Search results

The circular economy is a production and consumption model that encourages people to share, lease, reuse, repair, refurbish and recycle existing materials and products for as long as possible. The blockchain-based circular economy is being used in many industries worldwide, but Indian electronic MSMEs face many problems in adopting a blockchain-based circular economy. The research aims to discover the barriers the electronic MSMEs face in adopting a blockchain-based circular economy and pull back from achieving environmental sustainability in their operations.

Fifteen barriers are identified from the literature review and finalized with experts' opinions. These barriers are evaluated by using interpretive structural modeling (ISM), MICMAC analysis and fuzzy TOPSIS method.

Lack of support from distribution channels, lack of traceability mechanism and customer attitudes toward purchasing remanufactured goods are identified as the most critical barriers.

The study will benchmark the electronic MSMEs in achieving environmental sustainability in the blockchain-based circular economy.

It is a study that not only establishes a hierarchical relationship among the barriers of blockchain adoption in Indian electronic MSMEs but also verifies the results with fuzzy TOPSIS method.

A porous cavity flow field generates entropy owing to energy and momentum exchange within the fluid and at solid barriers. The heat transport and viscosity effects on fluid and solid walls irreversibly generate entropy. This numerical study aims to investigate convective heat transfer together with entropy generation in a partially heated wavy porous cavity filled with a hybrid nanofluid.

The governing equations are nondimensionalized and the domain is transformed into a unit square. A second-order finite difference method is used to have numerical solutions to nondimensional unknowns such as stream function and temperature. This numerical computation is conducted to explore a wide range of regulating parameters, e.g. hybrid nano-particle volume fraction (σ = 0.1%, 0.33%, 0.75%, 1%, 2%), Rayleigh–Darcy number (Ra = 10, 10², 10³), dimensionless length of the heat source (ϵ = 0.25, 0.50,1.0) and amplitude of the wave (a = 0.05, 0.10, 0.15) for a number of undulations (N = 1, 3) per unit length.

A thorough analysis is conducted to analyze the effect of multiple factors such as thermal convective forces, heat source, surface corrugation factors, nanofluid volume fraction and other parameters on entropy generation. The flow and temperature fields are studied through streamlines and isotherms. The average Bejan number suggested that entropy generation is entirely dominated by irreversibility due to heat transport at Ra = 10, and the irreversibility due to the viscosity effect is severe at Ra = 10³, but the increment in s augments irreversibility due to the viscosity effect over the heat transport at Ra = 10².

To the best of the authors’ knowledge, this numerical study, for the first time, analyzes the influence of surface corrugation on the entropy generation related to the cooling of a partial heat source by the convection of a hybrid nanofluid.

The study investigates the impact of various factors that affect the business performance of micro-level women entrepreneurs in the UAE and India.

A conceptual model including the factors that impact the performance of micro-level women entrepreneurs is proposed. The proposed model was validated with data collected through a structured questionnaire based on a cross-sectional survey conducted in the UAE and India. The collected data was analyzed using the structural equations modeling approach.

Findings revealed that factors such as competitive aggressiveness, incubation, innovativeness, market orientation and risk-taking propensity have a positive impact on business performance and growth in both countries. Factors like training, learning and finance orientation did not affect business performance.

Gender plays an essential and influential role in developing countries with regard to entrepreneurship. This research attempts to uncover the often-neglected area of women entrepreneurship.

The purpose of this research is to design and develop a technique for polyphase code design for the radar system.

The proposed fractional harmony search algorithm (FHSA) performs the polyphase code design. The FHSA binds the properties of the harmony search algorithm and the fractional theory. An optimal fitness function based on the coherence and the autocorrelation is derived through the proposed FHSA. The performance metrics such as power, autocorrelation and cross-correlation measure the efficiency of the algorithm.

The performance metrics such as power, autocorrelation and cross-correlation is used to measure the efficiency of the algorithm. The simulation results show that the proposed optimal phase code design with FHSA outperforms the existing models with 1.420859, 4.09E−07, 3.69E−18 and 0.000581 W for the fitness, autocorrelation, cross-correlation and power, respectively.

The proposed FHSA for the design and development of the polyphase code design is developed for the RADAR is done to reduce the effect of the Doppler shift.

Fingerprints and blood samples are important for the identification of individuals and criminals. The present study aims to identify the predominant fingerprint patterns and the association between the fingerprint patterns and ABO–Rh blood groups in Omani population.

A cross-sectional study was conducted on 200 Omani individuals aged 18 years (104 males and 96 females). The imprints of all right and left-hand fingers were taken, and the types of the fingerprints were determined using a standard protocol. The blood group of all the subjects was recorded. Chi-square test was performed to identify the association between the fingerprint patterns and the ABO and Rh blood groups.

The loop fingerprint pattern was the most common in Omani subjects (49.4%), followed by whorl (44.9%) and arch (5.7%) pattern. A significant association (p < 0.001) was found between gender and fingerprint pattern. The loop was the highest occurring pattern in the females (54.6%), while the whorl was more in males (50.0%). The whorl pattern was the most common in the AB+ and O− groups. The loop was a predominant pattern in the A+, A−, B+, B− and O+ groups. The Chi-square test also revealed a significant correlation between different fingerprint patterns and blood groups of the subjects (p < 0.001).

