Search results

This study aims to examine the impact of socioeconomic factors on electricity usage and assess the feasibility of implementing a mini-grid system in Kasangazi, Malawi. The primary aim is to understand the community’s current and potential utilisation of electrical equipment.

A mixed-methods approach was used to collect quantitative and qualitative data. Information was gathered through structured questionnaires, and energy audits were conducted among 87 randomly selected households from 28 Kasangazi communities. Data analysis relied on descriptive statistics using IBM SPSS version 28.

The study indicates that every household in Kasangazi uses non-renewable energy sources: 60 households use disposable batteries for lighting, 20 for radios and all use firewood, freely sourced from local forests, for cooking and heating water. The study shows that firewood is the community’s preferred energy source, illustrating the challenges faced in the fight against deforestation. Most household income comes from farming, with smaller contributions from businesses, employment and family remittances. Access to higher education is scarce, with only one out of 349 family members receiving tertiary education. Despite the constraints of low education levels and income, there is a demand for larger electrical appliances such as stoves and refrigerators. This underscores the need for mini-grid solutions, even in less technologically advanced, agriculture-dependent communities.

This study underscores that in Sub-Saharan Africa, factors like household size, income and education levels do not significantly influence the electricity demand but should be taken as part of the fundamental human rights. Rural populations express a desire for electricity due to the convenience it offers, particularly for appliances like refrigerators and stoves. Mini-grids emerge as a viable alternative in regions where grid electricity provision is challenging. It is concluded from this paper that the issue of using renewable energy should not only be taken for environmental preservation but also to promote energy access, augmenting efforts in supplying electricity to the remotest parts of the country.

The use of energy efficient cookstoves (EECS) has been promoted for a long and considered as instrumental in the efforts to mitigate the multiple social, economic and environmental consequences of traditional biomass cookstoves. Despite this, the adoption of EECS in pre-urban and rural Ethiopia is still very low. In response to this, the government of Ethiopia, in collaboration with international development organizations, implemented numerous initiatives aimed at improving the availability and use of EECS as part of the effort to support sustainable development. However, very little is known about the impact of the introduced EECS on improving the welfare of women. The purpose of this study is, therefore, to assess the impact of improved cookstoves projects on the welfare of women in Yaya Gullele district, Ethiopia.

A mixed research design was adopted to conduct the study. The quantitative data for the study were collected using a structured questionnaire by interviewing 388 randomly selected respondents. The data were analysed using both descriptive and inferential data analysis techniques, including the propensity score matching model using STATA.

Results of the study revealed that adoption of EECS has reduced fuel wood expense (124.65 Ethiopian Birr [ETB]/week), reduced five-year stove expense (404.67 ETB) and increased regular savings (116.58 ETB/month), which contributed for an increased annual income of participants (5,594.42 ETB). The result of the study also indicated that the use of EECS enabled the beneficiary women to reduce the amount of fuel wood use by 29.4 kg/week, which in turn reduced forest degradation and emission by 2.34 tons of CO₂e/year/household. Besides, it reduced the drudgery on women in terms of reduced time to cook (53 min/day), reduced time to collect fuelwood and prepare food (3.95 h/week) and reduced frequency of fuelwood collection trips (3.42 trips/week). The study results, in general, indicated that the adoption of EECS improved the welfare of women in the study area, where the majority of women have been suffering from the burden of using traditional stoves and associated impacts for a long.

Energy is central to most of the development-related challenges and opportunities every country faces today. The result of the study implied that policies and strategies intended at improving the availability and use of EECS as part of the effort to support sustainable development need to consider integrating such context-referenced, locally manageable and affordable EECS into the clean developmental strategies of the country.

Insights from this study can support development practitioners and policymakers to make informed decisions regarding future interventions in the use of energy efficient that have the potential to several economic, social and environmental positive development outcomes.

This paper aims to explain the occurrence of sustainable entrepreneurship in the underresearched sub-Saharan Africa context and to improve the understanding of how effectuation manifests in this context.

This study uses a qualitative research approach based on multiple case studies. Responses were sourced from owners, employees, suppliers, the community and customers of sustainable entrepreneurial firms. Data collection methods included in-depth interviews, document reviews and observations. The Gioia analytical approach was used.

