Search results

The objective of this study was to develop wearable suit platforms with various anchoring structure designs with the intention of improving wearability and enhancing user satisfaction.

This study selected fabrics and materials for the suit platform through material performance tests. Two anchoring structure designs, 11-type and X-type are compared with regular clothing under control conditions. To evaluate the comfort level of the wearable suit platform, a satisfaction survey and electroencephalogram (EEG) measurements are conducted to triangulate the findings.

The 11-type exhibited higher values in comfort indicators such as α, θ, α/High-β and lower values in concentration or stress indicators such as β, ϒ, sensorimotor rhythm (SMR)+Mid-β/θ, and a spectral edge frequency of 95% compared to the X-type while walking. The 11-type offers greater comfort and satisfaction compared to the X-type when lifting based on the EEG measurements and the participants survey.

It is recommended to implement the 11-type when designing wearable suit platforms. These findings offer essential data on wearability, which can guide the development of soft wearable robots.

This study aims to analyze the importance and performance of customer-facing technologies in luxury hotels. The study also assessed differences between and within the four generations in the importance-performance analysis (IPA).

Data were collected using a Qualtrics panel of recent luxury hotel customers in the USA belonging to all four generations. The cross-generational IPA was conducted using t-tests and (ANAOVA).

The IPA matrix concentrated most technology items in either low importance – low performance or high importance – high performance quadrants. One-way ANOVA revealed significant differences between generations on the importance ratings of all technology items except wireless charging power solutions and on the performance ratings of all technology items. Furthermore, post hoc tests indicated that millennials rated luxury technology most favorably among the four cohorts, followed by generations Z, X and Baby Boomers. In addition, significant differences between the importance and performance of many technology items within each generational cohort were observed. Overall, Wi-Fi was unanimously ranked across generations as the most important technology among luxury guests, but it was the only one that scored lower in performance than importance.

The findings of this study contribute to hospitality scholarship in two primary ways: the importance and performance of technology and generational differences. The results advance the understanding of the impact of generational factors on customer-facing technological adoptions in the luxury hotel sector.

Technologies that are pervasive in the home also become vital offerings for hotels. The more pervasive technology, the more a luxury hotel must work to ensure that it performs at optimal levels. Additionally, which technologies are most important to targeted generations are provided so practitioners may budget for their implementation.

This research is a pivotal step forward in unraveling the intricate interplay between generational factors and technological evaluations, providing a foundation for future research and practical applications in a rapidly evolving technological landscape in the hospitality industry.

The purpose of this paper is to give an overview of artificial intelligence (AI) and other AI-enabled technologies and to describe how COVID-19 affects various industries such as health care, manufacturing, retail, food services, education, media and entertainment, banking and insurance, travel and tourism. Furthermore, the authors discuss the tactics in which information technology is used to implement business strategies to transform businesses and to incentivise the implementation of these technologies in current or future emergency situations.

The review provides the rapidly growing literature on the use of smart technology during the current COVID-19 pandemic.

The 127 empirical articles the authors have identified suggest that 39 forms of smart technologies have been used, ranging from artificial intelligence to computer vision technology. Eight different industries have been identified that are using these technologies, primarily food services and manufacturing. Further, the authors list 40 generalised types of activities that are involved including providing health services, data analysis and communication. To prevent the spread of illness, robots with artificial intelligence are being used to examine patients and give drugs to them. The online execution of teaching practices and simulators have replaced the classroom mode of teaching due to the epidemic. The AI-based Blue-dot algorithm aids in the detection of early warning indications. The AI model detects a patient in respiratory distress based on face detection, face recognition, facial action unit detection, expression recognition, posture, extremity movement analysis, visitation frequency detection, sound pressure detection and light level detection. The above and various other applications are listed throughout the paper.

Research is largely delimited to the area of COVID-19-related studies. Also, bias of selective assessment may be present. In Indian context, advanced technology is yet to be harnessed to its full extent. Also, educational system is yet to be upgraded to add these technologies potential benefits on wider basis.

First, leveraging of insights across various industry sectors to battle the global threat, and smart technology is one of the key takeaways in this field. Second, an integrated framework is recommended for policy making in this area. Lastly, the authors recommend that an internet-based repository should be developed, keeping all the ideas, databases, best practices, dashboard and real-time statistical data.

