Search results

The rock drill’s drill tail experiences high-frequency fretting simultaneously in the rotational and axial directions. Due to the complex working characteristics and the low viscosity of the water medium, the pure water seal is susceptible to damage and failure. The purpose of this paper is to enhance the water seal’s performance.

The Y-shaped seal ring is modeled and simulated using orthogonal testing. Through analysis of the impact of various seal section parameters on sealing performance, the maximum contact stress and maximum Von Mises stress are selected as indicators of sealing effectiveness.

The maximum contact stress is proportional to lip thickness and chamfer length but inversely proportional to lip length. Meanwhile, the maximum Von Mises stress is directly influenced by lip depth and the included angle of the lip and drill tail but is inversely proportional to the lip thickness. The enhanced Y-shaped water seal sees reductions of 15% and 45% in maximum contact stress and maximum Von Mises stress, respectively.

This paper used analytical method and model that is helpful for design of the water seal’s structure in complex working characteristics and the low viscosity of the water medium.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-11-2023-0366/

Polyurethane (PUR) foam parts are traditionally manufactured using metallic molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable molds using fused filament fabrication (FFF) with polylactic acid (PLA) and glycol-modified polyethylene terephthalate (PETG) is proposed as an economical, simpler and faster solution compared to traditional metallic molds or three-dimensional (3D) printing with other difficult-to-print thermoplastics, which are prone to shrinkage and delamination (acrylonitrile butadiene styrene, polypropilene-PP) or high-cost due to both material and printing equipment expenses (PEEK, polyamides or polycarbonate-PC). The purpose of this study has been to evaluate the ease of release of PUR foam on these materials in combination with release agents to facilitate the mulding/demoulding process.

PETG, PLA and hardenable polylactic acid (PLA 3D870) have been evaluated as mold materials in combination with aqueous and solvent-based release agents within a full design of experiments by three consecutive molding/demolding cycles.

PLA 3D870 has shown the best demoldability. A mold expressly designed to manufacture a foam cushion has been printed and the prototyping has been successfully achieved. The demolding of the part has been easier using a solvent-based release agent, meanwhile the quality has been better when using a water-based one.

The combination of PLA 3D870 and FFF, along with solvent-free water-based release agents, presents a compelling low-cost and eco-friendly alternative to traditional metallic molds and other 3D printing thermoplastics. This innovative approach serves as a viable option for rapid tooling in PUR foam molding.

Pre-eclampsia and eclampsia (PE/E) are rising in Sub-Saharan Africa, including Nigeria. This study aims to evaluate the availability and logistics management of sixteen items from the Nigerian essential medicine list required for managing these conditions.

A cross-sectional study in 50 health-care facilities in Lagos State, Nigeria, at the beginning of the COVID-19 pandemic by interviewing the facility’s main person in charge of health commodities. Data were recorded during the visit and in the previous six months using the adapted Logistics Indicators Assessment Tool (LIAT). In addition, descriptive analysis was conducted based on the World Health Organization availability index.

The availability of 13 (81%) of the commodities were high, and 3 (19%) were relatively high in the facilities, stock out rate during the visitation and previous six months varied with the commodities: urinalysis strip (22%) and (40%), hydralazine (20%) and (20%), labetalol injection (8%) and (20%), labetalol tablet (24%) and (24%) and sphygmomanometer (8%) and (8%). No stock out was recorded for 11 (69%) commodities. All the facilities observed 9 (75%) out of the 12 storage guidelines, and 36 (72%) had a perfect storage condition score.

Current state of PE/E health commodities in the selected facilities is highlighted, and the strengths and weaknesses of the supply chain in these health facilities were identified and discussed.

These commodities’ availability ranged from reasonably high to very high. Regular supportive supervision is germane to strengthening the logistics management system for these commodities to prevent the negative impact on the health and well-being of the people during the COVID-19 pandemic and post-pandemic.

The purpose of this study is to investigate the impact of the construction and operation of underground gas storage (UGS) facilities, under the prism of the recent rise in energy prices. The focus is on developing energy markets interconnected with gas producers through pipelines and has access to liquefied natural gas (LNG) facilities in parallel.

Through a focal market in Europe, the authors estimate the economic value for both stakeholders and consumers by introducing a methodology, appropriately adjusted to the specificities of the domestic energy market. The Transmission System Operator, the Energy Market Regulator, the Energy Exchange and Eurostat are the main data sources for our calculations and conclusions.

The authors investigate the perspectives of UGS facilities, identifying financial challenges considering specific energy market conditions which are barriers to new storage facilities. Nevertheless, the energy price rocketing coupled with the security of gas supply issues, which arose in autumn 2021 and were continuing in 2022 due to the Russia–Ukraine crisis, highlight that gas storage remains, at least for the midterm, at the core of European priorities.

