Search results

1 – 10 of 20
Article
Publication date: 3 April 2017

Yanan Feng, Bin Hao, Paul Iles and Nicola Bown

Studies of distributed leadership (DL) are increasing, but are not systematic, often taking a normative position emphasizing the superiority of DL to solo leadership and using the…

2744

Abstract

Purpose

Studies of distributed leadership (DL) are increasing, but are not systematic, often taking a normative position emphasizing the superiority of DL to solo leadership and using the term in an imprecise way. The purpose of this paper is to re-conceptualize DL and develop a systematic framework to identify dimensions of DL and their association with team effectiveness.

Design/methodology/approach

Based on a comprehensive review of existing literature, this paper develops a systematic framework of DL and team effectiveness by deriving eight research propositions.

Findings

Based on two perspectives, role space occupation and dependency of actions, the paper identifies four main dimensions of DL: shared, conjoint, fragmented and dispersed leadership, each of which represents a specific pattern of DL activities. A leader-task-context (LTC) framework is developed to analyze outcomes of DL dimensions in different settings. The eight propositions developed clearly identify where DL can be best applied, how particular configurations of DL affect team performance, and in what situations it is most effective.

Originality/value

This paper has made several contributions. First, the authors address the question of what constitutes DL by conceptualizing its dimensions. Second, the authors extend the DL literature by arguing and modeling how different contexts influence the fulfillment of DL. Third, the authors develop an analytical framework of DL – the “LTC” framework – to help build a foundation and guide further research on the relationships between DL and team performance.

Details

Leadership & Organization Development Journal, vol. 38 no. 2
Type: Research Article
ISSN: 0143-7739

Keywords

Article
Publication date: 12 October 2021

Jiangfeng Ye, Yingna Jiang, Bin Hao and Yanan Feng

This study aims to explore the impact of search breadth and depth on corporate entrepreneurship (CE) through the mediating effect of opportunity discovery under the consideration…

Abstract

Purpose

This study aims to explore the impact of search breadth and depth on corporate entrepreneurship (CE) through the mediating effect of opportunity discovery under the consideration of the technological environmental dynamism as a moderating factor.

Design/methodology/approach

This study adopts a quantitative method, collecting 246 questionnaires from high-tech firms in the national industrial park of the Yangtze River Delta zone in China. The authors examine the hypotheses using multiple hierarchical regressions and conduct Sobel and bootstrapping tests to further assess the mediating and moderated mediating effects of the variables.

Findings

The results indicate that both the relationship between search breadth and CE and the relationship between search depth and CE are mediated by opportunity discovery. The authors further show that technological environmental dynamism positively moderates the indirect effect of knowledge search breadth on CE and negatively moderates the indirect effect of knowledge search depth and CE.

Originality/value

This study provides a valuable theoretical framework for entrepreneurship literature by differentiating the effects of search depth and search breadth on the promotion of CE in established firms and pioneers the examination of the mediating role of opportunity discovery and the moderating role of technological environmental dynamism in these links as well.

Details

European Journal of Innovation Management, vol. 26 no. 2
Type: Research Article
ISSN: 1460-1060

Keywords

Article
Publication date: 5 May 2023

Jiangfeng Ye, Shunqing Shi and Yanan Feng

This investigation seeks to elaborate on how proactive market orientation (MO) and responsive MO motivate firms to conduct business model innovation (BMI) through the breadth of…

Abstract

Purpose

This investigation seeks to elaborate on how proactive market orientation (MO) and responsive MO motivate firms to conduct business model innovation (BMI) through the breadth of market knowledge search (BMKS) and the depth of market knowledge search (DMKS).

Design/methodology/approach

Based on the survey data of 259 high-tech firms in the industrial parks of the Yangtze River Delta, this study uses multiple hierarchical regressions to examine the hypotheses and conducts Sobel and bootstrapping methods to further test the mediating effects.

Findings

The findings indicate that the positive effects of proactive and responsive MO on BMI are mediated by BMKS and DMKS. It also shows that proactive MO has a greater impact on BMKS than responsive MO, while responsive MO has a stronger impact on DMKS than proactive MO.