Overall, the authors find the concept of effectuation to be well-suited to capturing the processes through which individuals with limited means seek to engage in sustainable entrepreneurship. The authors also identify three pervasive practices that are key to understanding effectuation in the developing country context: complementation of indigenous knowledge with modern science, compassion and pluriactivity.

This study underscores the importance of co-creation, diversification of revenue sources and the role of emotional awareness and interpersonal skills in entrepreneurial endeavors.

This study, therefore, contributes new knowledge about the mechanisms through which entrepreneurs faced with resource constraints use control as opposed to prediction strategies to exploit sustainable entrepreneurship opportunities. In so doing, this study contributes to entrepreneurship theory by proposing the integration of cognitive and affective dimensions in realizing sustainable entrepreneurship goals.

The search for luxurious hospitality experiences increasingly coincides with the imperative to mitigate negative impacts in the pursuit of greater sustainability. This is a task often understood as being complex particularly in the context of luxury hospitality which often resonates with conspicuous consumption. This chapter uses a case study approach to analyze the complex relationship between luxury tourism and sustainability. The study focuses on the development of “luxury” from a materialistic perspective toward an experience economy and relates this to the concept of sustainability and agreements relevant to the tourism industry. The environmental impact of luxury hospitality is then discussed. The case study on properties in Costa Rica, South Africa, the Maldives, Vietnam, and French Polynesia focuses on philosophy, facilities, energy and waste consumption, food and beverage, conservational and educational activities, and alignment to the United Nations Sustainable Development Goals (UN SDGs). The focus is on the properties and shows limitations in that it is not applicable to the whole tourist journey and experience. All properties understand luxury as based on experiences and involvement in nature. Measures to mitigate environmental impact and foster conservational and educational activities are mainstream practices. Comparing the cases with academic literature on luxury, sustainability, ecotourism, and environmental policies underline that sustainability-driven luxury hospitality shows valuable steps toward a more sustainable product but is ultimately faced with the dilemma of taking into consideration and ultimately mitigating the impacts of the entire travel value chain.

This paper aims to prepare new modified alkyd resins and use it as an antimicrobial binder for surface coating applications.

Various modified alkyd resins were prepared by partial replacement of 3,6-dichloro benzo[b]thiophene-2-carbonyl bis-(2-hydroxy ethyl)-amide as a source of polyol with glycerol and confirmed by acid value, FT-IR, 1H-NMR. The modified alkyd resins were covering a wide range of oil lengths and hydroxyl content (0%, 10%, 20% and 30% excess-OH). The antimicrobial activity of the prepared alkyds was also investigated. The coatings of 60 ± 5 µm thickness were applied to the surface of glass panels and mild steel strips by means of a brush. Physico-mechanical tests, chemical resistance and antimicrobial activities were investigated.

The obtained results illustrate that the introduction of benzo[b]thiophene derivative as a modifier polyol within the resin structure improved the film performance and enhanced the physico-mechanical characteristics, chemical resistance and the antimicrobial activities.

The modified alkyd resins can be employed as antimicrobial binders in paint compositions for a variety of surfaces, particularly those that are susceptible to a high number of bacteria.

Modified alkyd resins based on antimicrobial heterocyclic compounds have the potential to be promising in the manufacturing of antimicrobial coatings and development of paints, allowing them to function to prevent the spread of microbial infection, which is exactly what the world requires at this time. Also, they can be applied in different substrates for industrial applications.

Climate-induced damage is a pressing problem for the preservation of cultural properties. Their physical deterioration is often the cumulative effect of different environmental hazards of variable intensity. Among these, fluctuations of temperature and relative humidity may cause nonrecoverable physical changes in building envelopes and artifacts made of hygroscopic materials, such as wood. Microclimatic fluctuations may be caused by several factors, including the presence of many visitors within the historical building. Within this framework, the current work is focused on detecting events taking place in two Norwegian stave churches, by identifying the fluctuations in temperature and relative humidity caused by the presence of people attending the public events.

The identification of such fluctuations and, so, of the presence of people within the churches has been carried out through three different methods. The first is an unsupervised clustering algorithm here termed “density peak,” the second is a supervised deep learning model based on a standard convolutional neural network (CNN) and the third is a novel ad hoc engineering feature approach “unexpected mixing ratio (UMR) peak.”

While the first two methods may have some instabilities (in terms of precision, recall and normal mutual information [NMI]), the last one shows a promising performance in the detection of microclimatic fluctuations induced by the presence of visitors.

