Search results

The purpose of the study was to develop a performance flat-plate solar collector that would be used as a solar drier for fruit fig (Ficus carica L). This study proposes how and why solar energy is important for drying the agricultural products. This study aims to expand the domain of solar collector for different purposes and, most important, for agricultural resource normally found in the literature.

The paper opted for an exploratory study using the flat-plate solar collector with drying chamber for drying purposes of agricultural products. During the experiment, the data were collected with moisture content, drying rate of the product and solar irradiation falls on the collector.

This paper describes that how flat-plate collector works for agricultural products and how to reduce the moisture content in the product (fig). Efficiency of collector was evaluated under the ambient temperatures of 24°C. Efficiency also significantly increased from 53 to 55 per cent with an increase in ambient temperature from 22 to 24 °C. Figs (Ficus carica L) were dried in the drying chamber of the flat-plate solar collector. The products were dried at temperature of 55-65°C and 15 to 20 per cent humidity.

Because of this research chosen, the research results are beneficiary for agricultural users for drying purposes. Therefore, the researchers are encouraged to dry the agricultural product with flat-plate solar collector, because it reduced the moisture content of the product very fast.

This paper fulfills an identified need to study that how flat-plat solar collector can be used.

Nitrogen oxides (NO_x) have been considered as primarily responsible for many serious environmental problems. Removing NO is the key task to remove NO_x hazards. To clarify, NO removal process for pitch-based spherical-activated carbons (PSACs), an online prediction and optimization technique in real-time based on support vector machine algorithm in regression (support vector regression [SVR]) is discussed. The purpose of this paper is to develop a predictor and optimizer system on selective catalytic reduction of NO (SCRN) using experimental data and data-driven SVR intelligence methods.

Predictor and optimizer using developed SVR have been proposed. To modify the training efficiency of SVR, the authors especially customize batch normalization and k-fold cross-validation techniques according to the unique characteristics of PSACs model.

The results present that SVR provides a property regression model since it can linkage linear and non-linear process and property relationships in few experimental data sets. Also, the integrated normalization and k-fold cross-validation show a satisfying improvement and results for SVR optimization. The predicted results of predictor and optimizer in single and double factor systems are in excellent agreement with the experimental data.

SCRN-PO for predicting and optimization SCRN problems is developed by data-driven methods. The outperformed SCRN-PO system is used to predict multiple-factors property parameters and obtain optimum technological parameters in real-time. Also, experiment duration is greatly shortened.

The purpose of this paper is to study the electrochemical properties of electrode material on activated carbon double layer capacitors. It also tries to develop a prediction model to evaluate pore size value.

Back-propagation neural network (BPNN) prediction model is used to evaluate pore size value. Also, an improved heuristic approach genetic algorithm (HAGA) is used to search for the optimal relationship between process parameters and electrochemical properties.

A three-layer ANN is found to be optimum with the architecture of three and six neurons in the first and second hidden layer and one neuron in output layer. The simulation results show that the optimized design model based on HAGA can get the suitable process parameters.

HAGA BPNN is proved to be a practical and efficient way for acquiring information and providing optimal parameters about the activated carbon double layer capacitor electrode material.

The purpose of this study is to provide some references about applying the semi-active particle damper to enhance the stability of the pipe structure.

This paper establishes the dynamical models of semi-active particle damper based on traditional dynamical theory and fractional-order theory, respectively. The semi-active particle damping vibration isolation system applied in a pipe structure is proposed, and its analytical solution compared with G-L numerical solution is solved by the averaging method. The quantitative relationships of fractional-order parameters (a and kp) are confirmed and their influences on the amplitude-frequency response of the vibration isolation system are analyzed. A fixed point can be obtained from the amplitude-frequency response curve, and the optimal parameter used for improving the vibration reduction effect of semi-active particle damper can be calculated based on this point. The nonlinear phenomenon caused by nonlinear oscillators is also investigated.

