Search results

The purpose of this paper is to provide a knowledge-enabled digital twin for smart design (KDT-SD) of aircraft assembly line (AAL) to enhance the AAL efficiency, performance and visibility. Modern AALs usually need to have capabilities such as digital-physical interaction and self-evaluation that brings significant challenges to traditional design method for AAL. The digital twin (DT) combining with reusable knowledge, as the key technologies in this framework, is introduced to promote the design process by configuring, understanding and evaluating design scheme.

The proposed KDT-SD framework is designed with the introduction of DT and knowledge. First, dynamic design knowledge library (DDK-Lib) is established which could support the various activities of DT in the entire design process. Then, the knowledge-driven digital AAL modeling method is proposed. At last, knowledge-based smart evaluation is used to understand and identify the design flaws, which could further improvement of the design scheme.

By means of the KDT-SD framework proposed, it is possible to apply DT to reduce the complexity and discover design flaws in AAL design. Moreover, the knowledge equips DT with the capacities of rapid modeling and smart evaluation that improve design efficiency and quality.

The proposed KDT-SD framework can provide efficient design of AAL and evaluate the design performance in advance so that the feasibility of design scheme can be improved as much as possible.

Assembly sequence planning (ASP) is a crucial job during assembly process design. However, it is still difficult to reuse the existing solution to solve a new ASP problem. In particular, with the rapid development of digital technologies, the reusable assembly information of an existing solution is not concentrated in one multimedia but dispersed in multiple heterogeneous multimedia, e.g. text, three-dimensional graphics, even images and videos. This paper aims to propose a multimedia case (MC)-based reasoning framework to solve ASP by reusing the existing solution whose assembly information is dispersed in multimedia.

The proposed framework is designed with the introduction of the MC. An MC seamlessly integrates the dispersed assembly information of an existing solution. Under the proposed concept and architecture, the assembly information of an existing solution is extracted to build assembly descriptors of multimedia. Therefore, the MC is captured by organizing the assembly descriptors of corresponding multimedia.

By means of the framework proposed, it is possible to reuse the existing solution whose assembly information is dispersed in multimedia to solve ASP. Moreover, the extraction method of assembly information can flexibly parse most of the multimedia. Finally, the MC has the capability to represent the existing solution by collecting dispersed assembly information.

The proposed framework can discover the similar existing solution and avoid the potential failures confronted in the past so that the feasibility of ASP result can be improved as much as possible.

As a high-performance engineering plastic, polyimide (PI) is widely used in the aerospace, electronics and automotive industries. This paper aims to review the latest progress in the tribological properties of PI-based composites, especially the effects of nanofiller selection, composite structure design and material modification on the tribological and mechanical properties of PI-matrix composites.

The preparation technology of PI and its composites is introduced and the effects of carbon nanotubes (CNTs), carbon fibers (CFs), graphene and its derivatives on the mechanical and tribological properties of PI-based composites are discussed. The effects of different nanofillers on tensile strength, tensile modulus, coefficient of friction and wear rate of PI-based composites are compared.

CNTs can serve as the strengthening and lubricating phase of PI, whereas CFs can significantly enhance the mechanical properties of the matrix. Two-dimensional graphene and its derivatives have a high modulus of elasticity and self-lubricating properties, making them ideal nanofillers to improve the lubrication performance of PI. In addition, copolymerization can improve the fracture toughness and impact resistance of PI, thereby enhancing its mechanical properties.

The mechanical and tribological properties of PI matrix composites vary depending on the nanofiller. Compared with nanofibers and nanoparticles, layered reinforcements can better improve the friction properties of PI composites. The synergistic effect of different composite fillers will become an important research system in the field of tribology in the future.

The purpose of this study is to investigate the influence mechanism of different interface component surface textures on the ultrasonic motor (USM) output performance.

The energy transmission mechanism of the traveling-wave ultrasonic motor 60 (TRUM-60) was numerically and experimentally investigated by fabricating dimple textures with different feature types on the friction material and the stator.

Textured friction material can increase the contact range effectively, and thus, can improve the friction characteristics of the interface and the output performance of the TRUM-60. The experimental results verified the expected influence mechanism and demonstrated that the use of either a textured friction material or stator has a very different effect on USM output performance. A textured PI-based friction material improved the TRUM-60 output performance, resulting in a maximum energy conversion efficiency of 57.11%. However, a textured stator degraded the TRUM-60 output performance, resulting in a minimum energy conversion efficiency of only 44.92%.

The results of this study provide a theoretical foundation for improved USM designs with textured interfaces.

What is the relation between the land system with Chinese characteristics and the country's high-speed economic growth in the past decades? There is a lack of rigorous academic research based on the general equilibrium theory of macroeconomics on this issue.

By building a multisector dynamic general equilibrium framework with land system, this paper explores how the land supply mode with Chinese characteristics affects China's economic growth as well as its transmission mechanism.

This paper confirms the importance of land system with Chinese characteristics in explaining the mystery of China's high-speed economic growth. Counterfactual analysis shows that if China adopts a land system similar to that of other developing countries, GDP will drop 36% from the current level under the baseline model.

As the industrial sector shrinks relatively and the output elasticity of infrastructure decreases, this inhibitory effect will become more apparent. China should improve its land supply mode, especially expand the supply of commercial and residential land and reduce the cost of land in the service sector. This can promote better economic development in the future and thus improve household welfare and the structure of aggregate demand, replace “land-based public finance” and thus inhibit the “high leverage” risks of local governments.

This study aims to improve disaster management. Social media, particularly microblog, has become a new platform for public opinion dissemination. However, few studies have been conducted to explore the structure of public opinions, the approaches for facilitating the spread of public opinions and the results of public opinion dissemination in the context of mobile internet for the purpose of improving disaster management.

This paper chooses Ebola as the research topic and extracts 14,735 Ebola-related data items from Sina Microblogs to examine the information nodes of public opinion and the characteristics of propagation paths on mobile internet. Particularly, nodes of public opinion between mobile terminals and non-mobile terminals are compared.

The results of this paper reveal the characteristics of public opinion propagation on mobile internet and verify the effectiveness of public opinion propagation on mobile internet. This study shows that public opinions propagate quickly, widely and efficiently and further generate great impacts on mobile internet.

The methods used in this study can be useful for the government agencies and other relevant organizations to monitor public opinions, identify issues and problems proactively and develop strategies in a more efficient manner to improve disaster management.

The results of this paper are helpful for related departments to monitor public opinions and to further improve disaster management.

This paper explores the mechanism of public opinion dissemination on mobile internet and further investigates how to improve disaster management through a case study related to Ebola.