Search results

A bad safety accident at a manufacturing company usually results in casualties and economic losses. The company affected by such an accident must deal with pressure from multiple stakeholder groups. Employees, in particular, play a key role in pushing the affected company to develop strategies to improve occupational safety and health. The purpose of this paper is to seek answers to two questions: does a safety accident affect employee behavior in terms of giving up prospects to develop a career at the affected company? If yes, could innovation initiatives adopted by the company help moderate the negative consequences from a safety accident?

By investigating 120 safety accidents reported by publicly listed Chinese manufacturing companies between 2009 and 2016, the authors conduct an empirical study using regression-based statistical hypotheses testing to describe the companies’ responses and prospects for their employees.

The results show that the magnitude of the accident and the accident being caused by an employee error positively affect the turnover of employees. Furthermore, technical innovation initiatives, such as spending on R&D, by the accident-affected companies increase the positive effect of the accident magnitude on employee turnover. On the contrary, management innovation initiatives, such as corporate social responsibility activities, weaken the impact of the accident magnitude and employee error on employee turnover.

This study contributes to knowledge development by adding a crisis perspective in human resource management research. It helps to better understand the impact of safety accidents on employee behavior and the response taken by companies through innovation initiatives.

This paper aims to present error compensation based on surface reconstruction to improve the positioning accuracy of industrial robots.

In previous research, it has been proved that the positioning error of industrial robots is continuous on the two-dimensional manifold of six-joint space. The point cloud generated by positioning error data can be used to fit the continuous surfaces, which makes it possible to apply surface reconstruction on error compensation. The moving least-squares interpolation and the B-spline method are used for the error surface reconstruction.

The results of experiments and simulations validate the effectiveness of error compensation by the moving least-squares interpolation and the B-spline method.

The proposed methods can control the average of compensated positioning error within 0.2 mm, which meets the requirement of a tolerance (±0.5 mm) for fastener hole drilling in aircraft assembly.

The error surface reconstruction based on the B-spline method has great superiority because fewer sample points are needed to use this method than others while keeping the compensation accuracy at the same level. The control points of the B-spline error surface can be adjusted with measured data, which can be applied for the error prediction in any temperature field.

Enterprises build online product community to expect users to contribute: opinion sharing (content contribution) and product consumption (product contribution). Previous literature rarely focused on both. The purpose of this paper is to explain user contribution mechanism by identifying content contribution and product contribution.

This research chose Xiaomi-hosted online product community (bbs.xiaomi.cn) and Huawei-hosted online product community (club.huawei.com) where users can freely share ideas and buy products at the same time. Data were crawled from 109,665 community users to construct dependent variable measurement, and 611 questionnaires were used to verify research hypotheses.

The results indicate that both cognitive needs and personal integration needs have a significant positive impact on browse behavior; social integration needs and hedonic needs have a significant positive impact on content contribution behavior. Browse behavior not only directly affects but also indirectly influences product contribution through content contribution behavior.

Findings of this research provide community managers with useful insights into the relationship between content contribution and product contribution.

This study explains the formation mechanism of user product contribution and reveals the relationship between user content contribution and product contribution in online product community. This paper provides a different way of theorizing user contributions by incorporating uses and gratifications theory into the “Motivation-Behavior-Result” framework.

This study aims to report the preparation, selective laser sintering (SLS) processing and properties of a new nylon elastomer powder. The effects of solvent, dissolution temperature and time and cooling method and speed on the particle size and morphologies of the prepared nylon elastomer powder are investigated.

The prepared nylon elastomer power possesses the particle size of around 50 mm and is spherical in shape, indicating that this study provides the feasible dissolution-precipitation process, a distillation cooling method and a suitable solvent to prepare nylon elastomer powders.

Compared to pure nylon 12, the nylon elastomer has a lower part bed temperature and a wider sintering window for the SLS process. The wider sintering window indicates the better SLS processibility. The lower part bed temperature is beneficial to the recycling of material and the decrease in the requirement of SLS equipment.

