Search results

Drawing on the cognitive–affective–conative framework, this study aims to develop a model of service robot acceptance in the hospitality sector by incorporating both cognitive evaluations and affective responses.

A mixed-method approach combining qualitative and quantitative methods was used to develop measurement and test research hypotheses.

The results show that five cognitive evaluations (i.e. cuteness, coolness, courtesy, utility and autonomy) significantly influence consumers’ positive affect, leading to customer acceptance intention. Four cognitive evaluations (cuteness, interactivity, courtesy and utility) significantly influence consumers’ negative affect, which in turn positively affects consumer acceptance intention.

This study provides significant implications for the design and implementation of service robots in the hospitality and tourism sector.

Different from traditional technology acceptance models, this study proposed a model based on the hierarchical relationships of cognition, affect and conation to enhance knowledge about human–robot interactions.

This paper is devoted to prepare micro-cone structure with variable cross-section size by Stereo Lithography Appearance (SLA)-based 3D additive manufacturing technology. It is mainly focused on analyzing the forming mechanism of equipment and factors affecting the forming quality and accuracy, investigating the influence of forming process parameters on the printing quality and optimization of the printing quality. This study is expected to provide a µ-SLA surface preparation technology and process parameters selection with low cost, high precision and short preparation period for microstructure forming.

The µ-SLA process is optimized based on the variable cross-section micro-cone structure printing. Multi-index analysis method was used to analyze the influence of process parameters. The process parameter influencing order is determined and validated with flawless micro array structure.

After the optimization analysis of the top diameter size, the bottom diameter size and the overall height, the influence order of the printing process parameters on the quality of the micro-cone forming is: exposure time (B), print layer thickness (A) and number of vibrations (C). The optimal scheme is A1B3C1, that is, the layer thickness of 5 µm, the exposure time of 3000 ms and the vibration of 64x. At this time, the cone structure with the bottom diameter of 50 µm and the cone angle of 5° could obtain a better surface structure.

This study is expected to provide a µ-SLA surface preparation technology and process parameters selection with low cost, high precision and short preparation period for microstructure forming.

As live streaming becomes a widely used online sales mode, previously content-centred anchors are attempting to switch to e-commerce live streaming. The purpose of this research was to explore the mechanisms that prompt consumers to stay or leave after content anchors transfer to live e-commerce broadcasts. In addition, we explored the factors affecting consumption from the perspectives of anchors, consumers and the external environment.

We distributed questionnaires to a group of fans who had experienced the transition of content anchors to live streaming and received back 375 valid questionnaires. Using psychological contract theory, we constructed a theoretical model for the scenario in which content anchors transition to live e-commerce broadcasting and analysed the data using partial least squares structural equation modelling (PLS-SEM).

The results show that circle culture, mainstream culture, initial trust and live streaming content all positively influenced consumers’ attitudes, whilst consumers’ past shopping experiences negatively influenced consumers’ attitudes. The personal charm of the content anchors did not have a significant effect on consumers’ attitudes. Additionally, we found that only anchors with a significant circle culture and good trust levels amongst fans were able to transition to live e-commerce streaming successfully.

This study extends the application of psychological contract theory to the field of e-commerce and describes the transformation of different types of psychological contracts. The paper’s conclusions provide a reference for decision-making and the implementation of transformation by content-based anchors to live streaming, helping them to coordinate their relationships with fans more effectively.

This study aims to better understand the morphological characteristics of single particle and the health risk characteristics of heavy metals in PM_2.5 in different functional areas of Handan City.

High resolution transmission electron microscopy was used to observe the aerosol samples collected from different functional areas of Handan City. The morphology and size distribution of the particles collected on hazy and clear days were compared. The health risk evaluation model was applied to evaluate the hazardous effects of particles on human health in different functional areas on hazy days.

