Search results

The behavioral decision-making of digital-self is one of the important research contents of the network of crowd intelligence. The factors and mechanisms that affect decision-making have attracted the attention of many researchers. Among the factors that influence decision-making, the mind of digital-self plays an important role. Exploring the influence mechanism of digital-selfs’ mind on decision-making is helpful to understand the behaviors of the crowd intelligence network and improve the transaction efficiency in the network of CrowdIntell.

In this paper, the authors use behavioral pattern perception layer, multi-aspect perception layer and memory network enhancement layer to adaptively explore the mind of a digital-self and generate the mental representation of a digital-self from three aspects including external behavior, multi-aspect factors of the mind and memory units. The authors use the mental representations to assist behavioral decision-making.

The evaluation in real-world open data sets shows that the proposed method can model the mind and verify the influence of the mind on the behavioral decisions, and its performance is better than the universal baseline methods for modeling user interest.

In general, the authors use the behaviors of the digital-self to mine and explore its mind, which is used to assist the digital-self to make decisions and promote the transaction in the network of CrowdIntell. This work is one of the early attempts, which uses neural networks to model the mental representation of digital-self.

The purpose of this paper is to detect abnormal data of complex and sophisticated industrial equipment with sensors quickly and accurately. Due to the rapid development of the Internet of Things, more and more equipment is equipped with sensors, especially more complex and sophisticated industrial equipment is installed with a large number of sensors. A large amount of monitoring data is quickly collected to monitor the operation of the equipment. How to detect abnormal data quickly and accurately has become a challenge.

In this paper, the authors propose an approach called Multiple Group Correlation-based Anomaly Detection (MGCAD), which can detect equipment anomaly quickly and accurately. The single-point anomaly degree of equipment and the correlation of each kind of data sequence are modeled by using multi-group correlation probability model (a probability distribution model which is helpful to the anomaly detection of equipment), and the anomaly detection of equipment is realized.

The simulation data set experiments based on real data show that MGCAD has better performance than existing methods in processing multiple monitoring data sequences.

The MGCAD method can detect abnormal data quickly and accurately, promote the intelligent level of smart articles and ultimately help to project the real world into cyber space in CrowdIntell Network.

The purpose of this paper is to build cyber-physical-psychological ternary fusion crowd intelligence network and realize comprehensive, real, correct and synchronous projection in cyber–physical–psychological ternary fusion system. Since the network of crowd intelligence is the future interconnected network system that takes on the features of large scale, openness and self-organization. The Digital-selfs in the network of crowd intelligence interact and cooperate with each other to finish transactions and achieve co-evolution eventually.

To realize comprehensive, real, correct and synchronous projection between cyber–physical–psychological ternary fusion system, the authors propose the rules and methods of projection from real world to the CrowdIntell Network. They build the mental model of the Digital-self including structure model and behavior model in four aspects: identity, provision, demand and connection, thus forming a theoretical mental model framework of Digital-self.

The mental model is excepted to lay a foundation for the theory of modeling and simulation in the research of crowd science and engineering.

This paper is the first one to propose the mental model framework and projection rules and methods of Digital-selfs in network of crowd intelligence, which lays a solid foundation for the theory of modeling, simulation, intelligent transactions, evolution and stability of CrowdIntell Network system, thus promoting the development of crowd science and engineering.

This study aims to investigate the effect of V doping on the microstructure, chemical stability, mechanical and vacuum tribological behavior of sputtered MoS₂ coatings.

The MoS₂-V coatings are fabricated via tuning V target current by magnetron sputtering technique. The structural characteristic and elemental content of the coatings are measured by field emission scanning electron microscopy, X-ray diffractometer, electron probe X-ray micro-analyzer, Raman, X-ray photoelectron spectroscopy, high resolution transmission electron microscope and energy dispersive spectrometer. The hardness of the deposited coatings are tested by a nanoindentation technique. The vacuum tribological properties of MoS₂-V coatings are studied by a ball-on-disc tribometer.

Introducing V into the MoS₂ coatings results in a more compact microstructure. The hardness of the coatings increases with the doping of V. The MoS₂-V coating deposited at a current of 0.2 A obtains the lowest friction coefficient (0.043) under vacuum. As the amount of V doping increases, the wear rate of the coating decreases first and then increases, among which the coating deposited at a current of 0.5 A has the lowest wear rate of 2.2 × 10–6 mm³/N·m.

This work elucidates the role of V doping on the lubrication mechanism of MoS₂ coatings in a vacuum environment, and the MoS₂-V coating is expected to be applied as a solid lubricant in space environment.

The purpose of this study is to investigate the impact of internal control weaknesses on accounting conservatism in Chinese listed firms. It also investigates the relationship between the demand for external audit and accounting conservatism, and whether additional assurance of internal control reports (ICRs) can mitigate the negative impact of ICWs on accounting conservatism.

An empirical research approach is taken through the use of ordinary least squares (OLS) models and hand-collected internal control weakness data from ICRs released by Chinese listed firms.

The results of this paper show that the existence of ICWs has a negative effect on accounting conservatism in China. Further, the results demonstrate that both accounting-related and non-accounting-related ICWs affect accounting conservatism. The authors also find that there is a complementary relationship between accounting conservatism and the demand for additional assurance of ICRs, and additional assurance of ICRs can mitigate the negative impact of ICWs on accounting conservatism.

This study provides timely evidence to Chinese regulators of the possible economic consequences of the official implementation of internal control standard in China from 2012. The findings of this paper can also benefit regulators around the world and, in particular, the regulators in emerging markets that are considering implement regulations similar to the US SOX.

The paper demonstrates that a wider scope of ICWs, including non-accounting-related ICWs, also has a significant impact on accounting conservatism. Therefore, this research provides a more general evidence on the relationship between internal control quality and accounting conservatism.

