Search results

The purpose of this work was to study the effect of different wood surface preparations on the wetting and adhesion of coating.

In this research, six different chemical preparations to evaluate the photostability and properties of wood coating. Also, the effect of the same wood treatments on the properties of the coating, i.e. wetting, adhesion and the permeability of two types of coatings, was investigated.

As a result, benzoyl chloride and chromic acid were found to be the most effective photostabilizing preparations. Solvent-based polyurethane was more compatible with the prepared wood surfaces compared with water-based alkyd coatings.

Chemical modifications of wood surfaces affected the wetting of various coatings.

Various surface properties could be changed using preparation that affects important coating properties.

Unfortunately, the properties of transparent wood coatings used outdoors disappear through the early years of use, essentially due to the wood substrate’s photodegradation.

Wood is a widespread substrate because of its comfortable handling, availability, proper cost of preparation and its good mechanical strength because of its density. Architects and designers tend to use wood in the construction of green buildings. However, this material is disposed to weathering while using outdoors and it should be solved.

This study aims to present a state-of-the-art review of building information modelling (BIM) in the Swedish construction practice with a focus on wood construction. It focuses on examining the extent, maturity and actual practices of BIM in the Swedish wood construction industry, by analysing practitioners’ perspectives on the current state of BIM and its perceived benefits.

A qualitative approach was selected, given the study’s exploratory character. Initially, an extensive review was undertaken to examine the current state of BIM utilisation and its associated advantages within the construction industry. Subsequently, empirical data were acquired through semi-structured interviews featuring open-ended questions, aimed at comprehensively assessing the prevailing extent of BIM integration within the Swedish wood construction sector.

The research concluded that the wood construction industry in Sweden is shifting towards BIM on different levels, where in some cases, the level of implementation is still modest. It should be emphasised that the wood construction industry in Sweden is not realising the full potential of BIM. The industry is still using a combination of BIM and traditional methods, thus, limiting the benefits that full BIM implementation could offer the industry.

This study provided empirical evidence on the current perceptions and state of practice of the Swedish wood construction industry regarding BIM maturity.

In fire condition, the time to failure of a timber connection is mainly reliant on the wood charring rate, the strength of the residual wood section, and the limiting temperature of the steel connectors involved in the connection. The purpose of this study is to experimentally investigate the effects of loaded bolt end distance, number of bolt rows, and the existence of perpendicular-to-wood grain reinforcement on the structural fire behavior of semi-rigid glued-laminated timber (glulam) beam-to-column connections that used steel bolts and concealed steel plate connectors.

In total, 16 beam-to-column connections, which were fabricated in wood-steel-wood bolted connection configurations, in eight large-scale sub-frame test assemblies were exposed to elevated temperatures that followed CAN/ULC-S101 standard time-temperature curve, while being subjected to monotonic loading. The beam-to-column connections of four of the eight test assemblies were reinforced perpendicular to the wood grain using self-tapping screws (STS). Fire tests were terminated upon achieving the failure criterion, which predominantly was dependent on the connection’s maximum allowed rotation.

Experimental results revealed that increasing the number of bolt rows from two to three, each of two bolts, increased the connection’s time to failure by a greater time increment than that achieved by increasing the bolt end distance from four- to five-times the bolt diameter. Also, the use of STS reinforcement increased the connection’s time to failure by greater time increments than those achieved by increasing the number of bolt rows or the bolt end distance.

The invaluable experimental data obtained from this study can be effectively used to provide insight and better understanding on how mass-timber glulam bolted connections can behave in fire condition. This can also help in further improving the existing design guidelines for mass-timber structures. Currently, beam-to-column wood connections are designed mainly as axially loaded connections with no guidelines available for determining the fire resistance of timber connections exerting any degree of moment-resisting capability.

In 2020, an outbreak of Salmonella Stanley linked to imported dried wood ear mushrooms affected 55 individuals in the United States of America. These mushrooms, commonly used in Asian cuisine, require processing, like rehydration and cutting, before serving. The US Centres for Disease Control and Prevention advise food preparers to use boiling water for rehydration to inactivate vegetative bacterial pathogens. Little is known about how food handlers prepare this ethnic ingredient and which handling procedures could enable Salmonella proliferation.

This study used content analysis to investigate handling practices for dried wood ear mushrooms as demonstrated in YouTube recipe videos and to identify food safety implications during handling of the product. A total of 125 Chinese- and English-language YouTube videos were analysed.

Major steps in handling procedures were identified, including rehydration, cutting/tearing and blanching. Around 62% of the videos failed to specify the water temperature for rehydration. Only three videos specified a water temperature of 100 °C for rehydrating the mushrooms, and 36% of the videos did not specify the soaking duration. Only one video showed handwashing, cleaning and sanitising of surfaces when handling the dried wood ear mushrooms.