The novelty of this work stands in using both well-established and in-house ad hoc machine learning algorithms in the field of heritage science, proving that these smart approaches could be of extreme usefulness and could lead to quick data analyses, if used properly.

This study aims to conduct the domain mapping of consumer behaviour research in the context of solar energy. The study can help in understanding the intellectual structure, evolution of keywords and key research producers (at the author, institutional and source level) related to the domain of solar energy consumer research.

This study uses R-studios’ bibliometrix package for analysing the bibliographical data collected from the Scopus database. Analysis has been conducted at the descriptive level (summary, author, institution and source) and analytical level (co-citation analysis, co-occurrence analysis, thematic maps and historiography).

This study finds out the most relevant authors, institutions and sources using criteria such as production, citations and H-index. Relevant research clusters have been identified using the clustering of authors, co-citations and keywords. Thematic mapping has identified the basic and motor themes. Historical citation analysis shows the direct linkage of previous studies. Overall, this study reports the most relevant bibliometric indicators in the domain of solar energy consumer research.

Identified patterns can help policymakers, business experts, social marketers and energy conservation organisations to study consumer behaviour.

Thiis bibliometric study can effectively assess sustainable development goals and suggest improved action plans.

This study examined bibliometric analysis in solar energy products (SEPs), recognised varied domains of research work on consumers’ intention to purchase solar household products and mapped them into six groups. This study provides an overview of 40 years of research on consumer behaviour towards SEPs and discusses its findings to identify the research gap.

This study aims to assess the effect of water variation on bioethanol production from cassava peels (CP) using Saccharomyces cerevisiae yeast as the ethanologenic agent.

The milled CP was divided into three treatment groups in a small-scale flask experiment where each 20 g CP was subjected to two-stage hydrolysis. Different amount of water was added to the fermentation process of CP. The fermented samples were collected every 24 h for various analyses.

The results of the fermentation revealed that the highest ethanol productivity and fermentation efficiency was obtained at 17.38 ± 0.30% and 0.139 ± 0.003 gL⁻¹ h⁻¹. The study affirmed that ethanol production was increased for the addition of water up to 35% for the CP hydrolysate process.

The finding of this study demonstrates that S. cerevisiae is the key player in industrial ethanol production among a variety of yeasts that produce ethanol through sugar fermentation. In order to design truly sustainable processes, it should be expanded to include a thorough analysis and the gradual scaling-up of this process to an industrial level.

This paper is an original research work dealing with bioethanol production from CP using S. cerevisiae microbe.

1. Hydrolysis of cassava peels using 13.1 M H₂SO₄ at 100 ^oC for 110 min gave high Glucose productivity

2. Highest ethanol production was obtained at 72 h of fermentation using Saccharomyces cerevisiae

3. Optimal bioethanol concentration and yield were obtained at a hydration level of 35% agitation

4. Highest ethanol productivity and fermentation efficiency were 17.3%, 0.139 g.L⁻¹.h⁻¹

Hydrolysis of cassava peels using 13.1 M H₂SO₄ at 100 ^oC for 110 min gave high Glucose productivity

Highest ethanol production was obtained at 72 h of fermentation using Saccharomyces cerevisiae

Optimal bioethanol concentration and yield were obtained at a hydration level of 35% agitation

Highest ethanol productivity and fermentation efficiency were 17.3%, 0.139 g.L⁻¹.h⁻¹

This article introduces the Special Issue on Sustainable Management of Heritage Buildings in long-term perspective.

It starts by reviewing the gaps in knowledge and practice which led to the creation and implementation of the research project SyMBoL—Sustainable Management of Heritage Buildings in long-term perspective funded by the Norwegian Research Council over the 2018–2022 period. The SyMBoL project is the motivation at the base of this special issue.

The editorial paper briefly presents the main outcomes of SyMBoL. It then reviews the contributions to the Special Issue, focussing on the connection or differentiation with SyMBoL and on multidisciplinary findings that address some of the initial referred gaps.

The article shortly summarizes topics related to sustainable preservation of heritage buildings in time of reduced resources, energy crisis and impacts of natural hazards and global warming. Finally, it highlights future research directions targeted to overcome, or partially mitigate, the above-mentioned challenges, for example, taking advantage of no sestructive techniques interoperability, heritage building information modelling and digital twin models, and machine learning and risk assessment algorithms.