The present study is an outcome of undergraduate student's research project thesis for the Doctor of Medicine (MD) program. The results of the present study may help in creating a data bank for biometrics, which can be useful for diagnosing associated diseases and also help in identification of individuals.

The purpose of this study is to assess the influence of Al and Ag addition on thermal, mechanical and shape memory properties of Cu-Al-Ag alloy.

The material is synthesized in a controlled atmosphere to minimize the reaction of alloying elements with the atmosphere. Cast samples were homogenized, then subjected to hot rolling and further betatized, followed by step quenching. Eight samples were chosen for study among which first four samples varied in Al content, and the next set of four samples varied in Ag composition.

The testing yielded a result that the increase in binary alloying element decreased transformation temperature range but increased entropy and elastic energy values. It also improved the shape memory effect and mechanical properties (UTS and hardness). An increase in ternary alloying element increased transformation temperature range, entropy and elastic energy values. The shape memory effect and mechanical properties are enhanced by the increase in ternary alloying element. The study revealed that compositional variation of Al should be limited to a range of 8 to 14 Wt.% and Ag from 2 to 8 Wt.%. Microstructural and diffraction studies identified the ß’1 martensite as a desirable phase for enhancing shape memory properties.

Numerous studies have been made in exploring the transformation temperature and phase formation for similar Cu-Al-Ag shape memory alloys, but their influence on shape memory effect was not extensively studied. In the present work, the influence of Al and Ag content on shape memory characteristics is carried out to increase the design choice for engineering applications of shape memory alloy. These materials exhibit mechanical and shape memory properties within operating ranges similar to other copper-based shape memory alloys.

This paper aims to present the simulation, fabrication and testing of a novel ultra-wide band (UWB) band-pass filters (BPFs) with better transmission and rejection characteristics on a low-loss Taconic substrate and analyze using the coupled theory of resonators for UWB range covering L, S, C and X bands for radars, global positioning system (GPS) and satellite communication applications.

The filter is designed with a bent coupled transmission line on the top copper layer. Defected ground structures (DGSs) like complementary split ring resonators (CSRRs), V-shaped resonators, rectangular slots and quad circle slots (positioned inwards and outwards) are etched in the ground layer of the filter. The circular orientation of V-shaped resonators adds compactness when linearly placed. By arranging the quad circle slots outwards and inwards at the corner and core of the ground plane, respectively, two filters (Filters I and II) are designed, fabricated and measured. These two filters feature a quasi-elliptic response with transmission zeros (TZs) on either side of the bandpass response, making it highly selective and reflection poles (RPs), resulting in a low-loss filter response. The transmission line model and coupled line theory are implemented to analyze the proposed filters.

Two filters by placing the quad circle slots outwards (Filter I) and inwards (Filter II) were designed, fabricated and tested. The fabricated model (Filter I) provides transmission with a maximum insertion loss of 2.65 dB from 1.5 GHz to 9.2 GHz. Four TZs and five RPs are observed in the frequency response. The lower and upper stopband band width (BW) of the measured Filter I are 1.2 GHz and 5.5 GHz of upper stopband BW with rejection level greater than 10 dB, respectively. Filter II (inward quad circle slots) operates from 1.4 GHz to 9.05 GHz with 1.65 dB maximum insertion loss inside the passband with four TZs and four RPs, which, in turn, enhances the filter characteristics in terms of selectivity, flatness and stopband. Moreover, 1 GHz BW of lower and upper stopbands are observed. Thus, the fabricated filters (Filters I and II) are therefore evaluated, and the outcomes show good agreement with the electromagnetic simulation response.

The limitation of this work is the back radiation caused by DGS, which can be eradicated by placing the filter in the cavity and retaining its performance.

The proposed UWB BPFs with novel resonators find their role in the UWB range covering L, S, C and X bands for radars, GPS and satellite communication applications.

To the best of the authors’ knowledge, for the first time, the authors develop a compact UWB BPFs (Filters I and II) with BW greater than 7.5 GHz by combining reformed coupled lines and DGS resonators (CSRRs, V-shaped resonators [modified hairpin resonators], rectangular slots and quad circle slots [inwards and outwards]) for radars, GPS and satellite communication applications.

The paper aims to throw light on the interactions taking place between the different chemical compositions at various temperatures. P-methylacetophenone is a polar dissolvable, which is positively related by dipole–dipole co-operations and is exceptionally compelling a direct result of the shortfall of any critical primary impacts because of the absence of hydrogen bonds; hence, it might work an enormous dipole moment (μ = 3.62 D). Alcohols additionally assume a significant part in industries and research facilities as reagents and pull in incredible consideration as helpful solvents in the green innovation. They are utilized as pressure-driven liquids in drugs, beauty care products, aromas, paints removers, flavors, dye stuffs and as a germ-free specialist.

