Search results

The purpose of this paper is to provide a knowledge-enabled digital twin for smart design (KDT-SD) of aircraft assembly line (AAL) to enhance the AAL efficiency, performance and visibility. Modern AALs usually need to have capabilities such as digital-physical interaction and self-evaluation that brings significant challenges to traditional design method for AAL. The digital twin (DT) combining with reusable knowledge, as the key technologies in this framework, is introduced to promote the design process by configuring, understanding and evaluating design scheme.

The proposed KDT-SD framework is designed with the introduction of DT and knowledge. First, dynamic design knowledge library (DDK-Lib) is established which could support the various activities of DT in the entire design process. Then, the knowledge-driven digital AAL modeling method is proposed. At last, knowledge-based smart evaluation is used to understand and identify the design flaws, which could further improvement of the design scheme.

By means of the KDT-SD framework proposed, it is possible to apply DT to reduce the complexity and discover design flaws in AAL design. Moreover, the knowledge equips DT with the capacities of rapid modeling and smart evaluation that improve design efficiency and quality.

The proposed KDT-SD framework can provide efficient design of AAL and evaluate the design performance in advance so that the feasibility of design scheme can be improved as much as possible.

This study investigates the relationship between buyers’ psychological antecedent and repurchase intentions in online group buying. Considering and evaluating pre-purchase, the authors measure the buyers’ overall experience of online group buying through their perceived value (PV) and risk. This study examines the influence of PV and perceived risk (PR) on positive electronic word-of-mouth (eWoM) communication and repurchase intention in online group buying.

The authors verify the research model using SPSS and the structural equation modeling-partial least square (SEM-PLS) to analyze 839 convincing respondents. This quantitative research provides insights into online group buying, including the food industry.

The results demonstrate that the buyers’ PV of online group buying enhanced positive eWoM communication and repurchase intention. The willingness of buyers to spread positive eWoM indicates their recognition and satisfaction with a product or brand. Thus, they have the behavioral intention to repurchase in online group buying. The study found that while positive eWoM communication significantly impacts repurchase intention, PR negatively affects PV. The research provides theoretical and practical implications at the end of the study.

This study has some limitations. First, the study only used PV and PR to measure consumers’ considerations and evaluations of the initial stage in the consumer decision journey. Future studies can include more dimensions that may further affect these considerations and assessments to verify the research model. Second, the study only used positive eWoM communication to measure the “enjoy-advocate-bond” of consumption and usage in the post-purchase stage.

The study proposes the sequential relationship in the psychological decision procedure of participating in online group buying and provides valuable managerial implications for managers operating online group buying on third-party platforms. The findings provide good knowledge for the food industry to stay connected with customers and develop their satisfaction.

Leisure and tourism activities have proliferated and become important parts of modern life, and the hotel industry plays a necessary role in the supply for and demand from consumers. The purpose of this paper is to develop guidelines for hotel service development by applying a service development approach integrating Kansei engineering and text mining.

The online reviews represent the voice of customers regarding the products and services. Consumers’ online comments might become a key factor for consumers choosing hotels when planning their tourism itinerary. With the framework of Kansei engineering, this paper adopts text mining to extract the sets of Kansei words and hotel service characteristics from the online contents as well as the relationships among Kansei words, service characteristics and these two sets. The relationships are generated by using link analysis, and then the guidelines for hotel service development are proposed based on the obtained relationships.

The results of the present research can provide the hotel industry a comprehensive understanding of hotels’ customers opinions, and can offer specific advice on how to differentiate one’s products and services from competitors’ in order to improve customer satisfaction and increase hotels’ performance in the end. Finally, this study finds out the service development guidelines to meet customers’ requirements which can provide suggestions for hotel managers. The implications both for academic and industry are also drawn based on the obtained results.

Now, in the internet era, consumers can comment on their hotel living experience directly through the internet. The large amount of user-generated content (UGC) provided by consumers also provides chances for the hospitality industry to understand consumers’ opinions through online review mining. The UGC with consumers’ opinions to hotel services can be continuously collected and analyzed by hoteliers. Therefore, this paper demonstrates how to apply the hybrid approach integrating Kansei engineering and online review mining to hotel service development.

The study performs an empirical test to assess the impact of the Pakistan-China Free trade agreement (FTA) on Pakistan, China, and the World's exports under homogenous and differentiated products. This study employs the modeling with Poisson specification with Poisson Pseudo-Maximum Likelihood method for the estimations. The results of empirical test show that the effect of FTA on the FTA and Non-FTA countries is greater in the differentiated product as compared to the homogenous product. Therefore, one of the most important policy implications provided by this study is that export enterprises need to concentrate on differentiated products as compare to the homogenous products after the implementation of the Pakistan-China FTA. Moreover, the previous literature concluded that Pakistan-China FTA was more beneficial for China as compared to Pakistan. However, according to this study, if Pakistani enterprises focus more on differentiated products as compared to homogenous products, then it will be equally beneficial for both Chinese and Pakistani enterprises. This study will contribute to the literature by considering the Bertrand competition between asymmetric countries and find out the effect of the FTA on these three countries. It considers China, Pakistan, and the Rest of the World as first, second, and third countries.

The purpose of this paper is to propose a novel combined finite-discrete element method (FDEM), based on the cohesive zone model, for simulating rockslide problems at the laboratory scale.

The combined FDEM is realized using ABAQUS/Explicit. The rock mass is represented as a collection of elastic bulk elements glued by cohesive elements with zero thickness. To reproduce the tensile and shear micro-fractures in rock material, the Mohr-Coulomb model with tension cut-off is employed as the damage initiation criterion of cohesive elements. Three simulated laboratory tests are considered to verify the capability of combined FDEM in reproducing the mechanical behavior of rock masses. Three slope models with different joint inclinations are taken to illustrate the application of the combined FDEM to rockslide simulation.