The paper emphasizes on developing markets toward green transition, proposing tangible policy recommendations regarding gas storage. A new methodological approach is proposed, appropriate to quantify the economic value of UGSs in such markets. Last, a mix of energy policy options is suggested which include regulatory reforms, support schemes and new energy infrastructures that could make the gas storage investments economically viable.

This study aims to delve into the coupled mixed convective heat transport process within a grooved channel cavity using CuO-water nanofluid and an inclined magnetic field. The cavity undergoes isothermal heating from the bottom, with variations in the positions of heated walls across the grooved channel. The aim is to assess the impact of heater positions on thermal performance and identify the most effective configuration.

Numerical solutions to the evolved transport equations are obtained using a finite volume method-based indigenous solver. The dimensionless parameters of Reynolds number (1 ≤ Re ≤ 500), Richardson number (0.1 ≤ Ri ≤ 100), Hartmann number (0 ≤ Ha ≤ 70) and magnetic field inclination angle (0° ≤ γ ≤ 180°) are considered. The solved variables generate both local and global variables after discretization using the semi-implicit method for pressure linked equations algorithm on nonuniform grids.

The study reveals that optimal heat transfer occurs when the heater is positioned at the right corner of the grooved cavity. Heat transfer augmentation ranges from 0.5% to 168.53% for Re = 50 to 300 compared to the bottom-heated case. The magnetic field’s orientation significantly influences the average heat transfer, initially rising and then declining with increasing inclination angle. Overall, this analysis underscores the effectiveness of heater positions in achieving superior thermal performance in a grooved channel cavity.

This concept can be extended to explore enhanced thermal performance under various thermal boundary conditions, considering wall curvature effects, different geometry orientations and the presence of porous structures, either numerically or experimentally.

The findings are applicable across diverse fields, including biomedical systems, heat exchanging devices, electronic cooling systems, food processing, drying processes, crystallization, mixing processes and beyond.

This work provides a novel exploration of CuO-water nanofluid flow in mixed convection within a grooved channel cavity under the influence of an inclined magnetic field. The influence of different heater positions on thermomagnetic convection in such a cavity has not been extensively investigated before, contributing to the originality and value of this research.

The purpose of this study is to analyze the impact of inclined magnetohydrodynamics (MHD) and thermal radiation on the flow of a ternary micropolar nanofluid on a sheet that is expanding and contracting while applying mass transpiration and velocity slip conditions to the flow. The nanofluid, which is composed of Au, Ag and Cu nanoparticles dispersed in water as the base fluid, possesses critical properties for increasing the heat transfer rate and is frequently used in manufacturing and industrial establishments.

The set of governing nonlinear partial differential equations is transformed into a set of nonlinear ordinary differential equations. The outcome of this differential equation is solved and obtained the closed-form solution and energy equation in the form of hypergeometric functions.

The velocity, micro-rotation and temperature field are investigated versus a parametric variation. The physical domains of mass suction or injection and micropolar characteristics play an important role in specifying the presence, singleness and multiplanes of exact solutions. In addition, many nondimensional characteristics of the profiles of temperature, angular velocity and velocity profiles are graphically shown with substantial consequences. Furthermore, adding nanoparticles increases the heat transfer rate of the fluid used in manufacturing and industrial establishments. The current findings may be used for better oil recovery procedures, smart materials such as magnetorheological fluids, targeted medicine administration and increased heat transmission. Concerning environmental cleanup, nanomaterial fabrication and biomedical devices, demonstrate their potential influence in a variety of disciplines.

The originality of this paper is to analyze the impact of inclined MHD at an angle with the ternary nanofluid on a micropolar fluid over an expanding and contracting sheet with thermal radiation effect.

This study aims to enhance merging of additive manufacturing (AM) techniques with powder injection molding (PIM). In this way, the prototypes could be 3D-printed and mass production implemented using PIM. Thus, the surface properties and mechanical performance of parts produced using powder/polymer binder feedstocks [material extrusion (MEX) and PIM] were investigated and compared with powder manufacturing based on direct metal laser sintering (DMLS).

PIM parts were manufactured from 17-4PH stainless steel PIM-quality powder and powder intended for powder bed fusion compounded with a recently developed environmentally benign binder. Rheological data obtained at the relevant temperatures were used to set up the process parameters of injection molding. The tensile and yield strengths as well as the strain at break were determined for PIM sintered parts and compared to those produced using MEX and DMLS. Surface properties were evaluated through a 3D scanner and analyzed with advanced statistical tools.

Advanced statistical analyses of the surface properties showed the proximity between the surfaces created via PIM and MEX. The tensile and yield strengths, as well as the strain at break, suggested that DMLS provides sintered samples with the highest strength and ductility; however, PIM parts made from environmentally benign feedstock may successfully compete with this manufacturing route.