As the COVID-19 is a relatively recent phenomenon, such a comprehensive review does not exist in the extant literature to the best of the authors’ knowledge. The review is rapidly emerging literature on smart technology use during the current COVID-19 pandemic.

At the moment, in terms of both research and commercial products, smart shoe technology and applications seem not to attract the same magnitude of attention compared to smart garments and other smart wearables such as wrist watches and wrist bands. The purpose of this study is to fill this knowledge gap by discussing issues regarding smart shoe sensing technologies, smart shoe sensor placements, factors that affect sensor placements and finally the areas of smart shoe applications.

Through a review of relevant literature, this study first and foremost attempts to explain what constitutes a smart shoe and subsequently discusses the current trends in smart shoe applications. Discussed in this study are relevant sensing technologies, sensor placement and areas of smart shoe applications.

This study outlined 13 important areas of smart shoe applications. It also uncovered that majority of smart shoe functionality are physical activity tracking, health rehabilitation and ambulation assistance for the blind. Also highlighted in this review are some of the bottlenecks of smart shoe development.

To the best of the authors’ knowledge, this is the first comprehensive review paper focused on smart shoe applications, and therefore serves as an apt reference for researchers within the field of smart footwear.

Devices for step estimation are body-worn devices used to compute steps taken and/or distance covered by the user. Even though textiles or clothing are foremost to come to mind in terms of articles meant to be worn, their prominence among devices and systems meant for cadence is overshadowed by electronic products such as accelerometers, wristbands and smart phones. Athletes and sports enthusiasts using knee sleeves should be able to track their performances and monitor workout progress without the need to carry other devices with no direct sport utility, such as wristbands and wearable accelerometers. The purpose of this study thus is to contribute to the broad area of wearable devices for cadence application by developing a cheap but effective and efficient stride measurement system based on a knee sleeve.

A textile strain sensor is designed by weft knitting silver-plated nylon yarn together with nylon DTY and covered elastic yarn using a 1 × 1 rib structure. The area occupied by the silver-plated yarn within the structure served as the strain sensor. It worked such that, upon being subjected to stress, the electrical resistance of the sensor increases and in turn, is restored when the stress is removed. The strip with the sensor is knitted separately and subsequently sewn to the knee sleeve. The knee sleeve is then connected to a custom-made signal acquisition and processing system. A volunteer was employed for a wearer trial.

Experimental results establish that the number of strides taken by the wearer can easily be correlated to the knee flexion and extension cycles of the wearer. The number of peaks computed by the signal acquisition and processing system is therefore counted to represent stride per minute. Therefore, the sensor is able to effectively count the number of strides taken by the user per minute. The coefficient of variation of over-ground test results yielded 0.03%, and stair climbing also obtained 0.14%, an indication of very high sensor repeatability.

The study was conducted using limited number of volunteers for the wearer trials.

By embedding textile piezoresistive sensors in some specific garments and or accessories, physical activity such as gait and its related data can be effectively measured.

To the best of our knowledge, this is the first application of piezoresistive sensing in the knee sleeve for stride estimation. Also, this study establishes that it is possible to attach (sew) already-knit textile strain sensors to apparel to effectuate smart functionality.

This paper explores the Adoption of Technological Innovation (ATI) in the healthcare industry. It investigates how the literature has evolved, and what are the emerging innovation dimensions in the healthcare industry adoption studies.

We followed a mixed-method approach combining bibliometric methods and topic modeling, with 57 papers being deeply analyzed.

Our results identify three latent topics. The first one is related to the digitalization in healthcare with a specific focus on the COVID-19 pandemic. The second one groups up the word combinations dealing with the research models and their constructs. The third one refers to the healthcare systems/professionals and their resistance to ATI.

The study’s sample selection focused on scientific journals included in the Academic Journal Guide and in the FT Research Rank. However, the paper identifies trends that offer managerial insights for stakeholders in the healthcare industry.

ATI has the potential to revolutionize the health service delivery system and to decentralize services traditionally provided in hospitals or medical centers. All this would contribute to a reduction in waiting lists and the provision of proximity services.

The originality of the paper lies in the combination of two methods: bibliometric analysis and topic modeling. This approach allowed us to understand the ATI evolutions in the healthcare industry.

