Search results

The purpose of this paper is to develop a simple chaotic circuit. The circuit can be fabricated by less discrete electronic components, within which complex dynamical behaviors can be generated.

A second-order non-autonomous inductor-free chaotic circuit is presented, which is obtained by introducing a sinusoidal voltage stimulus into the classical Wien-bridge oscillator. The proposed circuit only has two dynamic elements, and its nonlinearity is realized by the saturation characteristic of the operational amplifier in the classical Wien-bridge oscillator. After that, its dynamical behaviors are revealed by means of bifurcation diagram, Lyapunov exponent and phase portrait and further confirmed using the 0-1 test method. Moreover, an analog circuit using less discrete electronic components is implemented, and its experimental results are measured to verify the numerical simulations.

The equilibrium point located in a line segment varies with time evolution, which leads to the occurrence of periodic, quasi-periodic and chaotic behaviors in the proposed circuit.

Unlike the previously published works, the significant values of the proposed circuit with simple topology are inductor-free realization and without extra nonlinearity, which make the circuit can be used as a paradigm for academic teaching and experimental illustraction for chaos.

This paper aims to classify the inductorless Chua’s circuits into two types from the topological structures and construct a chaotic circuit under this new classification framework.

In this paper, two types of inductorless Chua’s circuit models are presented from topological structure, among which the first type of inductorless Chua’s circuit (FTICC) model is much closer to the original Chua’s circuit. Under this classification framework, a new inductorless Chua’s circuit that belongs to the FTICC model is built by replacing LC parallel resonance of the original Chua’s circuit with a second order Sallen–Key band pass filter.

Compared with a paradigm of a reported inductorless Chua’s circuit that belongs to the second type of inductorless Chua’s circuit (STICC) model, the newly proposed circuit can present the attractors which are much more closely to the original Chua’s attractors. The dynamical behaviors of coexisting period-doubling bifurcation patterns and boundary crisis are discovered in the newly proposed circuit from both numerical simulations and experimental measurements. Moreover, a crisis scenario is observed that unmixed pairs of symmetric coexisting limit cycles with period-3 traverse through the entire parameter interval between coexisting single-scroll chaotic attractors and double-scroll chaotic attractor.

The newly constructed circuit enriches the family of inductorless Chua’s circuits, and its simple topology with small printed circuit board size facilitates the various types of engineering applications based on chaos.

The recent Symposium on Electronics Laboratories (May, June and July issues) prompts me to report briefly an experiment in progress in Gloucester which may be of interest to those who also are convinced that there is need for much improvement in technical college laboratory practice. It is perhaps still a little premature to write at this stage since the experiment has had only one trial, so that what follows is by no means necessarily the best or only solution.

An investigation to evaluate the suitability of anodised aluminium as a substrate material has shown that the relatively high coefficient of thermal expansion of the aluminium caused the brittle cermet resistors to craze giving rise to unstable resistance values whereas PTF resistors appeared to suffer no ill effects. The work was implemented in conjunction with selection of low temperature thick film conductor and resistor inks to achieve the optimum combination of anodised aluminium substrate and ink system. These inks were then printed and fired on anodised aluminium, aluminium nitride and alumina substrates, and the physical and electrical properties of the inks and substrates compared. A combination of modest success, employing polymer resistors and cermet conductors, produced viable circuits with resistors of reasonable stability. A low power hybrid device, with surface mounted components, was employed to further validate the substrate/ink combinations in ongoing tests.

ISHM, acting as a professional body for a very large sector of microelectronics manufacturing and design, naturally takes a strong and active interest in the education and training of people working in its industry. An annual Education Prize is awarded by the Society at either undergraduate or post‐graduate level and sometimes both. The aim of the awards is to encourage the writing up of work completed by students as part of the education route. It may be from an internal project such as a B.Eng. report or a Masters Dissertation. It may also be work done by the student in an industrial placement. These three authors or their institutions have been associated with entries which have been awarded a prize. The winning paper is normally published in Hybrid Circuits.

The purpose of this paper is to construct a flux-controlled memcapacitor (MC) emulator without grounded restriction with the binary operation ability. The active first-order low-pass filter (LPF) and high-pass filter (HPF) circuits are constructed by replacing the capacitor with MC.

The output saturation of the active device is innovatively adopted to realize the binary operation of MC with two memcapacitance values. By applying the direct current control voltage together with the input signal, the memcapacitance can be controlled, and hence, cut-off frequency of the filters can be adjusted without changing the circuit structure.

Experiments and simulation results show that the new filter has good frequency selectivity. Both LPF and HPF can change the cut-off frequency by changing the positive and negative control voltage. The experimental and simulation results are in good agreement with the theoretical analysis, which proves the feasibility and validity of the emulator and the filters.

These MC emulators are simple and easy to physically fabricate, which have been increasingly used for experiment. It also provide an effective reference for device miniaturization and low power consumption.

The purpose of this paper is to construct a proportion-integral-type (PI-type) memristor, which is different from that of the previous memristor emulator, but the constructing memristive chaotic circuit possesses line equilibrium, leading to the emergence of the initial conditions-related dynamical behaviors.

