Search results

The purpose of the paper is to predict the aerodynamic performance of a complete scale model H-Darrieus vertical axis wind turbine (VAWT) with end plates at different operating conditions. This paper aims at understanding the flow physics around a model VAWT for three different tip speed ratios corresponding to three different flow regimes.

This study achieves a first three-dimensional hybrid lattice Boltzmann method/very large eddy simulation (LBM-VLES) model for a complete scaled model VAWT with end plates and mast using the solver PowerFLOW. The power curve predicted from the numerical simulations is compared with the experimental data collected at Erlangen University. This study highlights the complexity of the turbulent flow features that are seen at three different operational regimes of the turbine using instantaneous flow structures, mean velocity, pressure iso-contours, blade loading and skin friction plots.

The power curve predicted using the LBM-VLES approach and setup provides a good overall match with the experimental power curve, with the peak and drop after the operational point being captured. Variable turbulent flow structures are seen over the azimuthal revolution that depends on the tip speed ratio (TSR). Significant dynamic stall structures are seen in the upwind phase and at the end of the downwind phase of rotation in the deep stall regime. Strong blade wake interactions and turbulent flow structures are seen inside the rotor at higher TSRs.

The computational cost and time for such high-fidelity simulations using the LBM-VLES remains expensive. Each simulation requires around a week using supercomputing facilities. Further studies need to be performed to improve analytical VAWT models using inputs/calibration from high fidelity simulation databases. As a future work, the impact of turbulent and nonuniform inflow conditions that are more representative of a typical urban environment also needs to be investigated.

The LBM methodology is shown to be a reliable approach for VAWT power prediction. Dynamic stall and blade wake interactions reduce the aerodynamic performance of a VAWT. An ideal operation close to the peak of the power curve should be favored based on the local wind resource, as this point exhibits a smoother variation of forces improving operational performance. The 3D flow features also exhibit a significant wake asymmetry that could impact the optimal layout of VAWT clusters to increase their power density. The present work also highlights the importance of 3D simulations of the complete model including the support structures such as end plates and mast.

Accurate predictions of power performance for Darrieus VAWTs could help in better siting of wind turbines thus improving return of investment and reducing levelized cost of energy. It could promote the development of onsite electricity generation, especially for industrial sites/urban areas and renew interest for VAWT wind farms.

A first high-fidelity simulation of a complete VAWT with end plates and supporting structures has been performed using the LBM approach and compared with experimental data. The 3D flow physics has been analyzed at different operating regimes of the turbine. These physical insights and prediction capabilities of this approach could be useful for commercial VAWT manufacturers.

The purpose of this paper is to enlarge the body of knowledge on research through design (RtD) methods that can be employed by landscape architects and others working on (but not limited to) sustainable energy transition.

A specific approach to RtD – qualitative landscape structure analysis (QLSA) – is introduced and illustrated by means of diagrams and photographs. Two case studies showcase the application of QLSA for research on solar parks in the Netherlands and research on wind turbines in the Alpine foothills in Southern Germany.

The case studies show how RtD can help to define design principles for large solar parks and arrangement of wind turbines in particular landscape types in the Netherlands and Germany, respectively. In doing so, RtD can help to expand the breadth of spatial research beyond well-established methods such as multi-criteria decision analysis and environmental impact assessment.

The paper provides insights into contemporary RtD in two countries and affirms the importance of such research with regard to landscape transformations while starting to define a research niche for landscape architects and other environmental designers working on the topic of sustainable energy transition.

A flexible model which is based on a Triangular intuitionistic flexibility ranking and aggregating (TIFRA) operator is proposed for failure detection and reliability management in a Wind Turbine system. The model which is employed when there are limited research data and valid source of information, uses expert-based knowledge/opinion for failure detection and reliability management. The results from the study concludes that, the most important area affected by failure with respect to the failure criteria used, includes; oil level sensor tilt sensors for tower installation and accelerometers for tower sway (A₂), Pressure sensor for blade monitoring (A₃), and the Pitch actuator (A₄). The main advantage of the proposed method is that it provides advanced information about faults that identifies the intensity of the system behavior also; the method provides a more complete view of the reliability management and root cause of failure in the Wind Turbine (WT) system using the flexibility parameter in the model.

