Search results

Gives a bibliographical review of the finite element methods (FEMs) applied for the linear and nonlinear, static and dynamic analyses of basic structural elements from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore aims to give the reader an encyclopaedic view on the subject. The bibliography at the end of the paper contains 2,025 references to papers, conference proceedings and theses/dissertations dealing with the analysis of beams, columns, rods, bars, cables, discs, blades, shafts, membranes, plates and shells that were published in 1992‐1995.

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming, powder metallurgy and composite material processing are briefly discussed. The range of applications of finite elements on these subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE researchers/users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for 1994‐1996, where 1,370 references are listed. This bibliography is an updating of the paper written by Brannberg and Mackerle which has been published in Engineering Computations, Vol. 11 No. 5, 1994, pp. 413‐55.

This paper aims to propose an innovative parametric design for artificial neural network (ANN) modeling for the multi-quality function problem to determine the optimal process scenarios.

The innovative hybrid algorithm gray relational analysis (GRA)-ANN and the GRA-Entropy are proposed to effectively solve the multi-response optimization problem.

Both the GRA-ANN and the GRA-Entropy analytical approaches find that the optimal process scenario is a stencil aperture of 57 per cent and immediate processing of the printed circuit board after exposure to a room environment.

A six-week confirmation test indicates that the optimal process has improved quad flat non-lead assembly yield from 99.12 to 99.78 per cent.

In this paper, a formula for life prediction of SMT solder joints under thermal cycling has been established on a damage model. The major failure mechanisms such as fatigue, creep and atmospheric oxidation have been considered in the formula. The experimental verification shows that the life formula established in this paper coincides with the experimental results.

The purpose of this paper is to enhance the method developed by previous researchers. In addition to using the combined interference matrix, the combined connection matrix and the combined contact matrix of product components, the disassembly sequence matrix and the combined instability matrix with platform to evaluate instability of sub‐assemblies are built, and effects of changes of sub‐assembly disassembly directions or tools and the effect of gravity are considered to obtain the best disassembly sequence for a product with many components. A computer program is generated and results of two cases are compared with those of the available studies.

The methodology includes the combined interference matrix, the combined contact matrix and the combined connection matrix of components for a product. The combined instability matrix of sub‐assemblies, changes of sub‐assembly disassembly direction or tools, and the effect of gravity during operation are considered. The binary number system is used to simplify relations among components of a product.

This methodology enhances the existing method and software is generated. Results of two cases are compared and show the same optimum disassembly processes as those obtained from other researchers.

All matrices are defined by the directions of x, y and z with three axes perpendicular to each other. The computer program generated cannot be used for a product with components that must be disassembled in the directions different from the axes.

Two cases are used to investigate feasibility of the proposed methodology with the computer program generated. The first one is an electric drill, and the second one is a flash lighter.

The methodology described in this paper is feasible for study of disassembly processes of products. The software generated can be used to obtain the optimum disassembly process of products.

This paper aims to identify how destination fascination is perceived by all participants involved in the tourism sector.

An exploratory and qualitative study was undertaken based on a literature review and three focus groups with travelers and tourism and marketing professionals.

The findings revealed that different perceptions precede a destination fascination among the three groups and that the construction of fascination is related to other variables. Through consulting the three groups, 12 variables were identified, and a framework was proposed addressing the background of destination fascination and how it relates to memorable experiences and the intention to (re)visit. Another important finding is the need for tourism professionals to collaborate with marketing professionals to meet tourists’ expectations. In addition, it was found that fascination can occur before visiting a place.

This paper advances the literature on four points: it presents evidence that fascination can occur even before visiting a destination; it verifies which variables are related to the multidimensional construct of destination fascination and how this relationship is observed by the three distinct groups; it identifies how the construction of destination fascination occurs; and it explains how tourism and marketing professionals can help fulfill travelers’ wishes.