The nylon elastomer in this study has a lower part bed temperature and a wider sintering window for the SLS process. The wider sintering window indicates better SLS processibility. The lower part bed temperature is beneficial to the recycling of material and the decrease in the requirement of SLS equipment.

Semi-crystalline polymers such as polyamide-12 can be used for selective laser sintering (SLS) to make near-fully dense plastic parts. At present, however, the types of semi-crystalline polymers suitable for SLS are critically limited. Therefore, the purpose of this paper is to investigate the processibility of a new kind of semi-crystalline polypropylene (PP) with low isotacticity for SLS process.

The SLS processibility of the PP powder, including particle size and shape, sintering window, degree of crystallinity and degradation temperature, was evaluated. Effects of the applied laser energy density on the surface micromorphology, density, tensile strength and thermal properties of SLS-built PP specimens were studied.

The results show that the PP powder has a nearly spherical shape, smooth surfaces, an appropriate average particle size of 63.6 μm, a broad sintering window of 21 oC and low crystalline degree of 30.4 per cent comparable to that of polyamide-12, a high degradation temperature of 381.8°C and low part bed temperature of 105°C, indicating a very good SLS processibility. The density and the tensile strength first increase with increasing laser energy density until they reach the maximum values of 0.831 g/cm3 and 19.9 MPa, respectively, at the laser energy density of 0.0458 J/mm², and then decrease when the applied laser energy density continue to increase owing to the degradation of PP powders. The complex PP components have been manufactured by SLS using the optimum parameters, which are strong enough to be directly used as functional parts.

This paper provides a new knowledge for this field that low-isotacticity PPs exhibit good SLS processibility, therefore increasing material types and broadening the application of SLS technology.

The type 120 emergency valve is an essential braking component of railway freight trains, but corresponding diaphragms consisting of natural rubber (NR) and chloroprene rubber (CR) exhibit insufficient aging resistance and low-temperature resistance, respectively. In order to develop type 120 emergency valve rubber diaphragms with long-life and high-performance, low-temperatureresistant CR and NR were processed.

The physical properties of the low-temperature-resistant CR and NR were tested by low-temperature stretching, dynamic mechanical analysis, differential scanning calorimetry and thermogravimetric analysis. Single-valve and single-vehicle tests of type 120 emergency valves were carried out for emergency diaphragms consisting of NR and CR.

The low-temperature-resistant CR and NR exhibited excellent physical properties. The elasticity and low-temperature resistance of NR were superior to those of CR, whereas the mechanical properties of the two rubbers were similar in the temperature range of 0 °C–150 °C. The NR and CR emergency diaphragms met the requirements of the single-valve test. In the low-temperature single-vehicle test, only the low-temperature sensitivity test of the NR emergency diaphragm met the requirements.

The innovation of this study is that it provides valuable data and experience for future development of type 120 valve rubber diaphragms.

The purpose of technology mergers and acquisitions (M&A) is to achieve innovation. The authors use the data from the China Patent Research System of China National Intellectual Property Administration to classify technical correlations into three types: similar, complementary and nonrelatedness (cross-sectoral category). And the authors explore three issues: the market reaction to technology-oriented M&A, the impact of technology-oriented M&A on goodwill and how technology-oriented M&A affects innovation.

The authors use data from China Patent Research System of China National Intellectual Property Administration to classify technical correlations into three types: similar, complementary and nonrelatedness (cross-sectoral category). And the authors explore three issues: the market reaction of technology-oriented M&A, the impact of technology-oriented M&A on goodwill and how technology-oriented M&A affects innovation. The empirical research shows that the cross-sectoral M&A is popular in the market and is positively correlated with cumulative abnormal return (CAR) and premium rate of M&A. However, the technology-similarity M&A, which is committed to in-depth exploration of original technology, is negatively correlated with CAR and goodwill.

