Search results

There is recent emphasis on designing new materials and alloys specifically for metal additive manufacturing (AM) processes, in contrast to AM of existing alloys that were developed for other traditional manufacturing methods involving considerably different physics. Process optimization to determine processing recipes for newly developed materials is expensive and time-consuming. The purpose of the current work is to use a systematic printability assessment framework developed by the co-authors to determine windows of processing parameters to print defect-free parts from a binary nickel-niobium alloy (NiNb5) using laser powder bed fusion (LPBF) metal AM.

The printability assessment framework integrates analytical thermal modeling, uncertainty quantification and experimental characterization to determine processing windows for NiNb5 in an accelerated fashion. Test coupons and mechanical test samples were fabricated on a ProX 200 commercial LPBF system. A series of density, microstructure and mechanical property characterization was conducted to validate the proposed framework.

Near fully-dense parts with more than 99% density were successfully printed using the proposed framework. Furthermore, the mechanical properties of as-printed parts showed low variability, good tensile strength of up to 662 MPa and tensile ductility 51% higher than what has been reported in the literature.

Although many literature studies investigate process optimization for metal AM, there is a lack of a systematic printability assessment framework to determine manufacturing process parameters for newly designed AM materials in an accelerated fashion. Moreover, the majority of existing process optimization approaches involve either time- and cost-intensive experimental campaigns or require the use of proprietary computational materials codes. Through the use of a readily accessible analytical thermal model coupled with statistical calibration and uncertainty quantification techniques, the proposed framework achieves both efficiency and accessibility to the user. Furthermore, this study demonstrates that following this framework results in printed parts with low degrees of variability in their mechanical properties.

“Productivity Partnerships”, a regulars series of demonstrations held at The 600 Centre in Shepshed, saw the UK launch of a new machine loading robot system by Fanuc Robotics. A description is given of the rail‐mounted 6‐axis robot together with some of the claimed benefits. It is a system that has been well received in the USA and two brief examples of installations from that side of the Atlantic are given.

Additive manufacturing (AM) processes involve a layer-by-layer sintering of metallic powders to produce fully functional three-dimensional parts. This layer-by-layer building process provides a unique opportunity to enhance mechanical properties by applying treatments that previously were possible only on the surface in traditional manufacturing techniques. The purpose of the study is to examine the effect of ultrasonic peening (UP) applied during a layer-by-layer direct metal laser sintering (DMLS) fabrication of 316L stainless steel on its mechanical properties and microstructure.

Uniaxial tensile tests were performed at 1.27 mm/s to determine the effect of UP treatment on the average global behavior of a 316L part, whereas hardness measurements using nanoindentation were performed to determine the modification of local mechanical properties. Compressive buckling tests at a loading rate of 3 mm/min were performed on sample coupons with a large aspect ratio to evaluate the effect of UP on any potential delamination of DMLS layers. Techniques such as optical and scanning electron microscopy (SEM) imaging were utilized to determine the effect of UP on the microstructure.

Overall, significant modification in mechanical properties such as hardness and yield strength, along with microstructure, was observed. Large increases in both the average global and local mechanical properties, as well as a disruption in the columnar grain microstructure, was observed in DMLS parts treated with UP treatment.

Results indicate an opportunity for UP to be used as an in-situ process during AM processes for dynamically altering the mechanical behavior, microstructure, and distortion due to residual stress formation, in a tunable fashion.

The present research work aims to study the effect of average beam power (laser process parameters) on the overlapping factor, depth of penetration (DOP), weld bead width, fusion zone and heat affected zone (HAZ) in laser welding of 304L and st37 steel. Back side and top surface morphology of the welded joints have also been studied for varying average beam power.

Laser welding of austenitic stainless steel (304L) and carbon steel (st37) was carried out using Nd:YAG laser integrated with ABB IRB 1410 robot in pulse mode. The selection of laser process parameters was based on the specification of available laser welding machine. Dissimilar laser welding of 304L and st37 carbon steel for full depth of penetration have been performed, with varying average beam power (225-510W) and constant welding speed (5mm/s) and pulse width (5ms).

