Search results

1 – 10 of over 1000
Article
Publication date: 12 April 2022

Peng Xue, Jie Zheng, Yue Xu, Haiyang Bao and Rui Zhang

This study aims to analyze the transmission characteristics of a long-period grating (LPG) fabricated on plastic optical fibers (POFs) and its refractive index (RI) sensing.

Abstract

Purpose

This study aims to analyze the transmission characteristics of a long-period grating (LPG) fabricated on plastic optical fibers (POFs) and its refractive index (RI) sensing.

Design/methodology/approach

The geometric optic method is used to analyze the factors affecting the transmission characteristics of an LPG on POFs. The RI sensing performances of unbent LPGs and U-bent LPGs fabricated on POFs with different diameters are evaluated experimentally.

Findings

This study shows that the transmission loss caused by LPG strongly depends on the structural parameters of LPG and the environmental RI. For the unbent LPG, the highest RI sensitivity of 1,015%/RI unit (RIU) was obtained in the RI range of 1.33–1.45. For the U-bent LPG without cladding, the highest RI sensitivities of 1,007 and 559%/RIU are obtained in the RI ranges of 1.33–1.40 and 1.40–1.45, respectively.

Originality/value

A geometric optic method is used to analyze the transmission characteristics for an LPG on POFs, and the RI sensing of the LPGs are studied experimentally. The results show the LPG has a good RI sensing performances and is with the features of low-cost, simple structure and easy fabrication.

Article
Publication date: 11 April 2024

Fang Liu, Junbang Lan, Weichun Zhu, Yuanyuan Gong and Xue Peng

Drawing upon social comparison theory, this paper explores the (in)congruence effect of leader and follower overqualification on leader's downward envy, which in turn leads to…

Abstract

Purpose

Drawing upon social comparison theory, this paper explores the (in)congruence effect of leader and follower overqualification on leader's downward envy, which in turn leads to leader undermining behavior.

Design/methodology/approach

Using two-wave, multi-sourced data gathered in China, a polynomial regression was conducted on 301 leader-follower dyads.

Findings

Results show asymmetrical incongruence effects, indicating greater leader's downward envy when leader overqualification was lower than follower overqualification. In addition, by increasing downward envy, leader-follower (in)congruence in overqualification has an indirect positive effect on leader undermining behavior.

Practical implications

This study highlights the importance of being conscious of both parties’ overqualification levels to avoid unfavorable outcomes. Meanwhile, training for both parties is crucial, offering a holistic understanding of leader-follower overqualification differences and downward envy, as well as skills to manage “triggers” of leader undermining.

Originality/value

Our study is among the first to examine the effects of overqualification from a leader-follower dyadic congruence perspective. It suggests that leader's downward envy and undermining behaviors toward followers are influenced by both follower and leader overqualification.

Details

Leadership & Organization Development Journal, vol. 45 no. 5
Type: Research Article
ISSN: 0143-7739

Keywords

Article
Publication date: 26 June 2021

Jianxing Gu, Chen Yu, ZhenZe Yang, Peng Xue, Ning Jing and Saimei Yan

This study aims to optimize the structure of gold-sputtered U-shaped plastic fiber sensors.

Abstract

Purpose

This study aims to optimize the structure of gold-sputtered U-shaped plastic fiber sensors.

Design/methodology/approach

A group of U-shaped Au-sputtered plastic optical fiber sensing probes with polishing angles of 45°, 90° and 135° is prepared.

Findings

The experimental results show that the spectral response and sensitivity of the sensor at 45°polishing angle is twice that of the sensor at 90°.

Research limitations/implications

Due to the limitations of laboratory temperature and equipment, the overall effect has not reached the ideal, but the expected effect has been obvious. Experiments also optimize the sensor.

Practical implications

Optical fiber sensing has always been an indispensable part of various fields.

Social implications

Sensor optimization is of great help to the progress of technology and the development of science and technology.

Originality/value

The authors have no conflicts of interest to disclose.