The results show that the joint inclination is an important factor for inducing the progressive failure behavior. With a low joint inclination, the slope failure process is observed to be a collapse mode. As the joint inclination becomes higher, the failure mode changes to sliding and the steady time of rock blocks is shortened. Moreover, the runout distance and post-failure slope angle decrease as the joint inclination increases.

These studies indicate that the combined FDEM performed within ABAQUS can simulate slope stability problems for research purposes and is useful for studying the slope failure mechanism comprehensively.

The purpose of this study is to delineate the factors influencing the use of financial derivatives by non-financial firms in managing their exchange rate exposure. In total, 219 non-financial firms are surveyed in regard to their financial hedging decision.

This study is conducted via a survey and the questionnaires were sent to the treasurers and financial controller of the firms. Descriptive analysis is employed to assess the profiles of the respondents. Then, factor analysis is carried out to determine the factors influencing the use of financial derivatives in Malaysia.

The results indicate that the hedging decision of non-financial firms is influenced by their assertive level toward the market and regulators and also how flexible they are for derivative instruments. The intellectual capability that firms acquire to perform hedging strategies is also vital in influencing them to make hedging decision.

The insights of this survey would assist and prepare firms to hedge their exchange rate risk by employing financial derivatives. Knowing the influences of firms' adoption of currency derivatives would allow policy makers to formulate their policies in boosting the liquidity of Malaysian derivative market.

This study presents findings on the factors influencing the execution of financial hedging by non-financial firms in Malaysia. Survey data are used to seek for the feedback from the market players in order to provide empirical evidence on the corporate use of financial hedging.

The purpose of this paper is to discretely model rockfill materials considering the irregular shape of the particles and their crushability. The scientific goal was to investigate the influence of particle crushability and shape on the mechanical behavior of rockfill materials.

The method of generating irregular-shaped particles was based on the observation that most rockfill grains can be approximately circumscribed by an ellipsoid. Two shape descriptors were used to make the virtual particles closely replicate the geometric features of natural rockfill grains. The combined finite-discrete element method (FDEM) was used to numerically simulate a drained, tri-axial compression test. The particle assemblies were subjected to tri-axial compression under strain controlled conditions while a constant confining pressure was maintained.

The non-breakable particles showed a remarkable ability to dilate as a result of a higher inter-particle locking effect. Dilation forces the particles to move from a lower potential energy state to a higher potential energy state, which causes the micro-structure to become less stable, resulting in a dramatic decline in the angle of friction from the peak state to the residual state. In addition, the elongated particles enhance the interlocking effect, but breakage is also more likely to occur. The net effect of those two mechanisms controls the overall shearing resistance of rockfill materials.

After calibration using a few micro-parameters, the combined FDEM was able to reproduce the typical behavior of rockfill materials without requiring a description of the complex relationship that exists between constituents; this relationship must be described in continuum mechanics. The simulation results showed that this approach is predictive. The combined FDEM also provides an opportunity for a quantitative study of the micro-structure of granular materials, and this study will help us to better understand the mechanical characteristics of rockfill materials.

This paper provides a comprehensive assessment of the influencing factors on knowledge transfer through meta-analysis with an emphasis on the influence of cultural contexts.

The approach involved the evaluation and analysis of 69 published empirical studies and the categorization of these studies into two groups based on different cultural contexts as described by Hofstede. A meta-analytic approach was then employed to provide a comparative analysis of the categorized studies.

The results of the meta-analysis of the influencing factors of knowledge transfer are consistent with the results obtained in most previous studies, indicating a maturation of research in this area. Influencing factors such as knowledge ambiguity, tie strength, trust, and common cognition are shown to impact knowledge transfer in different cultural contexts, particularly with regard to the individualism-low power distance and collectivism-high power distance dimensions defined by Hofstede.

This analysis was limited to the correlation between the influencing factors and the general performance in knowledge transfer and did not specifically address more detailed dimensions such as efficiency and effectiveness. In addition, this analysis was restricted to the cultural contexts of only two cultural dimensions. However, the review of this broad range of studies provided sufficient data to allow an in-depth analysis of related influencing factors and helped to illustrate and exemplify the influencing mechanisms of culture on knowledge transfer.

The results presented in this paper can help managers working in cross-cultural environments to understand the key influencing factors that affect knowledge transfer in the workplace. By understanding these factors, managers can more effectively implement methods and procedures that improve cross-cultural knowledge transfer in the work environment.

This paper provides a detailed insight into the influencing factors found between two distinctive cultural contexts and offers a fresh analysis of influencing factors with regard to knowledge transfer in a cross-cultural environment.

In the process of undertaking overseas construction projects, relational governance has become indispensable for project stakeholders. This study examines how relational governance influences contractors' adaptability to foreign situations and whether such associations are positively moderated by international environmental complexity.

A crosssectional survey methodology was applied to collect primary data through questionnaires sent to domestic contractors in China and South Korea (hereafter Korea). Multiple regression analysis was used to test the effects of four dimensions of relational governance on contractor adaptability. Thereafter, the Chinese and Korean subsamples were tested separately through moderated regression analysis to explore differences in the influence of relational governance on adaptability.

The results showed that quality communication, favor exchange and establishing an emotional relationship significantly and positively affected a contractor’s adaptability. However, there were significant differences between the Chinese and Korean international contractors in terms of the moderating effects of international environment complexity.

East Asian engagement in international development is not limited to China and Korea alone, and the study should be replicated using large representative samples from more countries, such as Japan, to gain a fuller understanding of the influence of relational governance.

The results have great significance for the managers of international contractors in East Asian countries and contribute to the research on relational governance and contractor adaptability.