unmanned aerial vehicle) platform.

Since carbon nanotubes (CNTs) were discovered by Iijima in 1991, they have gained more and more attention by people because of their unique physical and chemical properties. The CNTs have one-dimensional nanostructure, high surface adsorption capacity, good conductivity and electronic ballistic transmission characteristics and therefore have excellent mechanical, electrical, physical and chemical properties. CNTs are ideal basic materials to make nanometer gas sensors. Nanometallic materials function as to enhance electrode activity and promote the electron transfer, so if composite nanometallic materials M (such as Au, Pt, Cu and Pd) and CNTs are used, all kinds of their characters of components would have coeffect. Electrochemical sensors by use of such composite as electrode would have a higher detection sensitivity.

CNTs were synthesized via chemical vapor deposition technique and were purified afterward. CNTs-M(Pt,Au) suspension was prepared by chemical deposition using spinning disc processor (SDP) and was coated on gold electrode. The modified electrodes were constructed, based on immobilization of glucose oxidase on an Au electrode by electrostatic effect. CNTs-Pt/ glassy carbon electrodes (GCE) electrodes were made by electrochemically deposition of platinum particles on GCE modified by CNTs. The microstructures of the harvested CNTs, CNTs-M (M = Au, Pt) were analyzed under scanning electron microscopy and transmission electron microscopy. The application of the sensor in medical detection has been evaluated.

The results shown that CNTs-Au biosensors exhibit good reproducibility, stability and fast response to glucose detection, it can be used in the clinic detection of glucose concentration in human serum. Using CNTs-Pt/GCE for formaldehyde detection exhibited high sensitivity and good reproducibility.

This study modified CNTs by using self-assembled techniques through SDP with nano Pt and Au by electrodeposition for the first time. CNTs-Pt/GCE electrode was prepared by depositing platinum particles electrochemically on GCE modified by CNTs. CNTs-Au-modified electrode was prepared by immobilization of glucose oxidase on an Au electrode first by electrostatic effect. Electrochemical behaviors of glucose at CNTs-Au and formaldehyde at CNTs-Pt/GCE were investigated by cyclic voltammetry.

The purpose of this paper was to research the influence of polyaniline/montmorillonite (PANI/OMMT) composite powder content on the corrosion protection of epoxy (EP) coating.

The polyaniline/montmorillonite/epoxy (PANI/OMMT/EP) coatings containing different contents of PANI/OMMT composite powder were prepared on steel. The corrosion protection performances of PANI/OMMT/EP coatings in 3.5 per cent NaCl solutions were investigated by electrochemical impedance spectroscopy. The barrier property of coatings was examined using water absorption analysis. The structure and crosslink density of coatings were examined using scanning electron microscopy and differential scanning calorimetry, respectively.

The PANI/OMMT composite powder could enhance the barrier properties of the EP coating and reduce the corrosion rate of the steel beneath the coating. The coating showed the best corrosion protection performance when 3 per cent PANI/OMMT powder was added to the coating.

The research clarified the influence of PANI/OMMT content on the corrosion protection of coating from two aspects: one is the barrier performance of the coating; the other is the corrosion inhibitors for metal substrate.

Epoxy zinc-rich coatings are widely used in harsh environments because of the long-lasting cathodic protection of steel surfaces. The purpose of this paper is to use flake zinc powder instead of the commonly used spherical zinc powder to reduce the zinc powder content.

In this paper, the authors have prepared an anticorrosive zinc-rich coating using a flake zinc powder instead of the conventional spherical zinc powder. The optimal dispersion of scaly zinc powder in zinc-rich coatings has been explored by looking at the surface and cross-sectional morphology and studying the cathodic protection time of the coating.

The final epoxy zinc-rich coating with 35 Wt.% flake zinc powder content was prepared using sand-milling dispersions. It has a similar cathodic protection time and salt spray resistance as the 60 Wt.% spherical zinc-rich coating, with a higher low-frequency impedance modulus value.

This study uses flake zinc powder instead of the traditional spherical zinc powder. This reduces the amount of zinc powder in the coating and improves the corrosion resistance of the coating.

The purpose of this paper is to enhance the compatibility of titanium dioxide in epoxy resins and thus the corrosion resistance of the coatings.

In this work, TiO₂ was modified by the mechanochemistry method where mechanical energy was combined with thermal energy to complete the modification. The stability of modified TiO₂ in epoxy was analyzed by sedimentation experiment. The modified TiO₂-epoxy coating was prepared, and the corrosion resistance of the coating was analyzed by open circuit potential, electrochemical impedance spectroscopy and neutral salt spray test.

High-temperature mechanical modification can improve the compatibility of TiO₂ in epoxy resin. At the same time, the modified TiO₂-epoxy coating showed better corrosion resistance. Compared to the unmodified TiO₂-epoxy coating, the coating improved the dry adhesion force by 61.7% and the adhesion drop by 33.3%. After 2,300 h of immersion in 3.5 Wt.% NaCl solution, the coating resistance of the modified TiO₂ coating was enhanced by nearly two orders of magnitude compared to the unmodified coating.

The authors have grafted epoxy molecules onto TiO₂ surfaces using a high-temperature mechanical force modification method. The compatibility of TiO₂ with epoxy resin is enhanced, resulting in improved adhesion of the coating to the substrate and corrosion resistance of the coating.

The purpose of this paper is to investigate the impact of cloud computing (CC) on supply chain management (SCM).

The paper is conceptual and based on a literature review and conceptual analysis.

Today, digital technology is the primary enabler of supply chain (SC) competitiveness. CC capabilities support competitive SC challenges through structural flexibility and responsiveness. An Internet platform based on CC and a digital ecosystem can serve as “information cross-docking” between SC stakeholders. In this way, the SC model is transformed from a traditional, linear model to a platform model with the simultaneous cooperation of all partners. Platform-based SCs will be a milestone in the evolution of SCM – here conceptualised as Supply Chain 3.0.

Currently, SCs managed holistically in cyberspace are rare in practice, and therefore empirical evidence on how digital technologies impact SC competitiveness is required in future research.

This research generates insights that can help managers understand and develop the next generation of SCM with the use of CC, a modern and commonly available Information and Communication Technologies (ICT) tool.

The paper presents a conceptual basis of how CC enables structural flexibility of SCs through easy, real-time resource and capacity reconfiguration. CC not only reduces cost and increases flexibility but also offers an effective solution for disruptive new business models with the potential to revolutionise current SCM thinking.