This paper presents a PI-type memristor emulator-based canonical Chua’s chaotic circuit. With the established mathematical model, the stability region for the line equilibrium is derived, which mainly consists of stable and unstable regions, leading to the emergence of bi-stability because of the appearance of a memristor. Initial conditions-related dynamical behaviors are investigated by some numerically simulated methods, such as phase plane orbit, bifurcation diagram, Lyapunov exponent spectrum, basin of the attraction and 0-1 test. Additionally, PSIM circuit simulations are executed and the seized results validate complex dynamical behaviors in the proposed memristive circuit.

The system exhibits the bi-stability phenomenon and demonstrates complex initial conditions-related bifurcation behaviors with the variation of system parameters, which leads to the occurrence of the hyperchaos, chaos, quasi-periodic and period behaviors in the proposed circuit.

These memristor emulators are simple and easy to physically fabricate, which have been increasingly used for experimentally demonstrating some interesting and striking dynamical behaviors in the memristor-based circuits and systems.

This paper is aimed at investigating a novel chemical oscillating chaotic system with different attractors at fixed parameters. The typical dynamical behavior of the new chemical oscillating system is discussed, and it is found that the state selection is dependent on initial values. Then, the stabilization problem of the chemical oscillating attractors is investigated analytically and numerically. Subsequently, the novel electronic circuit of the proposed chemical oscillating chaotic system are constructed, and the influences of the changes of circuit parameters on chemical oscillating chaotic attractors are investigated.

The different attractors of the novel chemical oscillating chaotic system are investigated by changing the initial values under fixed parameters. Moreover, the active control and adaptive control methods are presented to make the chemical oscillating chaotic systems asymptotically stable at the origin based on the Lyapunov stability theory. The influences on chemical oscillating chaotic attractors are also verified by changing the circuit parameters.

It is found that the active control method is easier to be realized by using physical components because of its less control signal and lower cost. It is also confirmed that the adaptive control method enjoys strong anti-interference ability because of its large number of selected controllers. What can be seen from the simulation results is that the chaotic circuits are extremely dependent on circuit parameters selection. Comparisons between MATLAB simulations and Multisim simulation results show that they are consistent with each other and demonstrate that changing attractors of the chemical oscillating chaotic system exist. It is conformed that circuit parameters selection can be effective to control and realize chaotic circuits.

The different attractors of the novel chemical oscillating chaotic system are investigated by changing the initial values under fixed parameters. The characteristic of the chemical oscillating attractor is that the basin of attraction of the three-dimensional attractor is located in the first quadrant of the eight quadrants of the three-dimensional space, and the ranges of the three variables are positive. This is because the concentrations of the three chemical substances are all positive.

This paper aims to investigate the singular Hopf bifurcation and mixed mode oscillations (MMOs) in the perturbed Bonhoeffer-van der Pol (BVP) circuit. There is a singular periodic orbit constructed by the switching between the stable focus and large amplitude relaxation cycles. Using a generalized fast/slow analysis, the authors show the generation mechanism of two distinct kinds of MMOs.

The parametric modulation can be used to generate complicated dynamics. The BVP circuit is constructed as an example for second-order differential equation with periodic perturbation. Then the authors draw the bifurcation parameter diagram in terms of a containing two attractive regions, i.e. the stable relaxation cycle and the stable focus. The transition mechanism and characteristic features are investigated intensively by one-fast/two-slow analysis combined with bifurcation theory.

Periodic perturbation can suppress nonlinear circuit dynamic to a singular periodic orbit. The combination of these small oscillations with the large amplitude oscillations that occur due to canard cycles yields such MMOs. The results connect the theory of the singular Hopf bifurcation enabling easier calculations of where the oscillations occur.

By treating the perturbation as the second slow variable, the authors obtain that the MMOs are due to the canards in a supercritical case or in a subcritical case. This study can reveal the transition mechanism for multi-time scale characteristics in perturbed circuit. The information gained from such results can be extended to periodically perturbed circuits.

The ammeter can measure the direct current and low-frequency alternating current through the wires, but it is difficult to measure complex waveforms. The oscilloscope can measure complex waveforms, but it is easy to measure the voltage waveform and difficult to measure the current waveform. Thus, how to measure complex current waveforms with oscilloscope is an important and crucial issue that needs to be solved in practical engineering applications. To solve the above problems, an active short circuit line method is proposed to measure the volt-ampere characteristic curve of chaotic circuits.

In this paper, an active short circuit line method is proposed to measure the volt-ampere characteristic curve of various chaotic circuits especially for memristive systems. A memristor-based chaotic system is introduced, and the corresponding memristor-based circuit is constructed and implemented by using electronic components.

The chaotic attractors and volt-ampere characteristic curve of the memristor-based chaotic circuit are successfully analyzed and verified by oscilloscope measurement with the proposed active short circuit line method. Accordingly, the hardware circuit experiments are carried out to validate the effectiveness and feasibility of the active short circuit line method for these chaotic circuits. A good agreement is shown between the numerical simulations and the experimental results.

The primary contributions of this paper are as follows: an active short circuit line method for measuring the volt-ampere characteristic curve of chaotic circuits is proposed for the first time. A memristor-based chaotic system is also constructed by using memristor as nonlinear term. Then, the active short circuit line method is applied to measure the volt-ampere characteristic curve of the corresponding memristor-based chaotic circuit.