Practical implications

Firms with different MOs can choose different types of market knowledge search to promote BMI, which reminds managers to give attention to the importance of bridging MOs with knowledge search strategies in BMI.

Originality/value

This study introduces a constructive theoretical framework by examining the roles of MO and market knowledge search on BMI. The findings reveal that MO as a key initiating factor and market knowledge search as an important conduit play vital roles in the experimental process of BMI and identify the differential effects of proactive and responsive MO on two types of market knowledge search.

Details

European Journal of Innovation Management, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1460-1060

Keywords

Article
Publication date: 30 November 2018

Yanqin Zhang, Pengrui Kong, Yanan Feng and Lili Guo

To investigate the effects of hot oil carrying (HOC), the purpose of this paper is to present a new calculation method of oil film temperature which takes the effects into account…

Abstract

Purpose

To investigate the effects of hot oil carrying (HOC), the purpose of this paper is to present a new calculation method of oil film temperature which takes the effects into account and defines the factor of HOC.

Design/methodology/approach

Based on finite volume method, the paper studied the temperature characteristics in high speed and the condition of variable viscosity from the temperature field and flow field of the film, and the thermal rule of HOC is revealed. The theoretical values are in good agreement with the experimental results.

Findings

The results show that, for this structure of hydrostatic bearing, the phenomenon of HOC does not occur until the work speed is more than 10 r/min under any load condition. And it always happens in the total range of load, from 0 to 320 kN, when the speed is over 60 r/min. Moreover, the film temperature increases sharply, when the phenomenon happens in high speed, and the influence of the speed is greater than the effect of load on the temperature rise.

Originality/value

The results would help to increase the speed of CNC machine tools and the design on structure of the bearing in engineering practice.

Details

Industrial Lubrication and Tribology, vol. 71 no. 1
Type: Research Article
ISSN: 0036-8792

Keywords

Article
Publication date: 4 July 2016

Bin Hao and Yanan Feng

This paper aims to offer a novel set of insights to understand the role of network ties in pursuit of radical innovation. In this sense, the purpose of the study is to analyze how…

1477

Abstract

Purpose

This paper aims to offer a novel set of insights to understand the role of network ties in pursuit of radical innovation. In this sense, the purpose of the study is to analyze how the heterogeneity in the content of network ties affects radical innovation performance.

Design/methodology/approach

Based on a comprehensive review of existing literature, this paper conceptualizes how different types of network ties affect radical innovation performance by deriving five research propositions.

Findings

Both buyer-supplier ties and peer collaboration ties are positively related to radical innovation performance, whilst the peer collaboration ties may be further affected by partner similarity. Compared to other two types of network ties, equity ties act as more of moderating roles on spurring radical innovation. Crowding out between network ties prevents firms from knowledge searching within an extensive network scope, reducing the opportunities of mixing and matching different kinds of knowledge needed for radical innovation.

Research limitations/implications

The study suggests a natural way of launching marketing strategy by selectively integrating different sources of knowledge (market, supplier or technology) needed for commercializing radical technologies, highlighting the importance of partner selection for radical innovation among different types of firms surrounding the current market. For managers, it is necessary to identify and select network ties helpful for long-term business and strategic interests.

Originality/value

This paper makes two main contributions. First, it addresses the question of how networks influence radical innovation by identifying three types of network ties and their effects – individual and in combination – on extension of the depth and breadth of knowledge and development of disruptive ideas. Second, it develops the existing literature by demonstrating the crowding-out effect of network ties.

Details

Journal of Business & Industrial Marketing, vol. 31 no. 6
Type: Research Article
ISSN: 0885-8624

Keywords

Article
Publication date: 19 May 2021

Yanqiu Xia, Yanan Cao, Xin Feng and Haris M_ P_

The purpose of this paper is to compare the electrical conductivity and tribological properties of magnetron sputtered silver (Ag), copper (Cu) and aluminum (Al) thin films under…

Abstract

Purpose

The purpose of this paper is to compare the electrical conductivity and tribological properties of magnetron sputtered silver (Ag), copper (Cu) and aluminum (Al) thin films under conductive grease lubrication.

