Search results

Perspiration and heat are produced by the body and must be eliminated to maintain a stable body temperature. Sweat, heat and air must pass through the fabric to be comfortable. The cloth absorbs sweat and then releases it, allowing the body to chill down. By capillary action, moisture is driven away from fabric pores or sucked out of yarns. Convectional air movement improves sweat drainage, which may aid in body temperature reduction. Clothing reduces the skin's ability to transport heat and moisture to the outside. Excessive moisture makes clothing stick to the skin, whereas excessive heat induces heat stress, making the user uncomfortable. Wet heat loss is significantly more difficult to understand than dry heat loss. The purpose of this study is to provided a good compilation of complete information on wet thermal comfort of textile and technological elements to be consider while constructing protective apparel.

This paper aims to critically review studies on the thermal comfort of textiles in wet conditions and assess the results to guide future research.

Several recent studies focused on wet textiles' impact on comfort. Moisture reduces the fabric's thermal insulation value while also altering its moisture characteristics. Moisture and heat conductivity were linked. Sweat and other factors impact fabric comfort. So, while evaluating a fabric's comfort, consider both external and inside moisture.

The systematic literature review in this research focuses on wet thermal comfort and technological elements to consider while constructing protective apparel.

The purpose of this study was to improve the overall equipment effectiveness (OEE) of the production process of the shredder operation of ABC company, an industrial waste management company which supplies pre-processed industrial waste as alternative fuel to a cement plant.

This case study investigated all possible availability and performance losses that caused the shredder system’s OEE and various problem-solving techniques, such as root cause analysis and Pareto analysis, were used to find the root cause of the reduced OEE.

After analysing this case study, three significant loss factors were identified from all the availability and performance losses, which caused the shredder system’s OEE losses. Practical solutions were found for the effect of those loss factors to improve the machine’s OEE and productivity.

This case study has been concentrated on only analysing of losses and improvement of OEE in the production process and not about cost analysis between loss and improvements.

This paper shows how to improve the OEE of a production process through various problem-solving techniques by identifying its losses and how to achieve the best solutions for those losses in a practical manner.

The COVID-19 pandemic has caused severe challenges to ethnic minorities in the UK. While the experiences of migrants are both complex and varied depending on individuals' social class, race, cultural proximity to the host country and acculturation levels, more in-depth studies are necessary to fully understand how COVID-19 affects specific migrant groups and their health. Taiwanese migrants were selected because they are an understudied group. Also, there were widespread differences in pandemic management between the UK and Taiwan, making this group an ideal case for understanding how their acculturation journey can be disrupted by a crisis.

Qualitative data were collected at two different time points, at the start of the UK pandemic (March/April 2020) and six months on (October/November 2020), to explore migrant coping experiences over time. Theoretically, the authors apply acculturation theory through the lens of coping, while discussing health-consumption practices, as empirical evidence.

Before the outbreak of the pandemic, participants worked hard to achieve high levels of integration in the UK. The pandemic changed this; participants faced unexpected changes in the UK’s sociocultural structures. They were forced to exercise the layered and complex “coping with coping” in a hostile host environment that signalled their new marginalised status. They faced impossible choices, from catching a life-threatening disease to being seen as overly cautious. Such experience, over time, challenged their integration to the host country, resulting in a loss of faith in the UK’s health system, consequently increasing separation from the host culture and society.

It is important to note that the Taiwanese sample recruited through Facebook community groups is biased and has a high level of homogeneity. These participants were well-integrated, middle-class migrants who were highly educated, relatively resourceful and active on social media. More studies are needed to fully understand the impact on well-being and acculturation of migrants from different cultural, contextual and social backgrounds. This being the case, the authors can speculate that migrants with less resource are likely to have found the pandemic experience even more challenging. More studies are needed to fully understand migrant experience from different backgrounds.

Public health policymakers are advised to dedicate more resources to understand migrants' experiences in the host country. In particular, this paper has shown how separation, especially if embraced temporarily, is not necessarily a negative outcome to be corrected with specific policies. It can be strategically adopted by migrants as a way of defending their health and well-being from an increasingly hostile environment. Migrants' home country experience provides vicarious learning opportunities to acquire good practices. Their voices should be encouraged rather than in favour of a surprising orthodox and rather singular approach in the discussion of public health management.