Article
Publication date: 19 December 2017

Maogong Jiang, Guicui Fu, Bo Wan, Peng Xue, Yao Qiu and Yanruoyue Li

The purpose of this paper is to present a failure analysis of the solder layer in a Darlington power transistor in a TO-3 package.

Abstract

Purpose

The purpose of this paper is to present a failure analysis of the solder layer in a Darlington power transistor in a TO-3 package.

Design/methodology/approach

A failed Darlington power transistor in a TO-3 package was examined by different kinds of failure analysis techniques. At first, internal gas analysis was conducted to measure the atmosphere. Then, scanning acoustic microscopy (SAM) was performed to check the quality of the solder layers in the failed device, and the failure location was determined in the solder layer between chip and substrate. Next, the failed device was decapped to observe the defects. After removing the chip from the substrate, energy dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) were applied and the main elemental composition of the solder layer was identified.

Findings

Internal gas analysis indicated that the moisture and oxygen contents exceeded the allowed maximum value. Large areas of voids were found in the solder layer by SAM. The main elemental compositions of the solder layer were identified by scanning electron microscopy and EDS. Furthermore, the valences of the chemical components in the solder layer were identified by XPS. Except for the few simple substances of the initial solder material, the chemical formulae of oxidation products in the solder layer were deduced. In addition, the root causes are also discussed.

Originality/value

This paper focuses on the solder layer failure of a power transistor. Factors such as the presence of oxygen, voids and other factors, which can cause transistor damage, were comprehensively analyzed. The analysis process is worth learning from and the results can be used to improve the reliability of power devices in this kind of package.

Details

Soldering & Surface Mount Technology, vol. 30 no. 1
Type: Research Article
ISSN: 0954-0911

Keywords

Article
Publication date: 5 September 2016

Peng Yin, Can Xue and Bin Guo

The purpose of this paper is to study the influence of different carbon chain lengths in coupling agents on the water resistance and compatibility of modified long afterglow…

Abstract

Purpose

The purpose of this paper is to study the influence of different carbon chain lengths in coupling agents on the water resistance and compatibility of modified long afterglow phosphors and attempt to obtain their modification model and mechanism.

Design/methodology/approach

Three saturated-fatty-acid (caprylic, lauric, stearic acid)-based Al-Zr CAs (coupling agent) was synthesised and applied to modify the long afterglow phosphors SrMgAl4O8:Eu2+,Dy3+.

Findings

Results show that the coated amount on phosphors decreased from 13.41 to 6.53 per cent with the increased carbon chain length of fatty acid, and the better water resistant and suitability with organic resin can be obtained by lauric-based Al-Zr CA.

Originality/value

Considering that the decomposition process of modified phosphor was related with the decomposition performance of corresponding coupling agents and original phosphor, a method was first proposed to calculate the coated amount on phosphors by thermogravimetric analyser parameters.

Details

Pigment & Resin Technology, vol. 45 no. 5
Type: Research Article
ISSN: 0369-9420

Keywords

Article
Publication date: 29 June 2022

Fan Lin, Jianshe Peng, Shifeng Xue and Jie Yang

In this paper, the authors aim to propose an effective method to indirectly determine nonlinear elastic shear stress-strain constitutive relationships for nonlinear elasticity…

Abstract

Purpose

In this paper, the authors aim to propose an effective method to indirectly determine nonlinear elastic shear stress-strain constitutive relationships for nonlinear elasticity materials, and then study the nonlinear free torsional vibration of Al–1%Si shaft.

Design/methodology/approach

In this study the authors use BoxLucas1 model to fit the determined-experimentally nonlinear elastic normal stress–strain constitutive relationship curve of Al–1%Si, a typical case of isotropic nonlinear elasticity materials, and then derive its nonlinear shear stress-strain constitutive relationships based on the fitting constitutive relationships and general equations of plane-stress and plane-strain transformation. Hamilton’s principle is utilized to gain nonlinear governing equation and boundary conditions for free torsional vibration of Al–1%Si shaft. Differential quadrature method and an iterative algorithm are employed to numerically solve the gained equations of motion.

