Search results

The purpose of this paper is to develop a bi-objective optimization framework to select prefabricated construction service composition. An improved algorithm-genetic simulated annealing algorithm (GSA) is employed to demonstrate the application of the framework.

The weighted aggregate multi-dimensional collaborative relationship is used to quantitatively evaluate the synergistic effect. The quality of service is measured using the same method. The research proposed a service combination selection framework of prefabricated construction that comprehensively considers the quality of service and synergistic effect. The framework is demonstrated by using a GSA that can accept poor solutions with a certain probability. Furthermore, GSA is compared with the genetic algorithm (GA), simulated annealing algorithm (SA) and particle swarm optimization algorithm (PSO) to validate the performance.

The results indicated that GSA has the largest optimal fitness value and synergistic effect compared with other algorithms, and the convergence time and convergence iteration of the improved algorithm are generally at a low level.

The contribution of this study is that the proposed framework enables project managers to clarify the interactions of the prefabricated construction process and provides guidance for project collaborative management. In addition, GSA helps to improve the probability of successful collaboration between potential partners, therefore enhancing client satisfaction.

The purpose of this paper is to obtain risk indicators of water security of drought periods in which the indices of reliability, resiliency, and vulnerability are integrated.

It is not reasonable that weight coefficients of different risk indices are often determined subjectively in conventional procedures, so the entropy weight method is introduced and chosen to solve the problem. Entropy weight method can get the weight coefficients of different risk indices objectively and is valid from the case study.

The feasibility and validity of entropy weight methods to determine weight coefficients of different risk indices objectively are recognized.

Accessibility and availability of data are the main limitations.

The paper provides a more objective risk indicator of water security of drought periods for water resources managers.

This paper determines the weight coefficients of different risk indices for risk assessment of water security of drought periods based on hazard entropy. The paper is aimed at water resources managers and relative researchers, especially those who deal with risk assessment of water security of drought periods.

During service period, due to the overload or other non-load factors, diagonal cracks of the pre-stressed concrete beam are seriously affecting the safety of the bridge structure. The purpose of this paper is to quickly realize the shear bearing capacity and shear stiffness through maximum width of the diagonal cracks and make correct judgments.

Through the shear failure test of four test beams, collecting data of diagonal cracks and shear stiffness loss value. According to the deformation curve of the shear stiffness, and combined with the calculation formula of the maximum width of diagonal cracks, the formula for calculating the effective shear stiffness based on the maximum width of diagonal cracks is deduced, then the results are verified by test data. Data regression method is used to establish the effective shear stiffness loss ratio calculation formula, the maximum width of diagonal cracks used as a variable factor, and the accuracy of this formula is verified by comparing the shear failure test results of pre-stressed hollow plates.

With the increase in width of the diagonal crack, the loss rate of shear stiffness of the concrete beams is initially fast and then becomes slow. The calculation formulae for shear stiffness based on the maximum width of the diagonal cracks were deduced, and the feasibility and accuracy of the formulae were verified by analysis and calculation of shear test data.

A method for quickly determine the shear stiffness loss of structures by using maximum width of the diagonal cracks is established, and using this method, engineers can quickly determine effective shear stiffness loss ratio, without complex calculations. So this method not only ensures the safety of human life, but also saves money.

During service period, due to the overload or other non-load factors, cracks of the pre-stressed concrete beam are seriously affecting the safety of the bridge structure. The purpose of this paper is to quickly realize the bearing capacity and the loss of the section stiffness through fracture characteristics and make correct judgments.

Through the flexural failure test of two test beams: collecting data of fracture characteristics and section stiffness loss value. According to the fracture characteristic data, the flexural stiffness of the section is obtained by the nonlinear calculation method, and the results are verified by test data. Data regression method is used to establish the section flexural stiffness loss ratio calculation formula, nominal tensile strain at the bottom edge of the cross-section used as a variable factor, and the accuracy of this formula is verified by comparing the flexural failure test results of pre-stressed hollow plates.

The loss of the flexural stiffness of section shows the decrease trend of first-fast-then-slow and the structural stiffness is sensitive to the initial cracking of beam. The calculation formula on the loss ratio of the flexural stiffness of section established with the nominal tensile stress at the bottom edge of beam as a variable is accurate and feasible, it realizes the possibility of assessing the stiffness loss of pre-stressed concrete structure by adopting the statistic parameters on crack characteristics.

A method for quickly determine the stiffness loss of structures by using fracture characteristics is established, and using this method, engineers can quickly determine whether a bridge is a dangerous bridge, without loading test. So, this method not only ensures the safety of human life, but also saves money.

During service period, the bridge structures will be affected by the environment and load, so the carrying capacity will decline. The purpose of this paper is to research on the bearing capacity of bridge structures with time.

Destructive test and non-linear finite element analysis are carried out by utilizing two pretensioning prestressed concrete hollow slabs in service for 20 years; using the structural test deflection value to simulate the stiffness degradation of the service bridge and the finite element calculation results verify the accuracy of the calculation.

The flexural rigidity of the main beam when the test beam is destructed is degraded to approximately 20 percent of that before the test, which agrees well with the result of finite element analysis and indicates that the method of deducing the flexural rigidity of the structure according to the measured deflection value can effectively simulate the rigidity degradation law of the bridge in service. The crack resistance property of the test beam degrades obviously and the ultimate bearing capacity of the bending resistance does not degrade obviously.

The research results truly reflect the destruction process, destructive form, bearing capacity and rigidity degradation law of the old beam of the concrete bridge in service for 20 years and can provide technical basis for optimization design of newly built bridges of the same type and maintenance and reinforcement design of existing old bridges.