Recrystallized coarse grains were observed adjacent to the fusion zone and nucleated grains were seen away from the fusion zone towards carbon steel. Overlapping factor and HAZ width st37 side increases with increase in average beam power whereas top weld bead width increases first, attains maximum value and then subsequently decreases. Bottom weld bead width increases with increase in average beam power. The mechanical properties namely microhardness and tensile strength of the welded joints have been investigated with varying average beam power.

In the recent development of the automobile, power generation and petrochemical industries the application of dissimilar laser welding of austenitic stainless steel (304L) and carbon steel (st37) are gaining importance. Very limited work have been reported in pulsed Nd:YAG dissimilar laser welding of austenitic stainless steel (304L) and carbon steel (st37) for investigating the effect of laser process parameters on weld bead geometry, microstructural characterization and mechanical properties of the welded joint.

For many applications, including space applications, the usability and performance of a component is dependent on the surface topology of the additively manufactured part. The purpose of this paper is to present an investigation into minimizing the residual surface roughness of direct metal laser sintering (DMLS) samples by manipulating the input process parameters.

First, the ability to manipulate surface roughness by modifying processing parameters was explored. Next, the surface topography was characterized to quantify roughness. Finally, microthruster nozzles were created both additively and conventionally for flow testing and comparison.

Surface roughness of DMLS samples was found to be highly dependent on the laser power and scan speed. Because of unintended partially sintered particles adhering to the surface, a localized laser fluence mechanism was explored. Experimental results show that surface roughness is influenced by the varied parameters but is not a completely fluence driven process; therefore, a relationship between laser fluence and surface roughness can be incorporated but not completely assumed.

This paper serves as an aid in understanding the importance of surface roughness and the mechanisms associated with DMLS. Rather than exploring a more common global energy density, a localized laser fluence was initiated. Moreover, the methodology and conclusions can be used when optimizing parts via metal additive manufacturing.

Subtractive rapid prototyping (SRP) uses layer‐based removal from a plurality of orientations in order to create geometry in a highly automated manner. However, unlike additive means, the method can be inefficient due to redundant cutting operations on previously machined regions. The purpose of this paper is to present process planning methods for SRP, specifically dealing with stock material management in multiple setup operations.

Analysis of remaining stock material was performed by considering slices of respective stereolithography (STL) models. Further, an initial approximation was made of accessibility to enable iterative visibility analysis. The combination of these approaches led to efficient and fast algorithms. After analysis, the slices could be converted back to useful STL models through polyhedral reconstruction.

This method of approximation yields results similar to exact geometry. Using remaining stock data from this approach leads to a significant reduction in tool path length and processing time in SRP.

This paper presents novel methods of geometric representation and inaccessible volume calculation for four‐axis layer‐based machining and shows a successful implementation in an SRP system.

This paper aims to focus on analysing the wear characteristics of tungsten carbide tools on which various micro patterns are fabricated to study its effect on the machinability of Ti-6Al-4V at dry turning conditions.

Micro-patterns such as dimples, linear grooves and a novel combination of dimples and linear grooves were fabricated on rake faces of uncoated tools by micro-EDM process. Impact of these patterns on tool wear and chip morphology characteristics under dry machining conditions were analysed, and their performances were compared with the non-textured tool (NTT).

Encouraging results in terms of minimal tool wear and favourable chip morphology characteristics were observed in case of all the textured tools, which demonstrated better tribological characteristics in contrast to NTT. The average flank wear was reduced by 43.5, 32 and 24.7% in dimple textured tool (DTT), linear textured tool (LTT) and hybrid textured tool (HTT), respectively, as compared to NTT. The average chip curl diameters measured for NTT, DTT, LTT, and HTT were observed to be 6.60, 3.51, 4.0 and 4.31 mm, respectively.

The contribution of this work lies in fabricating innovative patterns using cost-effective micro-EDM process and analysing how the patterns, depending upon their dimensional area and wear debris accumulation characteristics, influence the machinability of Ti-6Al-4V in the absence of any lubrication mediums.