Fault diagnosis methods based on blind source separation (BSS) for rolling element bearings are necessary tools to prevent any unexpected accidents. In the field application, the actual signal acquisition is usually hindered by certain restrictions, such as the limited number of signal channels. The purpose of this study is to fulfill the weakness of the existed BSS method.

To deal with this problem, this paper proposes a blind source extraction (BSE) method for bearing fault diagnosis based on empirical mode decomposition (EMD) and temporal correlation. First, a single-channel undetermined BSS problem is transformed into a determined BSS problem using the EMD algorithm. Then, the desired fault signal is extracted from selected intrinsic mode functions with a multi-shift correlation method.

Experimental results prove the extracted fault signal can be easily identified through the envelope spectrum. The application of the proposed method is validated using simulated signals and rolling element bearing signals of the train axle.

This paper proposes an underdetermined BSE method based on the EMD and the temporal correlation method for rolling element bearings. A simulated signal and two bearing fault signal from the train rolling element bearings show that the proposed method can well extract the bearing fault signal. Note that the proposed method can extract the periodic fault signal for bearing fault diagnosis. Thus, it should be helpful in the diagnosis of other rotating machinery, such as gears or blades.

This paper aims to report on a case study concerning the development of sustainable energy partnerships involving engineering faculty and undergraduate students at the University of Girona, Catalonia, Spain.

Faculty were motivated to seek partnerships with public and private entities in the local area for the purposes of realising mutually beneficial outcomes. The educational programmes of future engineers, when sustainability is considered, are analysed. Education for sustainable development has to include multidisciplinary active learning as a desirable competence. Active learning can be obtained when problems are based on real life because they are most motivating for students. Constructive alignment component is obtained because learning objectives are linked with learning activities related to the needs of public and private entities.

Through the provision of technical expertise, the adoption and success of renewable energy projects was facilitated on the one hand, while final year undergraduate students benefited in terms of hands-on experience in helping to bring these projects to life, drawing on the knowledge and skills they had acquired throughout their degree programmes. These works are addressed to students by faculty members with the aim of developing and promoting renewable energies. Outcomes from partnerships surpassed expectations; not only were different benefits realised as were initially hoped for, but this success led to partnerships being sustained over time.

Fossil fuel-based energy systems are associated with a myriad of negative environmental and social externalities. It is difficult to overstate the importance of transitioning towards alternative low carbon energy sources for climate change mitigation which are less centralised compared to the status-quo for energy security and energy independence. By actively facilitating the development of decentralised renewable energy sources in Catalonia, the projects reported herein are of significant value in social environmental and educational terms.

Until recently, the Gulf Cooperation Council (GCC) region, whose members consist of Saudi Arabia, the United Arab Emirates, Kuwait, Qatar, Oman and Bahrain, has not significantly focused on the green transition. Specifically, wind energy development has made minimal progress relative to that of other regions.

The abundance of cheap fossil fuels in the region has not incentivized renewable energy development, and where this has taken place solar technologies are often preferred.

However, lower technology costs together with lost investment opportunities – also common elsewhere in the world, has increased the pressure on the GCC region from developers. This work qualitatively addresses the challenges and the strategies for the wind development in the area. It focuses on the analysis of different proposed type of investments – driven by a state-supported proposed fund – such as utility-scale investments, industry-specific investments, manufacturing investments and regional accelerators.

The work also suggests that Gulf sovereign wealth funds should act as the lead investors under new schemes, such as joint ventures, for wind development in the GCC, using their wealth to offering their populations with new sources of employment as well as energy that is sustainable.

This study aims to form a new concept of power-to-gas-based virtual power plant (GVPP) and propose a low-carbon economic scheduling optimization model for GVPP considering carbon emission trading.

In view of the strong uncertainty of wind power and photovoltaic power generation in GVPP, the information gap decision theory (IGDT) is used to measure the uncertainty tolerance threshold under different expected target deviations of the decision-makers. To verify the feasibility and effectiveness of the proposed model, nine-node energy hub was selected as the simulation system.

GVPP can coordinate and optimize the output of electricity-to-gas and gas turbines according to the difference in gas and electricity prices in the electricity market and the natural gas market at different times. The IGDT method can be used to describe the impact of wind and solar uncertainty in GVPP. Carbon emission rights trading can increase the operating space of power to gas (P2G) and reduce the operating cost of GVPP.