This study found that most YouTube videos provided vague and inconsistent descriptions of the rehydration procedure, including water temperature and soaking duration. Food preparers were advised to use boiling water for rehydration to inactivate vegetative bacterial pathogens. However, boiling water alone is insufficient to inactivate all bacterial spores. Extended periods of soaking and storage could be of concern for spore germination and bacterial growth. More validation studies need to be conducted to provide guidance on how to safely handle the mushrooms.

This study will make a distinctive contribution to the field of food safety by being the first to investigate the handling procedure of a unique ethnic food ingredient, dried wood ear mushrooms, which has been linked to a previous outbreak and multiple recalls in the United States of America. The valuable data collected from this study can help target food handling education as well as influence future microbial validation study design and risk assessment.

In industrial applications, formaldehyde-based wood adhesives have been used extensively because of their low costs and high reactivity. However, their real-world applications are hindered by some main bottlenecks, especially the formaldehyde emission and usage of nonrenewable raw materials. The purpose of this study is the development of sustainable and formaldehyde-free wood adhesive formulation.

In this study, starch and tannin-based wood adhesive were synthesized. Chemical structures and thermal properties of the prepared bio-based resin formulations were elucidated by using Fourier transform infrared and differential scanning calorimetry analysis, respectively. Laboratory scale particleboard production was carried out to determine the performance of the developed resin formulations. Obtained results were evaluated in dry medium (P2) according to European norms EN 312 (2010). Furthermore, the board formaldehyde content was determined by using the perforator method according to the European Norm EN 12460-5.

The results show that the improved starch and tannin-based wood adhesives were successful in their adhesive capacity, and the formaldehyde content of the final product was obtained as low as 0.75 mg/100 g. This paper highlights that the presented adhesive formulations could be a potential eco-friendly and cost-effective alternative to the formaldehyde-based wood adhesives for interior particleboard production.

Starch-based resins in the liquid form needed to be continuously mixed throughout their shelf life to prevent the starch from settling because it was not possible to dissolve the precipitated starch again after a while. For this reason, starch was given to the chips in powder form while preparing the particleboard.

In conclusion, this study shows that the developed bio-based resin formulations have a high potential to be used for producing interior-grade particleboards instead of commercial formaldehyde-based wood adhesives because the obtained results generally satisfied the interior grade particleboard requirements according to European norms EN 312, P2 class (2010). In addition, it was determined that the produced boards had significantly low formaldehyde content. The low formaldehyde content of the final boards was not because of the resin but because of the natural structure of the wood raw material, press parameters and environmental factors.

The developed bio-based resin system made it possible to obtain boards with significantly low formaldehyde content compared to commercial resins.

The developed bio-based resin formulation made it possible to produce laboratory-scale board prototypes at lower press factors and board densities compared to their counterparts.

The wood construction industry has been described as slow in adapting efficiency-increasing activities in its operations and supply chain. The industry is still facing challenges related to digitalization, such as fragmentation, poor traceability and lack of real-time information. This study evaluates the status of digitalization in construction supply chains by thematically analyzing the existing literature and mapping research trends.

A review of the key literature from 2016 to 2021 was performed. The results highlight various technologies and their applications within supply chains and identify research gaps, especially between theoretical frameworks and actual implementation using a scientometric-thematic analysis.

This paper provides a conceptual framework to further aid researchers in exploring the current trends in Supply Chain 4.0 and its applications in the wood construction industry compared to other more advanced industries. Suggested directions for future research in the wood construction Supply Chain 4.0 are outlined.

The existing literature still lacks a comprehensive review of the potential of a digitalized supply chain, especially in the construction industry. This framework is pivotal to continue explaining and observing the best ways to accelerate and implement Supply Chain 4.0 practices for digitalized supply chain management (SCM) while focusing specifically on the wood construction industry. The literature review results will help develop a comprehensive framework for future research direction to create a clearer vision of the current state of digitalization in supply chains and focus on the wood construction supply chain, thus, fully achieving the benefits of Supply Chain 4.0 in the wood construction industry.

This study aims to use whiteness (WI) and yellowness indices (YI) that were calculated from the International Commission on Illumination (CIE) color parameter to evaluate the efficiency of some triazole fungicides [propiconazole (C₁₅H₁₇Cl₂N₃O₂) and tebuconazole (C₁₆H₂₂ClN₃O)] to protect wooden artifacts from fungal deterioration.

Archeological wooden samples were collected from some historical Islamic buildings in Cairo, Egypt. Three species of fungi were identified in previous work. Propiconazole and tebuconazole with different concentrations treated the infected wooden samples aged for different periods. WI and YI of studied samples were measured using UV spectrophotometer. Calibration and uncertainty estimation accompanied by color measurement were studied.