The empirical research shows that cross-sectoral M&A is popular in the market and is positively correlated with CAR and premium rate of M&A. However, the technology-similarity M&A, which is committed to in-depth exploration of original technology, is negatively correlated with CAR and goodwill. In addition, empirical results show that there is an inverted U-shaped relationship between technology-oriented M&A and innovation output, and the inflection points are 41.8%, 48.9% and 38.8%, respectively.

The research contributions of this paper are as follows: first, most domestic studies simply and roughly measure the degree of technical relevance based on whether the firms belong to the same industry and whether there is common knowledge between them, but the authors provide a more accurate measure of technology-oriented M&A. Second, in the research on the economic consequences of technology-oriented M&As, a large number of literatures have mainly focused on the innovation performance of the acquirer after deals, including the number of patent applications, the number of patent citations, innovation output, etc., and they pay less attention to its impact on the market reaction and goodwill.

The purpose of this study is to ensure the safe use of carbon fiber composite pressure vessels in the nuclear industry environment.

This study investigated the degradation behaviors of carbon fiber reinforced composite (CFRP) using the specific corrosive media HF solution, with a focus on the damage to the surface epoxy layer. The degradation behaviors of CFRP in HF solution were examined by electrochemical methods and surface characterization, using HCl, NaCl and NaF solution for comparison.

The results showed that the specimen in HF solution will have a value of |Z|_0.01 Hz one order of magnitude lower, a substantially lower contact angle, more breakage of the surface epoxy and the stronger O─H peak and weaker C─O─C peak in the Fourier transform infrared spectrum, indicating severe hydrolytic damage to the surface epoxy.

The work focuses on the degradation damage to CFRP surface epoxy by specific corrosive media HF.

The purpose of this study is to extend the classical noncentral F-distribution under normal settings to noncentral closed skew F-distribution for dealing with independent samples from multivariate skew normal (SN) distributions.

Based on generalized Hotelling's T² statistics, confidence regions are constructed for the difference between location parameters in two independent multivariate SN distributions. Simulation studies show that the confidence regions based on the closed SN model outperform the classical multivariate normal model if the vectors of skewness parameters are not zero. A real data analysis is given for illustrating the effectiveness of our proposed methods.

This study’s approach is the first one in literature for the inferences in difference of location parameters under multivariate SN settings. Real data analysis shows the preference of this new approach than the classical method.

For the real data applications, the authors need to remove outliers first before applying this approach.

This study’s approach may apply many multivariate skewed data using SN fittings instead of classical normal fittings.

This paper is the research paper and the authors’ new approach has many applications for analyzing the multivariate skewed data.

This paper aim to take the ship shaft stern bearing as the research object, and studies the influence of journal axial vibration on bearing dynamic characteristics under different misaligned angles and rotation speeds.

Computational fluid dynamics (CFD) and harmonic excitation method were used to build bearing unstable lubrication model, and the dynamic mesh technology was used in calculation.

The results indicate that journal axial vibration has a significant effect on bearing dynamic characteristics, like maximum oil film pressure, bearing stiffness and damping coefficients, and the effect is positively correlated with journal misaligned angle. The effect of shaft rotation speed and journal axial vibration on bearing dynamics characteristics are independent; they have no coupling. Bearing axial stiffness is mainly affected by the journal axial displacement, bearing axial damping is mainly affected by journal axial velocity and they are positively correlated with the misaligned angle. The influence of rotational speed on bearing axial stiffness and axial damping is not obvious.

This paper establishes the bearing dynamic model by CFD and harmonic excitation method with consideration of cavitation effect and analyzing the influence of journal axial vibration on the dynamic characteristics. The results are benefit to the design of ship propulsion shaft and the selection of stern bearing. Also, they are of great significance to improve the operation stability of the shaft bearing system and the vitality of the ship.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-11-2022-0337/