The paper has clear public health policy implications. Firstly, public health policymakers are advised to dedicate more resources to understand migrants' experiences in the host country. Acknowledging migrants' voice is a critical first step to contribute to the development of a fair and inclusive society. Secondly, to retain skilful migrants and avoid a future brain-drain, policymakers are advised to advance existing infrastructure to provide more incentives to support and retain migrant talents in the post-pandemic recovery phase.

This paper reveals how a group of previously well-integrated migrants had to exercise “coping with coping” during the COVID crisis. This experience, over time, challenged their integration to the host country, resulting in a loss of faith in the UK’s health system, consequently increasing separation from the host culture and society. It contributes to the understanding of acculturation by showing how a such crisis can significantly disrupt migrants' acculturation journey, challenging them to re-acculturate and reconsider their identity stance. It shows how separation was indeed a good option for migrants for protecting their well-being from a newly hostile host environment.

Static inverters are very important for the emergency energy distribution system of aircraft and similar machines. At the same time, the electrical energy produced at high frequency for electrical devices is used to reduce the weight of the cables in the aircraft and spacecraft because of the skin effect. In the high-frequency system, a thinner cable cross-section is used, and a great weight reduction occurs in the aircraft. So, fuel economy, less and late wear of the materials (landing gear, etc.) can be obtained with decreasing weight. This paper aims to present the development of a functional multilevel inverter (FMLI) with fractional sinus pulse width modulation (FSPWM) and a reduced number of switches to provide high-frequency and quality electrical energy conversion.

After the production of FSPWM for FMLI with a reduced component, which, to the best of the authors’ knowledge, is presented for the first time in this study, is explained step by step, and eight operating states are given according to different FSPWMs operating the circuit. The designed inverter and modulation technique are compared by testing the conventional modular multilevel inverter on different loads.

According to application results, it is seen that there is a 50% reduction in cross-section from 100 Hz to 400 Hz with the skin effect. At 1000 Hz, there is a 90% cross-section reduction. The decrease can be in cable weights that may occur in aircraft from 10 kg to 100 kg according to different frequencies. It causes less harmonic distortion than conventional converters. This supports the safer operation of the system. Compared to the traditional system, the proposed system provides more amplitude in converting the source to alternating voltage and increases the efficiency.

FSPWM is developed for multilevel inverters with reduced components at the high frequency and cascaded switching studies in the power electronics of aircraft.

Although the proposed system has less current and power loss as mentioned in the previous sections, it contains fewer power elements than conventional inverters that are equivalent for different hardware levels. This not only reduces the cost of the system but also provides ease of maintenance. To reduce the cable load in aircraft and create more efficient working conditions, 400 Hz alternative voltage is used. The proposed system causes less losses and lower harmonic distortions than traditional systems. This will reduce possible malfunctions and contribute to aircraft reliability for passengers and cargo. As technology develops, it is revealed that the proposed inverter system will be more efficient than traditional inverters when devices operating at frequencies higher than 400 Hz are used. With the proposed inverter, safer operation will be ensured, while there will be less energy loss, less fuel consumption and less carbon emissions to the environment.

The proposed inverter structure shows that it can provide energy transmission for electrical devices in space and aircraft by using the skin effect. It also contains less power elements than the traditional inverters, which are equivalent for different levels of hardware.

The impact of rolling on the performance of micro arc oxidation (MAO) coatings on ZM5 alloy has been underreported. The purpose of this study is to explore the correlation between rolling and the failure mechanism of MAO coatings in greater depth.

The influence of rolling on the corrosion and wear properties of MAO coating was investigated by phase structure, bond strength test (initial bond strength and wet adhesion), electrochemical impedance spectroscopy and wear test. The change of the surface electrochemical properties was studied by first principles analysis.

The results showed that the MAO coating on rolled alloy had better corrosion and wear resistance compared to cast alloy, although the structure and component content of two kinds of MAO coating are nearly identical. The difference in interface bonding between MAO coating and Mg substrate is the primary factor contributing to the disparity in performance between the two types of samples. Finally, the impact of the rolling process on MAO coating properties is explained through first-principle calculation.

A comprehensive explanation of the impact of the rolling process on MAO coating properties will provide substantial support for enhancing the application of Mg alloy anticorrosion.

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

The objective of this study was to develop wearable suit platforms with various anchoring structure designs with the intention of improving wearability and enhancing user satisfaction.