Studying the uncertainty sources of diffuse reflection of the standard white tiles revealed that the uncertainty of calibration for both the spectrophotometer and white tiles had the highest contribution. The treated samples with tebuconazole and propiconazole fungicides gave good resistance against fungal deterioration at 0.50% for WI and YI.

This study presents the importance of colorimetry in the conservation field because they are considered one of the most important criteria to evaluate conservation materials. From color measurements and their uncertainties, it became clear that triazole fungicides have good efficiency in the protection of wooden artifacts from fungal deterioration. The value of this study is that propiconazole and tebuconazole fungicides at 0.50% can be applied to archaeological wood that is endangered to improper conditions, especially in the case of high levels of relative humidity.

The purpose of this study is the development of sustainable and low-formaldehyde emission wood adhesive formulations.

Three-step urea formaldehyde (UF) resin has been in situ modified with calcium lignosulfonate (LS) and/or 1,4 butanediol diglycidyl ether (GE). The structural, chemical, thermal and morphological characterizations were carried out on resin samples. These resins have been applied for particleboard pressing, and UF, UF-LS and UF-GE were evaluated as P2 classes according to EN 312.

The results show that the improved LS- or diglycidyl ether-modified UF wood adhesives were successful in their adhesive capacity, and the formaldehyde content of the final product was obtained as low as 8 mg/100 g. This paper highlights that the presented adhesive formulations could be a potential eco-friendly and cost-effective alternative to formaldehyde-based wood adhesives for interior particleboard production.

Combination of LS and GE resulted in weaker mechanical properties and fulfilled P1 class particleboards due to temperature and duration conditions. Therefore, in situ usage of LS or GE in UF resins is highly recommended for particleboard pressing. Formaldehyde content of particleboards was determined with the perforator method according to EN 12460-5 and all of the particleboards exhibited E1 class. LS was more efficient in decreasing formaldehyde content than GE.

This study provides the application of particleboards with low formaldehyde emission.

The developed LS- and diglycidyl ether-modified UF resins made it possible to obtain boards with significantly low formaldehyde content compared with commercial resins.

The developed formaldehyde-based resin formulation made it possible to produce laboratory-scale board prototypes using LS or GE without sacrificing of press factors and panel quality.

A specific area of interest in the coaching literature is focused on exploring the intersection of personality and coaching; however, research has yet to explore whether coaching exerts reciprocal effects on personality traits (i.e. if personality trait change can accompany coaching). Utilizing the explanatory theoretical framing of the Demands-Affordances TrAnsactional framework (Woods et al., 2019), we propose that coaching may indirectly facilitate personality trait change by firstly enabling the coachee to reflect on their behaviors, second, implement desired behavioral changes which consequently facilitate personality trait change.

A quasi-experiment was conducted to explore coaching and personality trait change. Students participating in a demanding, work-based team simulation (N = 258), were assigned to either an intervention group (and received one-to-one coaching) or a control group (who received no intervention). Personality traits were measured before and after coaching and positioned as the dependent variable.

Results indicate that participants in the coaching group exhibited significant changes in self-reported agreeableness, conscientiousness, extraversion and core self-evaluations, which all significantly decreased after coaching; however, no change was observed for the control group.

We provide the first exploration of coaching and personality trait change, contributing to both the coaching literature, by providing evidence regarding the efficacy of coaching to facilitate personality trait change in coachees, and the personality literature, by highlighting coaching as an important tool for those interested in personality trait change. Our research also has implications for other interventions such as mentoring, as we provide support for the notion that interventions can support personality trait change.

There is a strong consensus among scholars that the international competitiveness of companies strongly depends on the support of institutions, which reduces uncertainty in transactions by giving form to economic interactions, while less attention was paid to the role of international standards within this context. This study intends to propose its contribution by deepening the role of process certifications in the competitiveness and internationalization strategies of companies, with specific reference to the wood-furniture sector.

Data were collected using a questionnaire survey distributed via computer-assisted web interviewing (CAWI) methodology and sent to a sample of 2,845 Italian companies which operate in the wood-furniture industry, using simple random sampling. Thanks to the survey administration, 228 companies participated to the survey.

The study shows that it is companies operating in international markets that define this tool as relevant; this underlines how certification is seen as a kind of business card for entering international markets. In this context, the role of business leadership emerges as fundamental in the practical definition of the objectives to be set by adopting a quality management systems and in the subsequent commitment to obtain them.

Up to now, the literature has taken these elements into analysis mainly considering the consumers' perspective. In sectors with a higher content of innovation, technology and design, such as the wood-furniture sector, the literature appears to be poor in terms of contributions.