Design/methodology/approach

Three types of silver (Ag), copper (Cu) and aluminum (Al) thin films were prepared by magnetron sputtering. Current-carrying friction tests were carried out by a ball-on-plate reciprocating friction and wear tester. Scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX) were used to observe and analyze the worn surface and cross-section morphology of the films.

Findings

Silver and Cu films exhibited good conductivity and tribological properties, which were mainly attributed to the synergy of the protective tribofilm generated by conductive grease, current-induced thermal effect and magnetron sputtered films effect. Al film was worn through. Large pitting storing lubricate were only found in Ag film. Cu film showed a similar surface uniformity with Ag film.

Originality/value

This study provides a reference for the design and application of conductive grease and investigates the current-carrying friction behaviors of magnetron sputtered films as electrical contact materials. The comparison of current-carrying friction behaviors of the three films was rarely covered in previous studies.

Details

Industrial Lubrication and Tribology, vol. 73 no. 10
Type: Research Article
ISSN: 0036-8792

Keywords

Article
Publication date: 4 February 2021

Junchao Li, Ran Yan, Yanan Yang and Feng Xie

The purpose of this study was to prepare water-based binders, which aimed to avoid printhead blockage and to improve dimensional accuracy of inkjet 3D printing (3DP) technology…

Abstract

Purpose

The purpose of this study was to prepare water-based binders, which aimed to avoid printhead blockage and to improve dimensional accuracy of inkjet 3D printing (3DP) technology, and a feasible algorithm of full-color printing was realized.

Design/methodology/approach

A self-developed color 3D printer was made by using a piezoelectric printhead of Epson Dx-5. Several water-based binders and corresponding gypsum composite powders were prepared, and the optimum binder-powder assembly was then determined through elementary adhesive testing and roller paving testing. Full-color printing was implemented based on halftoning algorithms that used different threshold matrices for different ink channels, and the performances of various algorithms were evaluated in terms of both subjective and objective indices.

Findings

The optimum binder-powder assembly can solve the jamming problem of printhead and realize agreeable dimensional accuracy with the relative error less than 2.5% owing to the satisfying boundary diffusion control ability. And the determined halftone algorithm was verified to be agreeable for 3D color printing.

Originality/value

The prepared approach of water-based binders and gypsum composite powders can be applied to similar 3DP systems even if different materials are introduced. And the used halftone algorithms provide feasible guidelines to the implementation of 3D full-color printing.

Details

Rapid Prototyping Journal, vol. 27 no. 3
Type: Research Article
ISSN: 1355-2546

Keywords

Article
Publication date: 29 June 2023

Yanan He, Xindong Zhang, Panpan Hao, Xiaoyong Dai and Haiyan Xue

This paper investigates whether China's R&D tax deduction policy triggers firms to manipulate their R&D expenditures upward.

Abstract

Purpose

This paper investigates whether China's R&D tax deduction policy triggers firms to manipulate their R&D expenditures upward.

Design/methodology/approach

This paper employs the ratio of actual tax savings as a proxy for the benefits of the R&D tax deduction policy based on manually collected and systematically cross-checked data. The relationship between tax benefits and abnormal R&D spending is estimated in a sample of Chinese A-share listed companies for the period 2007–2018.

Findings

The findings suggest that tax deductions lead to positive abnormal R&D spending and that this deviation in R&D spending may be attributed to firms' upward R&D manipulation for tax avoidance. The results also indicate that this behavior is more significant for the period after the policy revision, in non-HNTEs (high and new technology enterprises), and in firms with a high ratio of R&D expenses.

Research limitations/implications

It is difficult to establish a sophisticated and unified model to identify the specific strategy of upward R&D manipulation that firms use to obtain tax benefits.

Practical implications

Managers should take into account upward R&D manipulation when designing governance mechanisms. Policymakers in developing countries may further pursue preferential tax policies that cover every stage of innovation activities gradually; the local provincial governments need to leverage their proximity and flexibility advantages to develop a tax collection and administration system.

Originality/value

This study contributes to the understanding of the complex effect of R&D tax incentives and helps more fully illuminate firms' upward R&D manipulation behavior from the perspective of tax planning strategies, which are underexplored in previous research.