This study addresses the issues connected to the merging of two environmentally efficient processing routes. The literature survey included has shown that there is so far no study comparing AM and PIM techniques systematically on the fixed part shape and dimensions using advanced statistical tools to derive the proximity of the investigated processing routes.

Pakistan ranks third globally in terms of newborn deaths occuring within the first 24 hours of life. With a neonatal mortality rate of 42.0%, it carries the highest burden compared to neighboring countries such as Bangladesh (17%), India (22.7%) and Afghanistan (37%). While there has been a decline in neonatal mortality rates in Pakistan, the pace of this decline is slower than that of other countries in the region. Hence, it is crucial to conduct a comprehensive examination of the risk factors contributing to neonatal mortality in Pakistan over an extended period. This study aims to analyze the trends and determinants of neonatal mortality in Pakistan over three decades, providing valuable insights into this persistent issue.

The study focused on neonatal mortality as the response variable, which is defined as the death of a live-born child within 28 days of birth. Neonates who passed away during this period were categorized as “cases,” while those who survived beyond a specific timeframe were referred to as “noncases.” To conduct a pooled analysis of neonatal mortality, birth records of 39,976 children born in the five years preceding the survey were extracted from four waves (1990–2018) of the Pakistan Demographic and Household Survey. The relationship between risk factors and the response variable was examined using the Cox Proportional Hazard Model. Neonatal mortality rates were calculated through the direct method using the “syncmrates” package in Stata 15.

During the extended period in Pakistan, several critical protective factors against neonatal mortality were identified, including a large family size, improved toilet facilities, middle-aged and educated mothers, female children, singleton live births, large size at birth and longer birth intervals. These factors were found to reduce the risk of neonatal mortality significantly.

This study makes the first attempt to analyze the trends and patterns of potential risk factors associated with neonatal mortality in Pakistan. By examining a large dataset spanning several years, the study provides valuable insights into the factors influencing neonatal mortality.

The peer review history for this article is available at: https://publons.com/publon/10.1108/IJSE-09-2022-0604

The purpose of this study is to advance turbulent thermal convection inside the constant heat-flux round tube inserted by multiple perforated twisted tapes.

The novel design of this study is accomplished by inserting several twisted tapes and drilling some circular perforations near the tape edge (C1, C3, C5: solid tapes; C2, C4, C6: perforated tapes). The turbulence flow appearances and thermal convective features are examined for various Reynolds numbers (8,000–14,000) using the renormalization group (RNG) κ−ε turbulent model and Semi-Implicit Method for Pressure-Linked Equations (SIMPLE) algorithm.

The simulated outcomes reveal that inserting more perforated-twisted tapes into the heated round tube promotes turbulent thermal convection effectively. A swirling flow caused by the twisted tapes to produce the secondary flow jets between two reverse-spin tapes can combine with the main flow passing through the perforations at the outer edge to enhance the vortex flow. The primary factors are the quantity of twisted tapes and with/without perforations, as the perforation ratio remains at 2.5 in this numerical work. Weighing friction along the tube, C6 (four reverse-spin perforated-twisted tapes) brings the uppermost thermal-hydraulic performance of 1.23 under Re = 8,000.

The constant thermo-hydraulic attributes of liquid water and the steady Newtonian fluid are research limitations for this simulated work.

The simulated outcomes will avail the inner-pipe design of a heat exchanger inserted by multiple perforated twisted tapes to enhance superior heat transfer.

These twisted tapes form tiny circular perforations along the tape edge to introduce the fluid flow through these bores and combine with the secondary flow induced between two reverse-spin tapes. This scheme enhances the swirling flow, turbulence intensity and fluid mixing to advance thermal convection since larger perforations cannot produce large jet velocity or the position of perforations is too far from the tape edge to generate a separated flow. Consequently, this work contributes a valuable cooling mechanism toward thermal engineering.

The purpose of this study is to determine the material extrusion (MEX) printability envelope of a new kind of low-viscosity powder-binder feedstocks using rheological properties.

Formulation of 13 feedstocks (variation of solid loading 60–67 Vol.% and thickening agent proportion 3–15 Vol.%) that were characterized and printed at different temperatures.

Three rheological models were successfully used to define the viscosity envelope, producing stable and defect-free printing. At a shear deformation rate experienced by the feedstock in the nozzle ranging from 100 to 300 s^–1, it was confirmed that metal injection molding (MIM) feedstocks exhibiting a low viscosity between 100 and 150 Pa s could be printed using an extrusion temperature as low as 85 °C.

MEX can be used in synergy with MIM to accelerate mold development for a new injected part or simply as a replacement for MIM when the cost of the mold becomes too high for very small production volumes.

Correlation between the rheological properties of this new generation of low-viscosity feedstocks and MEX printability has been demonstrated for the first time.