This study considers the electrical conversion and spatio-temporal calming characteristics of P2G, integrates it with VPP into GVPP and uses the IGDT method to describe the impact of wind and solar uncertainty and then proposes a GVPP near-zero carbon random scheduling optimization model based on IGDT.

This study designed a novel structure of the GVPP integrating P2G, gas storage device into the VPP and proposed a basic near-zero carbon scheduling optimization model for GVPP under the optimization goal of minimizing operating costs. At last, this study constructed a stochastic scheduling optimization model for GVPP.

Digital twin (DT) is an emerging technology that enables sophisticated interaction between physical objects and their virtual replicas. Although DT has recently gained significant attraction in both industry and academia, there is no systematic understanding of DT from its development history to its different concepts and applications in disparate disciplines. The majority of DT literature focuses on the conceptual development of DT frameworks for a specific implementation area. Hence, this paper provides a state-of-the-art review of DT history, different definitions and models, and six types of key enabling technologies. The review also provides a comprehensive survey of DT applications from two perspectives: (1) applications in four product-lifecycle phases, i.e. product design, manufacturing, operation and maintenance, and recycling and (2) applications in four categorized engineering fields, including aerospace engineering, tunneling and underground engineering, wind engineering and Internet of things (IoT) applications. DT frameworks, characteristic components, key technologies and specific applications are extracted for each DT category in this paper. A comprehensive survey of the DT references reveals the following findings: (1) The majority of existing DT models only involve one-way data transfer from physical entities to virtual models and (2) There is a lack of consideration of the environmental coupling, which results in the inaccurate representation of the virtual components in existing DT models. Thus, this paper highlights the role of environmental factor in DT enabling technologies and in categorized engineering applications. In addition, the review discusses the key challenges and provides future work for constructing DTs of complex engineering systems.

Green energy as a transportation supply trend is irreversible. In this paper, a highway energy supply system (HESS) evolution model is proposed to provide highway transportation vehicles and service facilities with a clean electricity supply and form a new model of a source-grid-load-storage-charge synergistic highway-PV-WT integrated system (HPWIS). This paper aims to improve the flexibility index of highways and increase CO₂ emission reduction of highways.

To maximize the integration potential, a new energy-generation, storage and information-integration station is established with a dynamic master–slave game model. The flexibility index is defined to evaluate the system ability to manage random fluctuations in power generation and load levels. Moreover, CO₂ emission reduction is also quantified. Finally, the Lianhuo Expressway is taken as an example to calculate emission reduction and flexibility.

The results show that through the application of the scheduling strategy to the HPWIS, the flexibility index of the Lianhuo Expressway increased by 29.17%, promoting a corresponding decrease in CO₂ emissions.

This paper proposed a new model to capture the evolution of the HESS, which provides highway transportation vehicles and service facilities with a clean electricity supply and achieves energy transfer aided by an energy storage system, thus forming a new model of a transportation energy system with source-grid-load-storage-charge synergy. An evaluation method is proposed to improve the air quality index through the coordination of new energy generation and environmental conditions, and dynamic configuration and dispatch are achieved with the master–slave game model.

Despite South Africa’s ailing electrical grid, substantial renewable energy (RE) integration is planned for the country. As grid-integrated RE affects all grids differently, this study aims to develop an adaptable grid code-guided renewable power plant (RPP) control real-time simulation testbed, tailored to South African grid code requirements to study grid-integrated RE’s behaviour concerning South Africa’s unique conditions.

The testbed is designed using MATLAB’s Simulink and live script environments, to create an adaptable model where grid, RPP and RPP guiding grid codes are tailorable. This model is integrated with OPAL-RT’s RT-LAB and brought to real-time simulation using OPAL-RT’s OP4510 simulator. Voltage, frequency and short-circuit event case studies are performed through which the testbed’s abilities and performance are assessed.

Case study results show the following. The testbed accurately represents grid code voltage and frequency requirements. RPP point of connection (POC) conditions are consistently recognized and tracked, according to which the testbed then operates simulated RPPs, validating its design. Short-circuit event simulations show the simulated wind farm supports POC conditions relative to short-circuit intensity by curtailing active power in favour of reactive power, in line with local grid code requirements.

To the best of the authors’ knowledge, this is the first design of an adaptable grid code-guided RPP control testbed, tailored to South African grid code requirements in line with which RPP behavioural and grid integration studies can be performed.