Factores que hacen que un destino sea fascinante y motivan la (re)visita

Identificar cómo perciben la fascinación por el destino todos los participantes implicados en el sector turístico.

Se realizó un estudio exploratorio y cualitativo basado en una revisión bibliográfica y tres grupos de discusión con viajeros y profesionales del turismo y el marketing.

Los resultados revelaron que diferentes percepciones preceden a la fascinación por un destino entre los tres grupos y que la construcción de la fascinación está relacionada con otras variables. Mediante la consulta a los tres grupos, se identificaron 12 variables y se propuso un marco que aborda los antecedentes de la fascinación por el destino y su relación con las experiencias memorables y la intención de (re)visitarlo. Otra conclusión importante es la necesidad de que los profesionales del turismo colaboren con los del marketing para satisfacer las expectativas de los turistas. Además, se descubrió que la fascinación puede producirse antes de visitar un lugar.

Este artículo avanza en la literatura en cuatro puntos: (i) presenta evidencias de que la fascinación puede ocurrir incluso antes de visitar un destino, (ii) verifica qué variables están relacionadas con el constructo multidimensional de la fascinación por el destino y cómo esta relación es observada por los tres grupos distintos, (iii) identifica cómo ocurre la construcción de la fascinación por el destino, y (iv) explica cómo los profesionales del turismo y del marketing pueden ayudar a cumplir los deseos de los viajeros.

使一个目的地吸引人并促使人们（再）访问的因素

确定参与旅游部门的所有参与者是如何看待目的地魅力的。

在文献综述和与旅游者、旅游和营销专业人士的三个焦点小组的基础上, 进行了一项探索性和定性的研究。

研究结果显示, 在这三个群体中, 不同的认知会导致对目的地的迷恋, 迷恋的构建与其他变量有关。通过咨询这三个群体, 确定了12个变量, 并提出了一个框架, 解决了目的地魅力的背景, 以及它与难忘的经历和（再）访问的意图之间的关系。另一个重要的发现是, 旅游专业人士需要与营销专业人士合作, 以满足游客的期望。此外, 研究还发现, 迷恋可以在访问一个地方之前发生。

本文在四点上推动了文献的发展：(i)它提出了证据, 证明迷恋甚至在访问一个目的地之前就可以发生, (ii)它验证了哪些变量与目的地迷恋的多维构造有关, 以及这种关系是如何被三个不同的群体观察到的, (iii)它确定了目的地迷恋的构造如何发生, 以及(iv)它解释了旅游和营销专业人士如何帮助实现旅游者的愿望。

Prior research on green innovation has shown that institutional pressure stimulates enterprises to adopt green innovation. However, an institutional perspective does not explain why firms that face the same amount of institutional pressure execute different environmental practices and innovations. To address this research gap, the authors linked institutional theory with upper echelons theory and organization performance to build a comprehensive research model.

A total of 800 questionnaires were issued. The final usable questionnaires were 195, yielding a response rate of 24.38%. AMOS 23.0 was used to analyze the data and examine the relationships between the constructs in our model.

Institutional pressures affected both green innovation adoption (GIA) and the top management team's (TMT's) response. TMT's response influenced GIA. GIA was an important factor affecting firm performance. Furthermore, TMT's response mediated the relationship between institutional pressure and GIA. Institutional pressures indirectly affected green innovation performance but did not influence economic performance through GIA. Finally, TMT's response indirectly impacted firm performance through GIA.

The authors draw on institutional theory, upper echelons theory, and a performance-oriented perspective to explore the antecedents and consequences of GIA. This study has interesting implications for leaders and managers looking to implement green innovation and leverage it for firm performance to out compete with market rivals as well as to make the changes in collaboration with many other companies including market rivals to gain success in green innovation.

Grey modeling technique is an important element of grey system theory, and academic articles applied to agricultural science research have been published since 1985, proving the broad applicability and effectiveness of the technique from different aspects and providing a new means to solve agricultural science problems. The analysis of the connotation and trend of the application of grey modeling technique in agricultural science research contributes to the enrichment of grey technique and the development of agricultural science in multiple dimensions.