Mixtures were prepared by mass in airtight ground stopper bottles. The mass measurements were performed on a digital electronic balance (Mettler Toledo AB135, Switzerland) with an uncertainty of ±0.0001 g. The uncertainty in mole fraction was thus estimated to be less than ±0.0001. The densities of pure liquids and their mixtures were determined using a density meter (DDH-2911, Rudolph Research Analytical). The instrument was calibrated frequently using deionized doubly distilled water and dry air. The estimated uncertainty associated with density measurements is ±0.0003 g.cm⁻³. Viscosities of the pure liquids and their mixtures were determined by using Ostwald’s viscometer. The viscometer was calibrated at each required temperature using doubly distilled water. The viscometer was cleaned, dried and is filled with the sample liquid in a bulb having capacity of 10 ml. The viscometer was then kept in a transparent walled water bath with a thermal stability of ±0.01K for about 20 min to obtain thermal equilibrium. An electronic digital stop watch with an uncertainty of ±0.01 s was used for the flow time measurements for each sample at least four readings were taken and then the average of these was taken.

Negative values of excess molar volume, excess isentropic compressibility and positive values of deviation in viscosity including excess Gibbs energy of activation of viscous flow at different temperatures (303.15, 308.15 and 313.15 K) may be attribution to the specific intermolecular interactions through the hetero-association interaction between the components of the mixtures, resulting in the formation of associated complexes through hydrogen bond interactions.

The excess molar volume (V^E) values were analyzed with the Prigogine–Flory–Patterson theory, which demonstrated that the free volume contribution is the one of the factors influencing negative values of excess molar quantities. The Jouyban–Acree model was used to correlate the experimental values of density, speed of sound and viscosity.

Post COVID-19 crisis, healthcare has become a priority for every government. Furthermore, the pandemic has also made us realise why do we need an affordable healthcare delivery service at the grassroots level. As a result, the Government of India has come out with the Ayushman Sahakar scheme. This scheme has been launched by the Union Government with an aim to assist the cooperatives in the creation of healthcare infrastructure in this country. It is pertinent to note that the cooperatives in the last few years have transformed rural areas and have pushed them out of poverty. As a result, it will be interesting to see the impact cooperatives will have in the field of healthcare.

The authors in this work have discussed the history of healthcare cooperatives in India. After this, the authors have analysed the government schemes and legal provisions which regulate the functioning of healthcare cooperatives in this country. In the next part, the authors studied the Ayushman Sahakar scheme. The authors have discussed the features of the scheme and the impact it has generated in the field of healthcare. Lastly, the author has discussed the challenges which healthcare cooperatives face in this country and how we can overcome those challenges.

The modern day has seen an increase in the prevalence of the improvement of high-performance thermal systems for the enhancement of heat transmission. Numerous studies and research projects have been carried out to acquire an understanding of heat transport performance for their functional application to heat conveyance augmentation. The idea of this study is to inspect the entropy production in Darcy-Forchheimer Ree-Eyring nanofluid containing bioconvection flow toward a stretching surface is the topic of discussion in this paper. It is also important to take into account the influence of gravitational forces, double stratification, heat source–sink and thermal radiation. In light of the second rule of thermodynamics, a model of the generation of total entropy is presented.

Incorporating boundary layer assumptions allows one to derive the governing system of partial differential equations. The dimensional flow model is transformed into a non-dimensional representation by applying the appropriate transformations. To deal with dimensionless flow expressions, the built-in shooting method and the BVP4c code in the Matlab software are used. Graphical analysis is performed on the data to investigate the variation in velocity, temperature, concentration, motile microorganisms, Bejan number and entropy production concerning the involved parameters.

The authors have analytically assessed the impact of Darcy Forchheimer's flow of nanofluid due to a spinning disc with slip conditions and microorganisms. The modeled equations are reset into the non-dimensional form of ordinary differential equations. Which are further solved through the BVP4c approach. The results are presented in the form of tables and figures for velocity, mass, energy and motile microbe profiles. The key conclusions are: The rate of skin friction incessantly reduces with the variation of the Weissenberg number, porosity parameter and Forchheimer number. The rising values of the Prandtl number reduce the energy transmission rate while accelerating the mass transfer rate. Similarly, the effect of Nb (Brownian motion) enhances the energy and mass transfer rates. The rate of augments with the flourishing values of bioconvection Lewis and Peclet number. The factor of concentration of microorganisms is reported to have a diminishing effect on the profile. The velocity, energy and entropy generation enhance with the rising values of the Weissenberg number.

According to the findings of the study, a slip flow of Ree-Eyring nanofluid was observed in the presence of entropy production and heat sources/sinks. There are features when the implementations of Darcy–Forchheimer come into play. In addition to that, double stratification with chemical reaction characteristics is presented as a new feature. The flow was caused by the stretching sheet. It has been brought to people's attention that although there are some investigations accessible on the flow of Ree-Eyring nanofluid with double stratification, they are not presented. This research draws attention to a previously unexplored topic and demonstrates a successful attempt to construct a model with distinctive characteristics.