The results show that the nonlinear stiffness parameter p will cause the jump phenomenon while p is close to 87; with the variation of nonlinear damping parameter μ, the pitchfork bifurcation phenomenon will occur with an unstable branch after the transient response; with the change of fractional-order coefficient k_p, a segmented bifurcation phenomenon will happen, where an interval that k_p between 18.5 and 21.5 has no bifurcation phenomenon.

This study establishes a mathematical model of the typical semi-active particle damping vibration isolation system according to fractional-order theory and researches its nonlinear characteristics.

The purpose of this paper is to propose a robust optimization approach for the short‐term scheduling of batch plants under demand uncertainty where the uncertain parameters can be described by a normal distribution function.

The robust optimization formulation introduces a small number of auxiliary variables and additional constraints into the original mixed integer linear programming problem, generating a deterministic robust counterpart problem which provides the optimal solution given the magnitude of the uncertain data, a feasibility tolerance, and a reliability level.

Developed robust optimization approaches produce robust solutions for uncertainties in both the coefficients and right‐hand‐side parameters of the linear inequality constraints and can be applied to address the problem of production scheduling with uncertain parameters.

The choice of the magnitude of the uncertain data, a feasibility tolerance, and a reliability level are the main limitation of the model.

Very useful advice for short‐term scheduling of batch plants under demand uncertainty.

The paper proposes a robust optimization approach for short‐term scheduling of batch plants under demand uncertainty. Computational results are presented to demonstrate the effectiveness of the proposed approach.

This research takes the transfer behavior of users from Tencent QQ to WeChat as an example to discuss the wider transfer behavior of social media users on the Internet.

This paper collects data through a combination of offline interviews and online questionnaire surveys, and utilizes data analysis tools to construct structural equation modeling (SEM). Using Statistical Product and Service Solutions (SPSS) Statistics 22.0 and Analysis of Moment Structures (AMOS) 22.0 software with SEM, this study was carried out to provide reasonable statistical support for relevant proposed hypotheses based on 368 effective samples acquired through the questionnaire.

The findings of this study show that subjective norm, transfer experience, social communication, and knowledge acquisition all have significant associations with transfer intention and switching behavior. To be specific, transfer intention exerts a positive association on switching behavior; function setting, privacy protection and personal innovation have a favorable association with transfer intention; transfer cost has a significantly negative relationship with transfer intention and switching behavior; function setting has no important relationship on switching behavior.

The research results provide a reference for improving the viscosity and loyalty of social media users in the new era and resolving the problem of user churn.

The purpose of this paper is to set up a two‐stage stochastic integer‐programming model (TSM) for the multiperiod scheduling of multiproduct batch plants under demand uncertainty involving the constraints of material balances and inventory constraints, as well as the penalty for production shortfalls and excess.

Scheduling model is formulated as a discrete‐time State Task Network. Given a scheduling horizon consisting of several time‐periods in which product demands are placed, the objective is to select a schedule that maximizes the expected profit for a single and multiple product with a given probability level. The stochastic elements of the model are expressed with equivalent deterministic optimization models.

The TSM model not only allows for uncertain product demand correlations, but also gives different processing modes by a range of batch sizes and a task‐dependent processing time. The experimental results show that the TSM model is more appropriate than another model for multiperiod scheduling of multiproduct batch plants under correlated uncertain demand.

The choice of penalty parameter of demand uncertainty is the main limitation.

The paper provides very useful advice for multiperiod scheduling of multiproduct batch plants under demand uncertainty.

A stochastic model for the multiperiod scheduling of multiproduct batch plants under demand uncertainty was set up. A test problem involving 12 correlated uncertain product demands and two alternative models verified the availability of the TSM.

On one side, the purpose of this paper is to numerically analyze the emergency order allocation mechanism and help managers to understand the relationship between the emergency coefficient, uncertainty and emergency cost in two‐echelon logistics service supply chain. On the other side, the purpose of this paper is to help managers understand how to deal with the problem of order allocation in the two‐echelon logistics service supply chain better in the case of emergency.

The paper presents a multi‐objective planning model for emergency order allocation and then uses numerical methods with LINGO 8.0 software to identify the model's properties. The application of the order allocation model is then presented by means of a case study.