Based on the relevant literature selected from China National Knowledge Infrastructure, the Web of Science, SpiScholar and other databases in the past 37 years (1985–2021), this paper firstly applied the bibliometric method to quantitatively visualize and systematically analyze the trend of publication, productive author, productive institution, and highly cited literature. Then, the literature is combed by the application of different grey modeling techniques in agricultural science research, and the literature research progress is systematically analyzed.

The results show that grey model technology has broad prospects in the field of agricultural science research. Agricultural universities and research institutes are the main research forces in the application of grey model technology in agricultural science research, and have certain inheritance. The application of grey model technology in agricultural science research has wide applicability and precise practicability.

By analyzing and summarizing the application trend of grey model technology in agricultural science research, the research hotspot, research frontier and valuable research directions of grey model technology in agricultural science research can be more clearly grasped.

A unified framework for solving the bending, buckling and vibration problems of rectangular thin plates (RTPs) with four free edges (FFFF), including isotropic RTPs, orthotropic rectangular thin plates (ORTPs) and nano-rectangular plates, is established by using the symplectic superposition method (SSM).

The original fourth-order partial differential equation is first rewritten into Hamiltonian system. The class of boundary value problems of the original equation is decomposed into three subproblems, and each subproblem is given the corresponding symplectic eigenvalues and symplectic eigenvectors by using the separation variable method in Hamiltonian system. The symplectic orthogonality and completeness of symplectic eigen-vectors are proved. Then, the symplectic eigenvector expansion method is applied to solve the each subproblem. Then, the symplectic superposition solution of the boundary value problem of the original fourth-order partial differential equation is given through superposing analytical solutions of three foundation plates.

The bending, vibration and buckling problems of the rectangular nano-plate/isotropic rectangular thin plate/orthotropic rectangular thin plate with FFFF can be solved by the unified symplectic superposition solution respectively.

The symplectic superposition solution obtained is a reference solution to verify the feasibility of other methods. At the same time, it can be used for parameter analysis to deeply understand the mechanical behavior of related RTPs. The advantages of this method are as follows: (1) It provides a systematic framework for solving the boundary value problem of a class of fourth-order partial differential equations. It is expected to solve more complicated boundary value problems of partial differential equations. (2) SSM uses series expansion of symplectic eigenvectors to accurately describe the solution. Moreover, symplectic eigenvectors are orthogonal and directly reflect the orthogonal relationship of vibration modes. (3) The SSM can be carried to bending, buckling and free vibration problems of the same plate with other boundary conditions.

The purpose of this paper is to investigate and restrain the cross-coupling effect among X, Y and Z-axes of a three degrees of freedom hybrid magnetic bearing (3-DOF HMB). The influence of the cross-coupling effect on the force characteristics and stiffnesses are analysed. Two additional methods are proposed to eliminate the cross-coupling effect.

Analysis with finite element method (FEM) is time-consuming because of the requirement of a 3D model for the studied 3-DOF HMB. Hence, an improved magnetic circuit model considering the leakage, cross-coupling and saturation effects is used to investigate the cross-coupling effect in this paper. In addition, two restraining methods are proposed. One is adding an auxiliary coil between radial and axial stators. The other is adding an iron ring between the PM and radial or axial stator.

The X-axis (or Y-axis) force characteristics and stiffnesses are significantly influenced by the Z-axis current, while other axes force characteristics and stiffnesses do not show the cross-coupling effect. Moreover, this cross-coupling effect is inversely related to the distance between axial thrust disk and radial MB part. Besides, adding an auxiliary coil can effectively eliminate the cross-coupling effect in whole work range and adding an iron ring can reduce the cross-coupling effect.

The cross-coupling effect and its restraining methods of a 3-DOF HMB are investigated, which is beneficial to the design and control of such 3-DOF HMB.