In the freeze-thaw zone, the pre-stressed concrete of bridge structure will be damaged by freezing-thawing, the bearing capacity of structure will decrease and the safety will be affected. The purpose of this paper is to establish the time-dependent resistance degradation model of structure in the freeze-thaw zone, and analysis the structural reliability and remaining service life in different freeze-thaw zones.

First, according to the theory of structural design, a calculation model of the resistance of pre-stressed concrete structures in f freeze-thaw zone is established. Second, the time-dependent resistance model was verified by the test beam bending failure test results done by the research group, which has been in service for 20 years in freeze-thaw zone. Third, using JC algorithm in MATLAB to calculate the index on the reliability of pre-stressed concrete structure in frozen thawed zones, forecasting the s remaining service life of structure.

First, the calculation model of the resistance of pre-stressed concrete structures in freeze-thaw zone is accurate and it has excellent applicability. Second, the structural resistance deterioration time in Wet-Warm-Frozen Zone is the earliest. Third, once the pre-stressed reinforcement rusts, the structural reliability index will reach limit value quickly. Finally, the remaining service life of structure meets the designed expectation value only in a few of freeze-thaw zones in China.

The research will provide a reference for the design on the durability of a pre-stressed concrete structure in the freeze-thaw zone. In order to verify the security of pre-stressed concrete structures in the freeze-thaw zone, engineers can use the model presented in this paper for durability checking, it has an important significance.

The calculation of the crack width is necessary for the design of prestressed concrete (PC) members. The purpose of this paper is to develop a numerical model based on the bond-slip theory to calculate the crack width in PC beams.

Stress calculation method for common reinforcement after beam crack has occurred depends on the difference in the bonding performance between prestressed reinforcement and common reinforcement. A numerical calculation model for determining the crack width in PC beams is developed based on the bond-slip theory, and verified using experimental data. The calculation values obtained by the proposed numerical model and code formulas are compared, and the applicability of the numerical model is evaluated.

The theoretical analysis and experimental results verified that the crack width of PC members calculated based on the bond-slip theory in this study is reasonable. Furthermore, the stress calculation method for the common reinforcement is verified. Compared with the model calculation results obtained in this study, the results obtained from code formulas are more conservative.

The numerical calculation model for crack width proposed in this study can be used by engineers as a reference for calculating the crack width in PC beams to ensure the durability of the PC member.

The calculation of the shear capacity of inclined section for prestressed reinforced concrete beams is an important topic in the design of concrete members. The purpose of this paper, based on the truss-arch model, is to analyze the shear mechanism in prestressed reinforced concrete beams and establish the calculation formula for shear capacity.

Considering the effect of the prestressed reinforcement axial force on the angle of the diagonal struts and regression coefficient of softening cocalculation of shear capacity is established. According to the shape of the cracks of prestressed reinforced concrete beams under shear compression failure, the tie-arch model for the calculation of shear capacity is established. Shear-failure-test beam results are collected to verify the established formula for shear bearing capacity.

Through theoretical analysis and experimental beam verification, it is confirmed in this study that the truss-arch model can be used to analyze the shear mechanism of prestressed reinforced concrete members accurately. The calculation formula for the angle of the diagonal struts chosen by considering the effect of prestress is accurate. The relationship between the softening coefficient of concrete and strength of concrete that is established is correct. Considering the effect of the destruction of beam shear plasticity of the concrete on the surface crack shape, the tie-arch model, which is established where the arch axis is parabolic, is applicable.

The formula for shear capacity of prestressed reinforced concrete beams based on this theoretical model can guarantee the effectiveness of the calculation results when the structural properties vary significantly. Engineers can calculate the parameters of prestressed reinforced concrete beams by using the shear capacity calculation formula proposed in this paper.

The purpose of this paper is to find a new method to evaluate the hydrogen embrittlement performance of heterogeneous materials and thin film materials.

The changes of hydrogen embrittlement properties of steel were studied by electrochemical hydrogen charging test and scratch test. The microstructure and properties of the alloy were analyzed by hardness tester, scanning electron microscope and three-dimensional morphology. The fracture toughness before and after hydrogen charging was calculated based on the scratch method.

The results showed that the hydrogen-induced hardening phenomenon occurs in the material after hydrogen charging. The scratch depth and width increased after hydrogen charging. The fracture toughness obtained by the scratch method showed that hydrogen reduces the fracture toughness of the material. The comparison error of fracture toughness calculated by indentation method was less than 5%.

The results show that the scratch method can evaluate the hydrogen embrittlement performance of the material. This method provides a possibility to evaluate the hydrogen embrittlement of thin-film and heterogeneous materials.

Most existing studies are confined to model beam tests, which cannot reflect the actual strengthening effects provided by prestressed carbon-fiber-reinforced polymer (CFRP) plates to existing bridges. Hence, the actual capacity for strengthening existing bridges with prestressed CFRP plates is becoming an important concern for researchers. The paper aims to discuss these issues.

Static load tests of in-service prestressed concrete hollow slabs before and after strengthening are conducted. Based on the results of the tests, the failure characteristics, failure mechanism and bending performance of the slabs are compared and analyzed. Nonlinear finite element method is also used to calculate the flexural strength of the strengthened beams prestressed with CFRP plates.

Test results show that prestressed CFRP plate strengthening technology changes the failure mode of hollow slabs, delays the development of deflection and cracks, raises cracking and ultimate load-carrying capacity and remarkably improves mechanical behavior of the slab. In addition, the nonlinear finite element analyses are in good agreement with the test results.

Strengthening with prestressed CFRP plates has greater advantages compared to traditional CFRP plate strengthening technology and improves active material utilization. The presented finite element method can be applied in the flexural response calculations of strengthened beams prestressed with CFRP plates. The research results provide technical basis for maintenance and reinforcement design of existing bridges.