Findings

The effect of four variables, namely dimensionless fundamental vibration amplitude ϑmax, radius α and length β, and nonlinear-elasticity intensity factor δ, on frequencies and mode shapes of the shafts is obtained. Numerical results are in good agreement with reference solutions, and show that compared with linearly elastic shear stress-strain constitutive relationships of the shafts made of the nonlinear elasticity materials, its actual nonlinearly elastic shear stress-strain constitutive relationships have smaller torsion frequencies. In addition, but β having opposite hardening effect, the rest of the four variables have softening effect on nonlinearly elastic torsion frequencies. Eventually, taking into account nonlinearly elastic shear stress-strain constitutive relationships, changes of the four factors, i.e. ϑmax, α, β and δ, cause inflation and deflation behaviors of mode shapes in nonlinear free torsional vibration.

Originality/value

The study could provide a reference for indirectly determining nonlinear elastic shear stress-strain constitutive relationships for nonlinear elasticity materials and for structure design of torsional shaft made of nonlinear elasticity materials.

Details

Multidiscipline Modeling in Materials and Structures, vol. 18 no. 4
Type: Research Article
ISSN: 1573-6105

Keywords

Article
Publication date: 24 October 2023

WenFeng Qin, Yunsheng Xue, Hao Peng, Gang Li, Wang Chen, Xin Zhao, Jie Pang and Bin Zhou

The purpose of this study is to design a wearable medical device as a human care platform and to introduce the design details, key technologies and practical implementation…

Abstract

Purpose

The purpose of this study is to design a wearable medical device as a human care platform and to introduce the design details, key technologies and practical implementation methods of the system.

Design/methodology/approach

A multi-channel data acquisition scheme based on PCI-E (rapid interconnection of peripheral components) was proposed. The flexible biosensor is integrated with the flexible data acquisition card with monitoring capability, and the embedded (device that can operate independently) chip STM32F103VET6 is used to realize the simultaneous processing of multi-channel human health parameters. The human health parameters were transferred to the upper computer LabVIEW by intelligent clothing through USB or wireless Bluetooth to complete the transmission and processing of clinical data, which facilitates the analysis of medical data.

Findings

The smart clothing provides a mobile medical cloud platform for wearable medical through cloud computing, which can continuously monitor the body's wrist movement, body temperature and perspiration for 24 h. The result shows that each channel is completely accurate to the top computer display, which can meet the expected requirements, and the wearable instant care system can be applied to healthcare.

Originality/value

The smart clothing in this study is based on the monitoring and diagnosis of textiles, and the electronic communication devices can cooperate and interact to form a wearable textile system that provides medical monitoring and prevention services to individuals in the fastest and most accurate way. Each channel of the system is precisely matched to the display screen of the host computer and meets the expected requirements. As a real-time human health protection platform technology, continuous monitoring of human vital signs can complete the application of human motion detection, medical health monitoring and human–computer interaction. Ultimately, such an intelligent garment will become an integral part of our everyday clothing.

Details

International Journal of Clothing Science and Technology, vol. 36 no. 1
Type: Research Article
ISSN: 0955-6222

Keywords

Article
Publication date: 28 June 2011

Peng Xue, Song‐bai Xue, Liang Zhang, Yi‐fu Shen, Li‐li Gao, Sheng‐lin Yu, Hong Zhu, Zongjie Han and Yan Chen

The purpose of this paper is to investigate the laser soldering of fine pitch quad flat package (QFP) devices using lead‐free solders and solder joint reliability during thermal…

Abstract

Purpose

The purpose of this paper is to investigate the laser soldering of fine pitch quad flat package (QFP) devices using lead‐free solders and solder joint reliability during thermal cycling.