This study delineates the effect of cover thickness on reinforced concrete (RC) columns and beams under an elevated fire scenario. Columns and beams are important load-carrying structural members of buildings. Under all circumstances, the columns and beams were set to be free from damage to avoid structural failure. Under the high-temperature scenario, the RC element may fail because of the material deterioration that occurs owing to the thermal effect. This study attempts to determine the optimum cover thickness for beams and columns under extreme loads and fire conditions.

Cover thicknesses of 30, 40, 45, 50, 60 and 70 mm for the columns and 10, 20, 25, 30, 35, 40, 50, 60 and 70 mm for the beams were adopted in this study. Both steady-state and transient-state conditions under thermomechanical analysis were performed using the finite element method to determine the heat transfer through the RC section and to determine the effect of thermal stresses.

The results show that the RC elements have a greater influence on the additional cover thickness at extreme temperatures and higher load ratios than at the service stages. The safe limits of the structural members were obtained under the combined effects of elevated temperatures and structural loads. The results also indicate that the compression members have a better thermal performance than the flexural members.

Numerical investigations concerning the high-temperature behavior of structural elements are useful. The lack of an experimental setup encourages researchers to perform numerical investigations. In this study, the finite element models were validated with existing finite element models and experimental results.

The obtained safe limit for the structural members could help to understand their resistance to fire in a real-time scenario. From the safe limit, a suitable design can be preferred while designing the structural members. This could probably save the structure from collapse.

There is a lack of both numerical and experimental research works. In numerical modeling, the research works found in the literature had difficulties in developing a numerical model that satisfactorily represents the structural members under fire, not being able to adequately understand their behavior at high temperatures. None of them considered the influence of the cover thickness under extreme fire and loading conditions. In this paper, this influence was evaluated and discussed.

In general, the existing compressor design methods require abundant knowledge and inspiration. The purpose of this study is to identify an intellectual design optimization method that enables a machine to learn how to design it.

The airfoil design process was solved using the reinforcement learning (RL) method. An intellectual method based on a modified deep deterministic policy gradient (DDPG) algorithm was implemented. The new method was applied to agents to learn the design policy under dynamic constraints. The agents explored the design space with the help of a surrogate model and airfoil parameterization.

The agents successfully learned to design the airfoils. The loss coefficients of a controlled diffusion airfoil improved by 1.25% and 3.23% in the two- and four-dimensional design spaces, respectively. The agents successfully learned to design under various constraints. Additionally, the modified DDPG method was compared with a genetic algorithm optimizer, verifying that the former was one to two orders of magnitude faster in policy searching. The NACA65 airfoil was redesigned to verify the generalization.

It is feasible to consider the compressor design as an RL problem. Trained agents can determine and record the design policy and adapt it to different initiations and dynamic constraints. More intelligence is demonstrated than when traditional optimization methods are used. This methodology represents a new, small step toward the intelligent design of compressors.

In order to investigate the vibration reduction properties of a three-dimensional elastic metastructure with spherical cavities at low frequencies.

The bandgap characteristics of a three-dimensional elastic metastructure with spherical cavities are studied based on analytical and numerical approaches.

The results of both method revealed that the vibration of the vertexes masses is important for opening bandgaps. The fact that the big sphere cavity radius or short side length of the cube unit leads to a wider bandgap, is noteworthy.

This research provides theoretical guidance for realizing the vibration attenuation application of EMs in practical engineering.

This paper aims to determine a suitable anti-wear and friction-reducing compounding additive for lithium greases (LG) by investigating the effects of three single additives potassium borate (PB), zinc dialkyl dithiophosphate and molybdenum dialkyl dithiophosphate (MoDDP) and two compound additives on the friction, wear and extreme pressure properties of LG.

The effects of the above five additives on the friction, wear and extreme pressure properties of LG were investigated using an SRV-5 friction tester. An X-ray photoelectron spectrometer was used to analyze the various elements presented on the wear surface as well as the types of compounds.

The compound additive suitable for grease consists of PB and MoDDP, which have excellent friction reduction, anti-wear and extreme pressure properties. And a boundary protection film consisting of oxide and MoS₂ is formed on the friction surface, thus improving the friction reduction and anti-wear performance of the grease.

This study can improve the anti-wear and friction-reduction performance of greases, which is of great importance in the field of industrial lubrication. The results of this paper are expected to be useful to researchers and academics of grease.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-11-2022-0350/

Allocation of complex crowdsourcing tasks, which typically include heterogeneous attributes such as value, difficulty, skill required, effort required and deadline, is still a challenging open problem. In recent years, agent-based crowdsourcing approaches focusing on recommendations or incentives have emerged to dynamically match workers with diverse characteristics to tasks to achieve high collective productivity. However, existing approaches are mostly designed based on expert knowledge grounded in well-established theoretical frameworks. They often fail to leverage on user-generated data to capture the complex interaction of crowdsourcing participants’ behaviours. This paper aims to address this challenge.

The paper proposes a policy network plus reputation network (PNRN) approach which combines supervised learning and reinforcement learning to imitate human task allocation strategies which beat artificial intelligence strategies in this large-scale empirical study. The proposed approach incorporates a policy network for the selection of task allocation strategies and a reputation network for calculating the trends of worker reputation fluctuations. Then, by iteratively applying the policy network and reputation network, a multi-round allocation strategy is proposed.

PNRN has been trained and evaluated using a large-scale real human task allocation strategy data set derived from the Agile Manager game with close to 500,000 decision records from 1,144 players in over 9,000 game sessions. Extensive experiments demonstrate the validity and efficiency of computational complex crowdsourcing task allocation strategy learned from human participants.

The paper can give a better task allocation strategy in the crowdsourcing systems.