Details

International Journal of Emerging Markets, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1746-8809

Keywords

Article
Publication date: 3 August 2021

Denglin Fu, Yanan Wen, Jida Chen, Lansi Lu, Ting Yan, Chaohui Liao, Wei He, Shijin Chen and Lizhao Sheng

The purpose of this paper is to study an electrolytic etching method to prepare fine lines on printed circuit board (PCB). And the influence of organics on the side corrosion…

Abstract

Purpose

The purpose of this paper is to study an electrolytic etching method to prepare fine lines on printed circuit board (PCB). And the influence of organics on the side corrosion protection of PCB fine lines during electrolytic etching is studied in detail.

Design/methodology/approach

In this paper, the etching factor of PCB fine lines produced by new method and the traditional method was analyzed by the metallographic microscope. In addition, field emission scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) were used to study the inhibition of undercut of the four organometallic corrosion inhibitors with 2,5-dimercapto-1,3,4-thiadiazole, benzotriazole, l-phenylalanine and l-tryptophan in the electrolytic etching process.

Findings

The SEM results show that corrosion inhibitors can greatly inhibit undercut of PCB fine lines during electrolytic etching process. XPS results indicate that N and S atoms on corrosion inhibitors can form covalent bonds with copper during electrolytic etching process, which can be adsorbed on sidewall of PCB fine lines to form a dense protective film, thereby inhibiting undercut of PCB fine lines. Quantum chemical calculations show that four corrosion inhibitor molecules tend to be parallel to copper surface and adsorb on copper surface in an optimal form. COMSOL Multiphysics simulation revealed that there is a significant difference in the amount of corrosion inhibitor adsorbed on sidewall of the fine line and the etching area.

Originality/value

As a clean production technology, electrolytic etching method has a good development indicator for the production of high-quality fine lines in PCB industry in the future. And it is of great significance in saving resources and reducing environmental pollution.

Details

Circuit World, vol. 49 no. 1
Type: Research Article
ISSN: 0305-6120

Keywords

Article
Publication date: 17 October 2023

Yaobing Wei, Yanan Li, Jianhui Liu, Gai Wang, Yanlei Guo and Xuemei Pan

In practical engineering, oil filters often work under asymmetric cyclic loading. In order to improve the prediction accuracy of fatigue life of the oil filters under asymmetric…

Abstract

Purpose

In practical engineering, oil filters often work under asymmetric cyclic loading. In order to improve the prediction accuracy of fatigue life of the oil filters under asymmetric cyclic loading, the effect of strain ratio and low cycle fatigue plastic deformation on fatigue life need to be considered. This paper aims to discuss the aforementioned objective.

Design/methodology/approach

First, strain-controlled fatigue tests with strain ratios of 0, 0.5 and −1 were carried out on the oil filter material 2A70-T6 aluminum alloy, and the test data were used to obtain strain fatigue life curves at three strain ratios. Then, based on the idea of the constant life curve method, the average value of the ratio of the strain amplitude corresponding to different strain ratios under the same partial life was defined as the strain ratio factor. Finally, the elastic-plastic factor was modified by the strain ratio factor, and a new fatigue life prediction model considering the effect of strain ratio was proposed.

Findings

The proposed model was validated, respectively, by fatigue test data of 2A70-T6 aluminum alloy, 2124-T851 aluminum alloy and oil filter and the results of the proposed model were compared with the Coffin–Manson equation, Morrow model and Smith–Watson–Topper (SWT) model, showing that the proposed model had higher applicability and accuracy.

Originality/value

In this work, a strain ratio factor is established based on the idea of the constant life curve method, and the strain ratio factor is used to modify the introduced elastic-plastic factor, and then a new fatigue life prediction model considering the influence of strain ratio and low cycle fatigue plastic deformation on material fatigue damage accumulation is proposed. The results show that the prediction results of the proposed model are in good agreement with the experimental data, and the proposed model has good fatigue life prediction ability considering the influence of strain ratio and lays a foundation for the fatigue life prediction of the oil filter.

Details

International Journal of Structural Integrity, vol. 14 no. 6
Type: Research Article
ISSN: 1757-9864

Keywords

1 – 10 of 20