The results show that the particulate matter in different functional areas is dominated by spherical particles in different weather conditions. In particular, the proportion of spherical particles exceeds 70% on the haze day, and the percentage of soot aggregates increases significantly on the clear day. The percentage of each type of particle in the teaching and living areas varied less under different weather conditions. Except for the industrial area, the size distribution of each type of particle in haze samples is larger than that on the clear day. Spherical particles contribute more to the small particle size segment. Soot aggregate and other shaped particles contribute more to the large size segment. The mass concentrations of hazardous elements (HEs) in PM_2.5 in different functional areas on consecutive haze pollution days were illustrated as industrial area > traffic area > living area > teaching area. Compared with the other functional areas, the teaching area had the lowest noncarcinogenic risk of HEs. The lifetime carcinogenic risk values of Cr and As elements in each functional area have exceeded residents’ threshold levels and are at high risk of carcinogenicity. Among the four functional areas, the industrial area has the highest carcinogenic and noncarcinogenic risks. But the effects of HEs on human health in the other functional areas should also be taken seriously and continuously controlled.

The significance of the study is to further understand the morphological characteristics of single particles and the health risks of heavy metals in different functional areas of Handan City. the authors hope to provide a reference for other coal-burning industrial cities to develop plans to improve air quality and human respiratory health.

This paper aims to study the influence of cylindrical texture parameters on the lubrication performance of static and dynamic pressure thrust bearings (hereinafter referred to as thrust bearings) and to optimize their lubrication performance using multiobjective optimization.

The influence of texture parameters on the lubrication performance of thrust bearings was studied based on the modified Reynolds equation. The objective functions are predicted through the BP neural network, and the texture parameters were optimized using the improved multiobjective ant lion algorithm (MOALA).

Compared with smooth surface, the introduction of texture can improve the lubrication properties. Under the optimization of the improved algorithm, when the texture diameter, depth, spacing and number are approximately 0.2 mm, 0.5 mm, 5 mm and 34, respectively, the loading capacity is increased by around 27.7% and the temperature is reduced by around 1.55°C.

This paper studies the effect of texture parameters on the lubrication properties of thrust bearings based on the modified Reynolds equation and performs multiobjective optimization through an improved MOALA.

This study aims to explore the consumer perceptions of cognition and intention to visit pilot zone of international medical tourism as emerging, developed medical tourism destinations.

Using a survey-based quantitative method, based on a survey of 439 tourists who have cross-border travel experience, the partial least squares approach was performed to test the hypotheses.

The results show that internal factors had a stronger influence on destination image compared to external factors. Among different factors, preferential policies had the greatest impact on intention to visit. Perceived quality had a stronger effect on intention to visit than preference. Geographical distance had a varied effect, with those furthest away in Northeast China showing greater intention to visit compared to closer regions.

This study explores the impact of multidimensional destination perception on medical tourists’ behavioural intention in emerging destinations by integrating the push-pull theory and theory of planned behaviour and tests how geographical distance affects intention to visit emerging destinations. Using China international medical tourism pilot area as a typical case of medical tourism emerging destinations for empirical analysis. This research offers guidance for branding and marketing strategies, contributes to a deeper understanding of medical tourists’ destination choices, enriches the theoretical explanation of emerging destination choice in medical tourism and provides valuable insights for destination recovery.

The purpose of this paper is to make a contribution to understanding the influence of factors such as the water/cement (W/C) ratio and the granular class on the mechanical and physical properties of high-strength concretes (HSCs). In the formulations of HSC, aggregates by their high mass and volume proportion play an important role. When selecting aggregates, it is necessary to know their intrinsic properties. These properties influence the performance of concrete, in particular the quality of the granulate cimentary adhesion.

This experimental study focused on the effect of W/C ratio (0.25, 0.30, 0.35), the effect of replacing a part of cement by silica fume (SF) (8%), the effect of fraction of aggregate on properties of fresh and hardened concrete, the effect of different environment conversation like drinking water and sea water on compressive strength and the study of absorption of water and softening using the mix design method of the University of Sherbrooke combined with the Dreux-Gorisse method which gives good results.

At the end of our work, the examination of the results obtained made it possible to establish the correlations between the formulations studied and the physicomechanical characteristics of the concrete compositions (HSC25, HSC16, HSC8). The results of this study show that the use of three granular classifications (DMAX8, DMAX16 and DMAX25) and three report W/C (0.25, 0.30 and 0.35) in two different conservation environment (drinking water and sea water) give HSCs, HSC25 with an W/C = 0.25 ratio has reached the largest mechanical strength of 90 MPa for different environments of conservation. For selecting aggregates, it is necessary to know their intrinsic properties, these properties influence the strength of concrete. In general, there is a slight decrease in the compressive resistance of the specimens stored in seawater, it can be said that the conservation life has not had effect on the resistance (28 days). The effect of aggressive environment can appear in the long term.