With the augment of uncertainty, the general cost of logistics service integrator (LSI) is increasing, while the total satisfaction of all functional logistics service providers (FLSPs) is decreasing, as well as the capacity reliability; at the same time the emergency cost coefficient is closely correlative with the satisfaction and general penalty intensity of FLSPs; finally, the larger the emergency cost coefficient is, the more satisfaction of FLSPs, but the capacity reliability goes up first and down later.

Management should note that it is not better when emergency cost coefficient is bigger. The general satisfaction degree of FLSP increases with the augment of emergency cost coefficient, but there is an upper limit of the value, i.e. it will not increase indefinitely with the augment of emergency cost coefficient. This paper also has some limitations. The optional emergency cost coefficient only adopted a group of data to analyze while the trend of the reliability of logistics capacity needs to be further discussed. In addition, the algorithm of emergency order allocation model in the case of multi‐objective remains to be solved.

Under emergency conditions, LSIs can adopt this kind of model to manage their FLSPs to obtain the higher logistics performance. But LSIs should be careful selecting emergency cost coefficient. In accordance with different degrees of emergency logistics demand, LSIs can determine reasonable emergency cost coefficient, but not the bigger, the better, on the premise that LSIs acquire maximum capacity guarantee degree and overall satisfaction degree of FLSPs. FLSPs can make contract bargaining of reasonable emergency coefficient with LSIs to make both sides get the best returns and realize the benefit balance.

Many studies have emphasized the capacity allocation of manufactures, order allocation of manufacturing supply chain and scheduling model of emergency resources without monographic study of supply chain order allocation of logistics service. Because the satisfaction degree of FLSPs the cost of integrators needs to be considered in the process of order allocation, and the inventory cost of capacity does not exist, it is different from the issue of capacity allocation planning of manufacture supply chain. Meanwhile, the match of different kinds of logistics service capacity must be considered for the reason of the integrated feature of logistics service. Additionally, cost is not the most important decision objective because of the characteristics of demand uncertainty and weak economy. Accordingly, this paper considers these issues.

For nanostores, striving to become the community group-buying leader is gaining prominence. This paper aims to construct Hotelling linear models to investigate whether nanostores should be registered as leaders and their decisions in a competitive environment.

This paper constructs three Hotelling linear models: neither nanostore registers as community leader, only one nanostore registers as community leader and both nanostores register as community leader. The competitive operation strategies of two general nanostores under three scenarios are solved.

The study finds that nanostores without a cost advantage may benefit from being the first leader. The nanostore's preferred decisions depend on the investment cost parameters of its own and competitors which may lead to market share competition. Furthermore, consumers' sensitivity to community group-buying service has a negative effect on nanostores' profit.

The study is one of the few to consider the competition between community leaders. Besides, the study considers that the utilities functions of consumers are concurrently impacted by the service decisions, along with the price in different nanostores. It can provide nanostores useful implications in the dynamic industry.

This paper presents a mixed-integer programming model for a single machine earliness/tardiness scheduling problem where the objective is to minimize total earliness/tardiness duration when the uncertainty of parameters such as processing times and due date is coded with grey numbers.

Grey theory and grey numbers are used for illustrating the uncertainty of parameters in processing times and common due date, where the objective is to minimize the total earliness/tardiness duration. The paper proposes a 0–1 mathematical model for the problem and an effective heuristic method for the problem by using expected processing times for ordering jobs.

The uncertainty of the processing times and common due date are encoded with grey numbers and a position-dependent mixed-integer mathematical programming model is proposed for the problem in order to minimize total grey earliness/tardiness duration of jobs having grey processing times and a common due date. By using expected processing times for ranking grey processing times, V-shaped property of the problem and an efficient heuristic method for the problem are proposed. Solutions obtained from the heuristic method show that the heuristic is effective. The experimental study also reveals that while differences between upper and lower bounds of grey processing times decrease, the proposed heuristic's performance decreases.

The grey theory and grey numbers have been rarely used as machine scheduling problems. Therefore, this study provides an important contribution to the literature.