In recent years, there has been significant interest in adopting XR (extended reality) technologies such as VR (virtual reality) and AR (augmented reality), particularly in retail. However, extending activities through reality-mediation is still mostly believed to offer an inferior experience due to their shortcomings in usability, wearability, graphical fidelity, etc. This study aims to address the research gap by experimentally examining the acceptance of metaverse shopping.

This study conducts a 2 (VR: with vs. without) × 2 (AR: with vs. without) between-subjects laboratory experiment involving 157 participants in simulated daily shopping environments. This study builds a physical brick-and-mortar store at the campus and stocked it with approximately 600 products with accompanying product information and pricing. The XR devices and a 3D laser scanner were used in constructing the three XR shopping conditions.

Results indicate that XR can offer an experience comparable to, or even surpassing, traditional shopping in terms of its instrumental and hedonic aspects, regardless of a slightly reduced perception of usability. AR negatively affected perceived ease of use, while VR significantly increased perceived enjoyment. It is surprising that the lower perceived ease of use appeared to be disconnected from the attitude toward metaverse shopping.

This study provides important experimental evidence on the acceptance of XR shopping, and the finding that low perceived ease of use may not always be detrimental adds to the theory of technology adoption as a whole. Additionally, it provides an important reference point for future randomized controlled studies exploring the effects of technology on adoption.

Demonstrate proof-of-concept for conducting NFL Draft trades on a blockchain network using smart contracts.

Using Ethereum smart contracts, the authors model several types of draft trades between teams. An example scenario is used to demonstrate contract interaction and draft results.

The authors show the feasibility of conducting draft-day trades using smart contracts. The entire negotiation process, including side deals, can be conducted digitally.

Further work is required to incorporate the full-scale depth required to integrate the draft trading process into a decentralized user platform and experience.

Cutting time for the trade negotiation process buys decision time for team decision-makers. Gains are also made with accuracy and cost.

Full-scale adoption may find resistance due to the level of fan involvement; the draft has evolved into an interactive experience for both fans and teams.

This research demonstrates the new application of smart contracts in the inter-section of sports management and blockchain technology.

This study aims to examine the factors influencing consumers’ intentions to use QR code menus in the post-COVID-19 pandemic using the unified theory of acceptance and use of technology and rational choice theory as the theoretical foundations.

Using a survey method, 200 data are collected from consumers who had used QR code menus in the past. Partial least squares structural equation modelling is used to analyse the data.

Our findings show that performance expectancy, effort expectancy, social influence, habit and perceived privacy protection have a significant positive influence on intentions. However, facilitating conditions, hedonic motivation and perceived privacy risk do not have a significant influence on intentions.

This study further extends the work of previous studies by using the unified theory of acceptance and use of technology model, with additional two new predictors, namely perceived privacy protection and perceived privacy risk, to understand consumers’ intentions to use QR code menus.

One of the most marginalized communities in India is the Lesbian, Gay, Bisexual and Transgender (LGBT) community which commonly experiences discrimination. Many studies have countered that the LGBT community faces high discrimination in the banking and financing industry. As a result, this study concentrates on this marginalized community and its acceptance and continuation habit regarding mobile wallets. Consequently, this study has considered continuance intentions as a response to confirm the progress of the mobile-wallet industry. Also, this study tried to study the relationship between behavioral intention (BI) and continuous intention (CI) which is seriously lacks in the library of literature. The research operationalized the stimulus–organism–response (SOR) framework for the conceptual model and surveyed 100 self-proclaimed members of the LGBT community in India. The analysis has been done using the partial least structure (PLS). The findings demonstrate that variables like perceived trust (PT) directly influence the BI. On the other hand, variables like perceived ease of use (PEoU), social influence (SI), and satisfaction (S) doesn’t influence BI of the LGBT Community. The main outcome was a favorable association between BI and CI. It will help the stakeholders to understand how important this new market avenue is and how it can be explored. To ensure safe and secure transactions, a group think tank composed of important parties (financial institutions, mobile-wallet providers, the government, security specialists, etc.) should make recommendations. Mobile-wallet providers will attain benefit from this study’s understanding of user categories and ability to tailor their service offers as per the community.