Mixed design and concrete fabrication with a 28-day compressive strength of up to 68 MPa or more of 90 MPa can now be possible used in Jiel (Algeria), and it should no longer be considered to be used only in an experimental domain. Addition of SF in concrete showed good development of strength between 7 and 28 days, depending on the design of the mix.

Concrete containing 8% SF with W/B of 0.25 has higher compressive strength than the other concretes, and concretes with SF are more resistant than concretes without SF, so it is possible to have concrete with a compressive strength of 82 MPa for W/C 0.25 without SF. Like as a result, we can avoid the use of SF to affect the strength of concrete at compressive strength of 68 MPa, and a slump of 21 cm, because the SF is the most expensive ingredient used in the composition of concrete and is therefore very important economically. One of the main factors of production of HSC above 90 MPa is use of aggregate DMAX25, which is stronger with W/B of 0.25 and 0.30.

This mixtures leads to a very dense microstructure and low porosity and produces increased permeability of HSC and is able to resist the penetration of aggressive agents. This combination has a positive effect on the economy of concrete.

The combination of the Dreux-Gorisse method with the Sherbrook method is very beneficial for determining the percentage of aggregates used, and the use of coarse aggregates of Jijel to obtain HSC with 90 MPa and 16 cm of workability.

The combination of mobile devices and innovative tools offers new possibilities for the development of a community of practice for design makers. Mobile learning has become an essential method that design makers should adopt. The main content of this study is to explore the characteristics of learning behaviors and learning needs of creative design makers' group in forming a community of practice in the era of mobile learning.

This study conducted questionnaire research on the potentially associated or directly associated population of design makers. The process of the study also combined observational and interview studies to compensate for the lack of questionnaire research.

Based on the support of mobile learning technology, design makers share and co-create to achieve individual development and evolution of learning organizations, and produce creative value. Design-maker communities of practice form common communities in the framework of informal organizations to support continuous individual learning. Convergent interests or concerns in making things, real-world contexts based on makerspaces and hands-on practice based on real projects are the basis for forming design-maker communities of practice. A variety of open-source hardware, software and platforms that can support mobile learning are important for the development of design-maker communities of practice. The design-maker community of practice needs group factors, activity development, physical and technical resources, spatial support and institutional norms to enhance learning behaviors and satisfy learning needs.

The discovery and construction of these associated factors can help creative design practitioners form a lasting and virtuous organizational development. This study facilitates the formation of a social network for learning and knowledge sharing among design-maker communities of practice. It enhances the innovation ability and enthusiasm of design makers according to the population characteristics and learning needs of design makers. This study also facilitates the generation of a positive adaptive maker culture and maker spirit within design maker organizations.

This study aims to propose a conceptual framework to examine the impact of risk management implementation on green innovation in the Malaysian solar photovoltaic (PV) manufacturing industry.

The study is based on primary data to be collected from 30 Malaysian solar PV manufacturing companies through a questionnaire that incorporates the five-point Likert scale. The exploratory factor analysis (EFA) is proposed to be performed using SPSS 24.0 and confirmatory factor analysis (CFA) is suggested to be conducted using AMOS.21 software to explore the factors and reliability of the items and to confirm the factorial structure of risk management implementation and green innovation. Furthermore, partial least square-structural equation modeling (PLS-SEM) is proposed to investigate relationships between constructs and latent variables.

The proposed framework is based on the stakeholder's theory and suggests that the comprehensive implementation of risk management has a significant and positive impact on green innovation in the Malaysian solar PV manufacturing industry.

This study provides insight into formulating strategies for enhancing green innovation in the solar PV manufacturing sector and serves as a valuable resource for stakeholders.

The significance of the proposed conceptual framework lies in its ability to enhance the workability of the stakeholder's theory and to create value for stakeholders through the implementation of risk management to drive green innovation. This study adds to the existing literature by exploring the relationship between risk management and green innovation in the solar PV manufacturing industry.