This study selected fabrics and materials for the suit platform through material performance tests. Two anchoring structure designs, 11-type and X-type are compared with regular clothing under control conditions. To evaluate the comfort level of the wearable suit platform, a satisfaction survey and electroencephalogram (EEG) measurements are conducted to triangulate the findings.

The 11-type exhibited higher values in comfort indicators such as α, θ, α/High-β and lower values in concentration or stress indicators such as β, ϒ, sensorimotor rhythm (SMR)+Mid-β/θ, and a spectral edge frequency of 95% compared to the X-type while walking. The 11-type offers greater comfort and satisfaction compared to the X-type when lifting based on the EEG measurements and the participants survey.

It is recommended to implement the 11-type when designing wearable suit platforms. These findings offer essential data on wearability, which can guide the development of soft wearable robots.

This study aimed to assess the influence of the community-based campaign on weight loss and healthy lifestyle adoption among Bahrain's adult population.

A cross -sectional self-reported online questionnaire completed in February 2021. The survey evaluated the impact of the community-based campaign health program which includes (exercise, diet plan and psychological eating behavior) weight reduction using social media platforms. The authors employed data from young and middle-aged healthy adults (n = 842) between the ages of 18-55 years, of both sexes. The intervention group (n = 842) was made up of the supporters of the voluntary community initiative called Obesity does not Suit Me (n = 194), and the control group (n = 648) was made up of non-followers of the campaign.

The study showed a statistically significant difference among the followers of the community-based campaign health program in the following parameters: 3.90-4.23 kg less, 1.46-1.59 difference in BMI and 0.05-0.06 WHR. All changes were of low effect size.

Diet and exercise had significant impact on weight, BMI and WHR among the followers of the community campaign. However, more research is required for sponsorship to increase the motivation and rewards for the community campaign.

This study aims to use the dual-continuum model of mental health to explore mental health in Australian construction apprentices from the perspective of key stakeholders in the apprenticeship model. In particular, this study explored how construction apprentices, Vocational Education and Training (VET) teachers, industry employers and mental health workers understood the construct of mental health, factors associated with the dimension of psychological distress/symptoms of mental illness, and factors associated with the dimension of mental wellbeing.

This study used an exploratory qualitative research design. Data from 36 semi-structured interviews were analysed using thematic analysis. Participants comprised 19 Australian construction apprentices, 5 VET teachers, 7 industry employers and 5 mental health workers.

In total, 14 themes were generated from the data set. Participants across stakeholder groups reported a limited understanding about mental health. Participants cited a range of negative personal, workplace and industry factors associated with psychological distress/symptoms of mental illness, but only reported a few factors associated with mental wellbeing.

To the best of the authors’ knowledge, this study is one of the first to use the dual-continuum model of mental health to explore the mental health of Australian construction apprentices, and to explore the factors associated with both dimensions of this model from the perspective of key stakeholders in the Australian construction apprenticeship model.

A positive outlook on the impact of Industry 4.0 (I4.0) on sustainability prevails in the literature. However, some studies have highlighted potential areas of concern that have not yet been systematically addressed. The goal of this study is to challenge the assumption of a sustainable Fourth Industrial Revolution by (1) identifying the possible unintended negative impacts of I4.0 technologies on sustainability; (2) highlighting the underlying motivations and potential actions to mitigate such impacts; and (3) developing and evaluating alternative assumptions on the impacts of I4.0 technologies on sustainability.

Building on a problematization approach, a systematic literature review was conducted to develop potential alternative assumptions about the negative impacts of I4.0 on sustainability. Then, a Delphi study was carried out with 43 experts from academia and practice to evaluate the alternative assumptions. Two rounds of data collection were performed until reaching the convergence or stability of the responses.

The results highlight various unintended negative effects on environmental and social aspects that challenge the literature. The reasons behind the high/low probability of occurrence, the severity of each impact in the next five years and corrective actions are also identified. Unintended negative environmental effects are less controversial than social effects and are therefore more likely to generate widely accepted theoretical propositions. Finally, the alternative hypothesis ground is partially accepted by the panel, indicating that the problematization process has effectively opened up new perspectives for analysis.

This study is one of the few to systematically problematize the assumptions of the I4.0 and sustainability literature, generating research propositions that reveal several avenues for future research.