Design/methodology/approach

QFP devices were selected as the test vehicles and were soldered with four alloy types, Sn37Pb, Sn3.5Ag, Sn3.8Ag0.7Cu and Sn3.8Ag0.7Cu0.03Ce. The experimental samples were QFP‐256 devices with lead‐free solder paste on the printed circuit boards. The packages were dried for 24 h at 125°C prior to reflow soldering. Soldering experiments on the QFP devices were carried out with an infrared (IR) reflow soldering oven and a diode laser (DL) soldering system. Reflow soldering was performed at peak temperatures of 210°C (SnPb), 240°C (SnAgCu and SnAgCuCe) and 250°C (SnAg), as determined on the boards. Pull testing was adopted to evaluate the tensile strength of the four solders using an STR–1000 micro‐joint strength tester.

Findings

The tensile force of the QFP micro‐joints increased as laser intensity increased when it was less than an “optimal” value. The maximum tensile force of the QFP micro‐joints was gained when the laser intensity had increased to 2,165, 2,127, 2,165 and 2,064 W/cm2, depending on the alloy used. The thermal fatigue performance of three lead‐free solder joints, SnAgCuCe, SnAgCu and SnAg, was determined to be superior to that of the eutectic SnPb alloy. After soldering without thermal cycling tests, the fracture morphology of soldered joints exhibited characteristic toughness fracture with both of the soldering methods. After 700 thermal cycles, the fracture mechanism was also toughness fracture, nevertheless, the dimples became large. The fracture morphology of the soldered joints subjected to 1,500 thermal cycles indicated brittle intergranular fracture on the fracture surface and no intense plastic deformation appeared before fracture with IR soldering. For DL soldering, the pull fracture model of the SnAgCuCe was completely ductile in the soldered joint with 1,500 thermal cycles.

Originality/value

The paper usefully investigates the influence of laser intensity on the tensile strength of different soldered joints and the solder joint reliability during thermal cycling.

Details

Soldering & Surface Mount Technology, vol. 23 no. 3
Type: Research Article
ISSN: 0954-0911

Keywords

Article
Publication date: 14 September 2012

Peng Xue, Songbai Xue, Yifu Shen, Zhengxiang Xiao, Hong Zhu, Weimin Long and Xinquan Yu

The purpose of this paper is to improve the properties of Sn−9Zn solder, so as to meet the requirements of industrial applications.

Abstract

Purpose

The purpose of this paper is to improve the properties of Sn−9Zn solder, so as to meet the requirements of industrial applications.

Design/methodology/approach

The effects of Praseodymium on property and Sn whisker growth under aging treatment in Sn−9Zn lead‐free solder were investigated.

Findings

The results indicate that with the addition of rare earth Pr, the wettability and mechanical properties of Sn−9Zn solder were improved. The best wettability and comprehensive property of soldered joint is obtained when the content of Pr is 0.08 wt.%. After aging treatment at 150°C for 360 h, the mechanical properties of Sn−9Zn−0.08Pr decreased but are still obviously higher than that of Sn−9Zn. Moreover, when the content of Pr reached 0.1 wt.%, plenty of Sn−Pr compounds were found in the Sn−9Zn solder. The inevitable oxidation of Sn−Pr compounds would cause a high stress accumulated within PrSn3 phases, which would be served as driving force to induce the Sn whisker sprout and growth after aging treatment at 150°C for 120 h to 360 h. Compared with the results in Sn−9Zn−0.5Ga−0.7Pr solder that Sn whisker observed until the addition of Pr reached 0.7 wt.%, it could be inferred that the addition of Ga may react against the sprout of Sn whisker.

Originality/value

It is found that the addition of Pr can improve the properties of solder and avoid Sn whisker growth in the right range and proper conditions. The cost of the solder with added Pr is limited to RMB 2 yuan/kg so it can be widely used in industry.

Details

Soldering & Surface Mount Technology, vol. 24 no. 4
Type: Research Article
ISSN: 0954-0911

Keywords

Content available
Article
Publication date: 28 January 2014

93

Abstract

Details

Soldering & Surface Mount Technology, vol. 26 no. 1
Type: Research Article
ISSN: 0954-0911

1 – 10 of over 1000